Badlüfter

Small room fan ECA 100 ipro Standard, DN100Features:Made in Germany quality, super quiet, two-stage fan connection DN 100, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC,The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on and off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for overrun (4-core cable to fan required)Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Two-stage operation using standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. VDE-GS mark, exception: ECA 100 ipro RC/RCH. VDE mark: ECA 100 RC/RCH. Protection class IP X5 for safety in the bathroom. Protection class II. Suitable for continuous operation. Thermal overload protection. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation, as cover can be easily removed with tools. Wall and ceiling mounting possible. Compatible with ECA predecessor models DN 100, as the fixing holes and flush-mounted cable entry are in the same place. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA 100 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 100 ipro, Version: Standard version, Delivery volume: 78 m3/h / 92 m3/h, Speed: 2100 1/min / 2500 1/min, Speed controllable: yes, Reversible: no, SEC average: -10.69 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 6 W / 8 W, IMax: 0.06 A, Protection rating: IP X5, Mains cable: 3/5 x 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.7 kg, Weight with packaging: 0.85 kg, Flap: none, Nominal width: 100 mm, Width: 159 mm, Height: 159 mm, Depth: 130 mm, Width with packaging: 165 mm, Height with packaging: 165 mm, Depth with packaging: 145 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 27 dB(A) / 32 dB(A) / distance 3 m, Free field conditions

Small room fan ECA piano H humidity control, DN100Features:Made in Germany quality, super quiet, fan connection DN 100, protection class IP X4 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity sensor - low-maintenance device. Fan monitors room humidity and vents automatically. Uncomplicated one-man installation with standard tools. Permanent power connection required for adjustable run-on time (4-core cable to fan). Not speed controllable Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Humidity control version with adjustable overrun: Barrier-free product, as it switches on / off automatically. With VDE mark. Switch-on humidity adjustable from approx. 50 % relative humidity to approx. 90 % relative humidity. Can be switched on manually with an additional switch, fan then runs for the set run-on time. Run-on time adjustable from approx. 0.5 min to approx. 18 min. Humidity control has priority. Not speed-controllable. Particularly quiet thanks to innovative piano impeller. Cover can be removed for cleaning without tools. Compatible with ECA 100 ipro and ECA predecessor models DN 100, same position of screw holes and cable entry. Protection class IP X4 for safety in the bathroom. Protection class II. Integrated springless non-return flap, durable and stable. Colour traffic white similar to RAL 9016. Suitable for DN 100 pipe. Housing made of impact-resistant plastic. Thermal overload protection. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation as cover can be removed without tools. Wall and ceiling mounting possible, hole in cover required for ceiling mounting. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA piano devices can be used in protection zone 2 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA piano H, Version: Humidity control with adjustable overrun, Delivery volume: 80 m3/h, Speed: 2400 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 8 W, IMax: 0.06 A, Protection rating: IP X4, Mains cable: 3/5 x 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.5 kg, Weight with packaging: 0.63 kg, Nominal width: 100 mm, Width: 151 mm, Height: 151 mm, Depth: 104 mm, Width with packaging: 160 mm, Height with packaging: 160 mm, Depth with packaging: 130 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 0.5 min - 18 min - Run-on time when using an optional switch (z.B. Light switch) available, sound pressure level: 26 dB(A) / distance 3 m, free field conditions

ECA 120 K small room fan internal shutter, standard, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against humidity, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Speed controllable. With electrically operated internal lock and protective seals to prevent the ingress of condensation water Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: With electrically operated internal lock. Speed controllable. Exception: ECA 150/4 K. Due to the phase control technology, a physically induced humming noise can occur in the lower speed range. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 K, Version: Standard version, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: yes, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.08 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 36 dB(A) / distance 3 m, Free field conditions

Small room fan ECA 150 ipro standard version, DN150Features:Quality Made in Germany, Super quiet, two-stage fan connection DN 150, Protection class IP X5 for safety in the kitchen, Protection class IIFor a better indoor climate in the kitchen or cellar, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for run-on time (4-core cable to fan required) Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any kitchen furnishing styleSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Can be operated in two stages using a standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. Combines high flow volume with high pressure. With VDE-GS mark. Protection class IP X5 for safety in the bathroom. Protection class II. Thermal overload protection. Suitable for continuous operation. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Compatible with ECA predecessor models DN 150, as the fixing holes and flush-mounted cable entry are in the same place. Wall and ceiling mounting possible. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: All ECA 150 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 150 ipro, Version: Standard version, Delivery volume: 200 m3/h / 250 m3/h, Speed: 1672 1/min / 2189 1/min, Speed controllable: yes, Reversible: no, SEC average: -11.18 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 15 W / 19 W, IMax: 0.09 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.6 kg, Weight with packaging: 1.885 kg, Flap: None, Nominal width: 150 mm, Width: 228 mm, Height: 228 mm, Depth: 123.3 mm, Width with packaging: 235 mm, Height with packaging: 235 mm, Depth with packaging: 200 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 33 dB(A) / 40 dB(A) / distance 3 m, Free field conditions