Small room fans

Small room fan ECA 100 ipro Standard, DN100Features:Quality Made in Germany, super quiet, two-stage fan connection DN 100, protection rating IP X5 for safety in the bathroom, protection class IIFor a better room climate in the bathroom or WC, the low-noise exhaust fan – the elegant solution against moisture, unpleasant odours and mouldVery easy operation by switching on and off with the light switch – low-maintenance device – straightforward one-person installation with standard tools. Continuous power connection required for run-on (4-core cable to the fan necessary)Attractive design with elegant front panel made of impact-resistant plastic – neutral white similar to RAL 9016, compatible with any bathroom furnishing style. Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/Off via light switch or separate switch. Operation either at stage 1 or stage 2. Two-stage operation possible using a standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 power levels. Concealed intake through design cover. For ventilation. VDE-GS mark, exception: ECA 100 ipro RC/RCH. VDE mark: ECA 100 RC/RCH. Protection rating IP X5 for safety in the bathroom. Protection class II. Suitable for continuous operation. Thermal overload protection. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Very easy installation as the cover can be easily removed with tools. Wall and ceiling mounting possible. Compatible with ECA predecessor models DN 100, as fixing holes and cable entry flush-mounted are in the same place. Electrical connection: Electrical connection flush-mounted. Safety instructions: All ECA 100 ipro devices can be used in protection zone 1 according to DIN VDE 0100-701. See planning notes for details. Article: ECA 100 ipro, version: standard version, air flow volume: 78 m3/h / 92 m3/h, speed: 2100 rpm / 2500 rpm, speed controllable: yes, reversibility: no, SEC average: -10.69 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, rated power: 6 W / 8 W, IMax: 0.06 A, protection rating: IP X5, power supply cable: 3/5 x 1.5 mm2, installation location: ceiling / wall, installation type: surface-mounted, installation position: any, material: plastic, colour: traffic white, similar to RAL 9016, weight: 0.7 kg, weight with packaging: 0.85 kg, flap: none, nominal diameter: 100 mm, width: 159 mm, height: 159 mm, depth: 130 mm, width with packaging: 165 mm, height with packaging: 165 mm, depth with packaging: 145 mm, medium temperature at IMax: 40 °C, sound pressure level: 27 dB(A) / 32 dB(A) / distance 3 m, free-field conditions

ECA 120 VZ - Brief InformationWith fixed inner grille and delay timer switchECA 120 VZ - Product DescriptionVersion with Delay Timer SwitchSwitch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Not speed controllable.FeaturesHigh air volume despite compact design.Combines large air volume with pressure strength.Thermal overload protection.Housing made of impact-resistant plastic.Protection class II.With VDE-GS mark, exception: ECA 120 24 V.With protective seals against the ingress of condensate when installed in ceilings.Speed control optional for ECA fans in standard version.Colour traffic white similar to RAL 9016.MotorRobust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple, quick removal of the cover.Quick fastening of the fan in the duct by 2 clamping springs.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Safety InstructionsECA 120 devices with protection class IP 45 can be used in protection zone 1 according to DIN VDE 0100-701.Details see planning instructions.Installation / Operation / Maintenance Wiring diagramsSafety instructions small room fans: pdf | onlineInstallation instructions: pdf | onlineInstallation notes ArticleECA 120 VZVersionDelay timer switchAir volume170 m³/hSpeed2,600 rpmSpeed controllable−Reversibility−Type of currentAlternating currentRated voltage230 VMains frequency50 Hz / 60 HzPower consumption19 WIMax0.14 AProtection classIP 45Power cable5 x 1.5 mm²Installation locationWallType of installationSurface-mountedInstallation positionAnyMaterialPlasticColourTraffic white, similar to RAL 9016Weight0.9 kgWeight with packaging1.06 kgNominal diameter120 mmWidth171 mmHeight171 mmDepth114 mmWidth with packaging180 mmHeight with packaging180 mmDepth with packaging140 mmMedium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level42 dB(A) / Distance 3 m, free field conditions

Small room fan ECA piano H humidity control, DN100Features:Made in Germany quality, super quiet, fan connection DN 100, protection class IP X4 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity sensor - low-maintenance device. Fan monitors room humidity and vents automatically. Uncomplicated one-man installation with standard tools. Permanent power connection required for adjustable run-on time (4-core cable to fan). Not speed controllable Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Humidity control version with adjustable overrun: Barrier-free product, as it switches on / off automatically. With VDE mark. Switch-on humidity adjustable from approx. 50 % relative humidity to approx. 90 % relative humidity. Can be switched on manually with an additional switch, fan then runs for the set run-on time. Run-on time adjustable from approx. 0.5 min to approx. 18 min. Humidity control has priority. Not speed-controllable. Particularly quiet thanks to innovative piano impeller. Cover can be removed for cleaning without tools. Compatible with ECA 100 ipro and ECA predecessor models DN 100, same position of screw holes and cable entry. Protection class IP X4 for safety in the bathroom. Protection class II. Integrated springless non-return flap, durable and stable. Colour traffic white similar to RAL 9016. Suitable for DN 100 pipe. Housing made of impact-resistant plastic. Thermal overload protection. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation as cover can be removed without tools. Wall and ceiling mounting possible, hole in cover required for ceiling mounting. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA piano devices can be used in protection zone 2 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA piano H, Version: Humidity control with adjustable overrun, Delivery volume: 80 m3/h, Speed: 2400 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 8 W, IMax: 0.06 A, Protection rating: IP X4, Mains cable: 3/5 x 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.5 kg, Weight with packaging: 0.63 kg, Nominal width: 100 mm, Width: 151 mm, Height: 151 mm, Depth: 104 mm, Width with packaging: 160 mm, Height with packaging: 160 mm, Depth with packaging: 130 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 0.5 min - 18 min - Run-on time when using an optional switch (z.B. Light switch) available, sound pressure level: 26 dB(A) / distance 3 m, free field conditions

ECA 120 K small room fan internal shutter, standard, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against humidity, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Speed controllable. With electrically operated internal lock and protective seals to prevent the ingress of condensation water Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: With electrically operated internal lock. Speed controllable. Exception: ECA 150/4 K. Due to the phase control technology, a physically induced humming noise can occur in the lower speed range. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 K, Version: Standard version, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: yes, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.08 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 36 dB(A) / distance 3 m, Free field conditions

ECA 120 KVZ - Brief InformationWith electric internal lock and delay timer switchECA 120 KVZ - Product DescriptionVersion with Delay Timer SwitchWith electrically operated internal lock.Switch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Not speed controllable.FeaturesHigh air volume despite compact design.Combines large air volume with pressure strength.Thermal overload protection.Housing made of impact-resistant plastic.Protection class II.With VDE-GS mark, exception: ECA 120 24 V.With protective seals against the ingress of condensate when ceiling mounted.Speed control optional for ECA fans in standard version.Colour traffic white similar to RAL 9016.MotorRobust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple, quick removal of the cover.Quick fastening of the fan in the duct by 2 clamping springs.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Safety InstructionsECA 120 devices with protection class IP 45 can be used in protection zone 1 according to DIN VDE 0100-701.Details see planning instructions.Installation / Operation / Maintenance Wiring DiagramsSafety instructions for small room fans: pdf | onlineInstallation instructions: pdf | onlineInstallation Instructions ArticleECA 120 KVZVersionDelay timer switchAir volume180 m³/hSpeed2,600 1/minSpeed controllable−Reversibility−Type of voltageAlternating currentRated voltage230 VMains frequency50 Hz / 60 HzPower consumption19 WIMax0.14 AProtection classIP 34Power cable5 x 1.5 mm²Installation locationWallType of installationSurface-mountedInstallation positionAnyMaterialPlasticColourTraffic white, similar to RAL 9016Weight0.9 kgWeight with packaging1.06 kgType of flapElectricNominal size120 mmWidth171 mmHeight171 mmDepth114 mmWidth with packaging180 mmHeight with packaging180 mmDepth with packaging140 mmMedium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level36 dB(A) / Distance 3 m, free field conditions

Small room fan ECA 120 24 V safety extra-low voltage, DN120Features:Made in Germany quality, super quiet, fan fastening with 2 clamping springs in the pipe, protection class IP 45 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldOn/off switch via electrical connection, optionally surface-mounted or flush-mounted - low-maintenance device. Use only with approved safety transformer. Uncomplicated one-man installation with standard tools. Protective seal against condensation.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with safety extra-low voltage: Rated voltage 24 V, 50 Hz. Use only with approved safety transformer (on site, 230 V/24 V). Combination with delay timer VZ 6, VZ 12 or VZ 24 C (see accessories) possible. Install the delay timers between the switch (230 V) and the input side of the safety transformer. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with pressure strength. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 24 V, Version: Safety extra-low voltage, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 24 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 1.2 A, Protection rating: IP 45, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Nominal diameter: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

ECA 120 KF small room fan internal shutter, light, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via light control - low-maintenance device. Uncomplicated one-man installation with standard tools. Continuous power connection required for adjustable run-on time (4-core cable to fan). Not speed-controllable. Protective seals against condensationAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with light control: With electrically operated inner lock. Barrier-free product, as it switches on and off automatically. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 seconds. Run-on time approx. 6 minutes. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 KF, Version: Light control, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 36 dB(A) / distance 3 m, Free-field conditions

ECA 120 F small room fan with internal grille and light, DN120Features:Made in Germany quality, super quiet, fan fastening with 2 clamping springs in the pipe, protection class IP 45 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product as it switches on/off automatically via minimum brightness in the room - low-maintenance device. Uncomplicated one-man installation with standard tools. Switch-on delay and run-on time. No rotary switch control and with fixed inner grille. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Switching variant: With an additional switch, the fan can be switched off independently of the room lighting (see wiring diagrams on the Internet). Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 F, Version: Light control, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 45, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.065 kg, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

ECA 120 KP - Brief InformationWith electric internal lock and pull cord switchECA 120 KP - Product DescriptionVersion with Pull Cord SwitchWith electrically operated internal lock.With pull cord switch and pull cord.Not speed controllable.FeaturesHigh air volume despite compact design.Combines large air volume with pressure strength.Thermal overload protection.Housing made of impact-resistant plastic.Protection class II.With VDE-GS mark, exception: ECA 120 24 V.With protective seals against the ingress of condensate water when installed in ceilings.Speed control optional for ECA fans in standard version.Colour traffic white similar to RAL 9016.MotorRobust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple, quick removal of the cover.Quick fastening of the fan in the duct by 2 clamping springs.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Safety InstructionsECA 120 devices with protection class IP 45 can be used in protection zone 1 according to DIN VDE 0100-701.Details see planning instructions.

Small room fan ECA 150 ipro standard version, DN150Features:Quality Made in Germany, Super quiet, two-stage fan connection DN 150, Protection class IP X5 for safety in the kitchen, Protection class IIFor a better indoor climate in the kitchen or cellar, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for run-on time (4-core cable to fan required) Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any kitchen furnishing styleSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Can be operated in two stages using a standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. Combines high flow volume with high pressure. With VDE-GS mark. Protection class IP X5 for safety in the bathroom. Protection class II. Thermal overload protection. Suitable for continuous operation. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Compatible with ECA predecessor models DN 150, as the fixing holes and flush-mounted cable entry are in the same place. Wall and ceiling mounting possible. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: All ECA 150 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 150 ipro, Version: Standard version, Delivery volume: 200 m3/h / 250 m3/h, Speed: 1672 1/min / 2189 1/min, Speed controllable: yes, Reversible: no, SEC average: -11.18 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 15 W / 19 W, IMax: 0.09 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.6 kg, Weight with packaging: 1.885 kg, Flap: None, Nominal width: 150 mm, Width: 228 mm, Height: 228 mm, Depth: 123.3 mm, Width with packaging: 235 mm, Height with packaging: 235 mm, Depth with packaging: 200 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 33 dB(A) / 40 dB(A) / distance 3 m, Free field conditions

Small room fan AKE 150 Basement dehumidification, 250 m3/h, DN 150 AKE 150/1 - Brief InformationAutomatic basement dehumidification, DN 150, air volume 250 m³/hAKE 150/1 - Product DescriptionDesignApplication area up to approx. 70 m² per fan.Versatile system expandability: connection of a supply air fan (e.g. ECA 15/4 E) possible to increase air exchange.FeaturesFully automatic, intelligent basement dehumidification for the highest demands.Permanent comparison of absolute humidity indoors and outdoors: fan ventilates independently when the absolute humidity inside is higher than outside.No maintenance or manual control required: install once and the system operates automatically.Additional fans without their own dew point control can be connected directly to the AKE up to max. 1.2 A and benefit from the intelligence.Fans > 1.2 A can be connected via an intermediate relay or contactor, allowing larger or multiple rooms to be dehumidified via the AKE.Concealed intake through design cover.Barrier-free product, as automatic switching on/off without additional switches.Fan monitors room humidity.Frost protection function: system switches off automatically at indoor temperatures below 5 °C.Garage dehumidification: optional deactivation of frost protection for unheated rooms.Additional manual operation for 30 minutes can be switched on and off via a push button.No additional installation of a switch to the device necessary.Additional manual operation with external push button or switch possible.Automatic push button / switch detection.Status and function display via LEDs.Scope of delivery:FanExternal closure flapSensors1.5 m connection cableTraffic white colour, similar to RAL 9016.Housing made of impact-resistant plastic.Thermal overload protection.Protection class II.Frost ProtectionTo prevent the room from cooling down, the AKE has a frost protection function. The fan switches off automatically at indoor temperatures below 5 °C.Garage DehumidificationThe frost protection function of the AKE can be bypassed via DIP switch to allow year-round dehumidification of unheated rooms.MotorEnergy-saving, robust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple installation:AKE 100: Core hole drilling 105 mm, or 120 mm when installed with accessory wall sleeve WH 100.AKE 150: Core hole drilling 155 mm, or 170 mm when installed with wall sleeve WH 150.Wall and ceiling mounting possible.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Surface-mounted installation for AKE 100 with accessory spacer frame ECA-DR.Installation / Operation / Maintenance Wiring diagramsInstallation manual: pdf | onlineSafety instructions Small room fans: pdf | online ArticleAKE 150/1Air volume250 m³/hSpeed2,189 1/minSpeed controllable−Reversibility−SEC average-24.48 kWh/(m²*a)Type of currentAlternating currentRated voltage230 VMains frequency50 HzRated power19 WStand-by power consumption2 WIMax0.09 AProtection typeIP X4Power cable5 x 1.5 mm²Installation locationWallPlace of installationBasement / GarageType of installationSurface-mountedInstallation positionAnyMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.8 kgWeight with packaging2.37 kgNominal diameter150 mmCable length1.5 mWidth228 mmHeight228 mmDepth178.3 mmWidth with packaging303 mmHeight with packaging273 mmDepth with packaging303 mmWall thicknessmax. 0.85 m (if 1 m cable length is not sufficient, please order the 6 m sensor cable additionally)Medium temperature at IMax40 °CSound pressure level40 dB / Distance 3 m, free field conditions

ECA 120 - Brief InformationWith fixed inner grilleECA 120 - Product DescriptionStandard VersionSpeed controllable.Due to the phase-cutting technology, a physically caused humming noise may occur at low speeds.FeaturesHigh delivery volume despite compact design.Combines large delivery volume with pressure strength.Thermal overload protection.Housing made of impact-resistant plastic.Protection class II.With VDE-GS mark, exception: ECA 120 24 V.With protective seals against the ingress of condensate when installed in ceilings.Speed control optionally available for ECA fans in standard version.Colour traffic white similar to RAL 9016.MotorRobust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple, quick removal of the cover.Quick fastening of the fan in the duct by 2 clamping springs.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Safety InstructionsECA 120 devices with protection class IP 45 can be used in protection zone 1 according to DIN VDE 0100-701.Details see planning instructions.Installation / Operation / Maintenance Wiring diagramsSafety instructions small room fans: pdf | onlineInstallation instructions: pdf | onlineInstallation instructions ArticleECA 120VersionStandard versionDelivery volume170 m³/hSpeed2,600 1/minSpeed controllable✔Reversibility−Type of voltageAlternating currentRated voltage230 VMains frequency50 Hz / 60 HzPower consumption19 WIMax0.14 AProtection classIP 45Power cable3 x 1.5 mm²Installation locationWallInstallation typeSurface-mountedInstallation positionAnyMaterialPlasticColourTraffic white, similar to RAL 9016Weight0.9 kgWeight with packaging1.05 kgNominal size120 mmWidth171 mmHeight171 mmDepth114 mmWidth with packaging180 mmHeight with packaging180 mmDepth with packaging140 mmMedium temperature at IMax40 °CSound pressure level42 dB(A) / Distance 3 m, free-field conditions