Individual ventilation systems

MAICO ER 100 VZC-2 Ventilatoreinsatz mit Verzögerungszeitschalter – 101 m³/hDer MAICO ER 100 VZC-2 ist ein hochwertiger Ventilatoreinsatz für die kontrollierte Entlüftung von Bad, WC und anderen innenliegenden Räumen. Mit einem Fördervolumen von 101 m³/h eignet sich der Ventilator ideal für die zuverlässige Einzelraum- oder Zweiraumentlüftung und wird in die MAICO Unterputzgehäuse ER-UP/G, ER-UPD oder ER-UPB eingesetzt.Die Ausführung VZC-2 verfügt über einen einstellbaren Verzögerungszeitschalter. Sowohl die Einschaltverzögerung als auch die Nachlaufzeit können individuell an die jeweiligen Anforderungen angepasst werden. Dadurch wird eine bedarfsgerechte und energieeffiziente Entlüftung ermöglicht.Der integrierte ISO Coarse 30 % (G2) Luftfilter schützt den Ventilator zuverlässig vor Verschmutzungen und lässt sich ohne Werkzeug in wenigen Sekunden wechseln.Die Montage erfolgt besonders komfortabel über die Schnappbefestigung sowie eine elektrische Steckverbindung. Durch die um ±5° drehbare Abdeckung können kleine Einbauungenauigkeiten einfach ausgeglichen werden.Der robuste, energiesparende Kondensatormotor arbeitet wartungsfrei, ist mit beidseitig geschlossenen Kugellagern ausgestattet und verfügt über einen thermischen Überlastungsschutz für eine lange Lebensdauer.Dank der Schutzart IPX5 eignet sich der Ventilatoreinsatz auch für den Einsatz in Bereich 1 nach DIN VDE 0100-701 und kann selbst in Bereichen mit Strahlwasser installiert werden.Vorteile auf einen BlickVentilatoreinsatz für MAICO UnterputzgehäuseFördervolumen 101 m³/hEinstellbare Einschaltverzögerung 0 / 50 / 100 / 150 SekundenEinstellbare Nachlaufzeit ca. 3 / 6 / 15 / 24 MinutenIntegrierter ISO Coarse 30 % (G2) FilterWerkzeugloser FilterwechselRobuster, wartungsfreier KondensatormotorThermischer ÜberlastungsschutzAbdeckung um ±5° drehbarSchutzart IPX5Schutzklasse IIMit VDE-ZeichenTechnische DatenHersteller: MAICOTyp: ER 100 VZC-2Produkttyp: VentilatoreinsatzFördervolumen: 101 m³/hAusführung: Mit VerzögerungszeitschalterEinschaltverzögerung: 0 / 50 / 100 / 150 sNachlaufzeit: ca. 3 / 6 / 15 / 24 minDrehzahlregelung: Nicht möglichFilter: ISO Coarse 30 % (G2)Farbe: Verkehrsweiß, ähnlich RAL 9016Schutzart: IPX5Schutzklasse: IIMotor: Energiesparender KondensatormotorLagerung: Wartungsfreie KugellagerÜberlastschutz: ThermischMontage: Schnappbefestigung mit elektrischer SteckverbindungKompatible UnterputzgehäuseMAICO ER-UP/GMAICO ER-UPDMAICO ER-UPBAnwendungsbereicheBadezimmerGäste-WCToilettenHauswirtschaftsräumeAbstellräumeInnenliegende Räume ohne FensterEinzelraum- und ZweiraumentlüftungBesondere Eigenschaften✔ Einstellbare Ein- und Nachlaufverzögerung✔ Hohe Druckleistung für lange Rohrsysteme✔ Werkzeugloser Filterwechsel✔ Wartungsfreier Kugellagermotor✔ Thermischer Motorschutz✔ Einfache Steckmontage✔ Drehbare Abdeckung zum Ausgleich von Einbautoleranzen✔ Geeignet für Feuchträume gemäß DIN VDE 0100-701✔ TÜV-geprüfte Volumenstromkennlinie und Leckluftrate✔ VDE-geprüfte SicherheitDer MAICO ER 100 VZC-2 überzeugt durch seine hohe Druckleistung, den energieeffizienten Motor und die individuell einstellbare Zeitsteuerung. In Verbindung mit den MAICO Unterputzgehäusen eignet sich der Ventilatoreinsatz ideal für eine zuverlässige, leise und langlebige Entlüftung von Bädern, WCs und anderen innenliegenden Räumen mit erhöhtem Luftförderbedarf.

MAICO ER 60 VZC-2 Ventilatoreinsatz mit Verzögerungszeitschalter – 62 m³/hDer MAICO ER 60 VZC-2 ist ein hochwertiger Ventilatoreinsatz für die kontrollierte Entlüftung von Bad, WC und anderen innenliegenden Räumen. Mit einem Fördervolumen von 62 m³/h eignet sich der Ventilator ideal für die zuverlässige Einzelraum- oder Zweiraumentlüftung und wird in die MAICO Unterputzgehäuse ER-UP/G, ER-UPD oder ER-UPB eingesetzt.Die Ausführung VZC-2 verfügt über einen einstellbaren Verzögerungszeitschalter. Sowohl die Einschaltverzögerung als auch die Nachlaufzeit können individuell an die jeweiligen Anforderungen angepasst werden. Dadurch wird eine bedarfsgerechte und energieeffiziente Entlüftung ermöglicht.Der integrierte ISO Coarse 30 % (G2) Luftfilter schützt den Ventilator zuverlässig vor Verschmutzungen und lässt sich ohne Werkzeug in wenigen Sekunden wechseln.Die Montage erfolgt besonders komfortabel über die Schnappbefestigung sowie eine elektrische Steckverbindung. Durch die um ±5° drehbare Abdeckung können kleine Einbauungenauigkeiten einfach ausgeglichen werden.Der robuste, energiesparende Kondensatormotor arbeitet wartungsfrei, ist mit beidseitig geschlossenen Kugellagern ausgestattet und verfügt über einen thermischen Überlastungsschutz für eine lange Lebensdauer.Dank der Schutzart IPX5 eignet sich der Ventilatoreinsatz auch für den Einsatz in Bereich 1 nach DIN VDE 0100-701 und kann selbst in Bereichen mit Strahlwasser installiert werden.Vorteile auf einen BlickVentilatoreinsatz für MAICO UnterputzgehäuseFördervolumen 62 m³/hEinstellbare Einschaltverzögerung 0 / 50 / 100 / 150 SekundenEinstellbare Nachlaufzeit ca. 3 / 6 / 15 / 24 MinutenIntegrierter ISO Coarse 30 % (G2) FilterWerkzeugloser FilterwechselRobuster, wartungsfreier KondensatormotorThermischer ÜberlastungsschutzAbdeckung um ±5° drehbarSchutzart IPX5Schutzklasse IIMit VDE-ZeichenTechnische DatenHersteller: MAICOTyp: ER 60 VZC-2Produkttyp: VentilatoreinsatzFördervolumen: 62 m³/hAusführung: Mit VerzögerungszeitschalterEinschaltverzögerung: 0 / 50 / 100 / 150 sNachlaufzeit: ca. 3 / 6 / 15 / 24 minDrehzahlregelung: Nicht möglichFilter: ISO Coarse 30 % (G2)Farbe: Verkehrsweiß, ähnlich RAL 9016Schutzart: IPX5Schutzklasse: IIMotor: Energiesparender KondensatormotorLagerung: Wartungsfreie KugellagerÜberlastschutz: ThermischMontage: Schnappbefestigung mit elektrischer SteckverbindungKompatible UnterputzgehäuseMAICO ER-UP/GMAICO ER-UPDMAICO ER-UPBAnwendungsbereicheBadezimmerGäste-WCToilettenHauswirtschaftsräumeAbstellräumeInnenliegende Räume ohne FensterEinzelraum- und ZweiraumentlüftungBesondere Eigenschaften✔ Einstellbare Ein- und Nachlaufverzögerung✔ Hohe Druckleistung für lange Rohrsysteme✔ Werkzeugloser Filterwechsel✔ Wartungsfreier Kugellagermotor✔ Thermischer Motorschutz✔ Einfache Steckmontage✔ Drehbare Abdeckung zum Ausgleich von Einbautoleranzen✔ Geeignet für Feuchträume gemäß DIN VDE 0100-701✔ TÜV-geprüfte Volumenstromkennlinie und Leckluftrate✔ VDE-geprüfte SicherheitDer MAICO ER 60 VZC-2 überzeugt durch seine hohe Druckleistung, den energieeffizienten Motor und die individuell einstellbare Zeitsteuerung. In Verbindung mit den MAICO Unterputzgehäusen eignet sich der Ventilatoreinsatz ideal für eine zuverlässige, leise und langlebige Entlüftung von Bädern, WCs und anderen innenliegenden Räumen.

ER-UPD EC - Brief InformationFlush-mounted casing with fire protection shut-off device for accommodating an ER EC / ER EC 2.1 fan. Two-room connection possible on right/left/bottom.ER-UPD EC - Product DescriptionVersionSingle-room ventilationFire protection casing for accommodating an ER EC / ER EC 2.1 fan.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal outlet nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap for simple and quick cleaning.Installation possible inside the shaft in wall and ceiling.Approved for wall installation with outlet direction upwards, right or left, as well as ceiling installation.Low installation depth of the flush-mounted casing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the casing.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-46.Approval certificates available on request or on our website www.maico-ventilatoren.com.Single-room VentilationFlush-mounted casing for accommodating an ER EC & ER EC 2.1 fan.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal outlet nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap for simple and quick cleaning.Installation outside the shaft in wall and ceiling possible.Approved for outlet direction upwards, right or left.Low installation depth of the flush-mounted casing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the casing.Predefined breaking points in the casing for use of the ER-AS extraction nozzle for WC seat ventilation.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-XXApproval certificates available on request or on our website www.maico-ventilatoren.com.Two-room VentilationTwo-room connection set ER-ZR for two-room ventilation.The ER-UPD-EC casing has predefined breaking points for the additional connection nozzle on the right, left and bottom.Fan types suitable for two-room ventilation according to DIN 18017-3: ER EC & ER EC 2.1 with ER-AK NFC/-AH NFC/-AB NFC.Main room: 60 m³/hSecond room: 40 m³/h ArticleER-UPD ECVersionMetal outlet nozzle on the side with metal shut-off flap with automatic release device, without fire protection casing, two-room connection possible on right/left/bottomAir directionExhaust airInstallation locationWall / CeilingType of installationFlush-mountedMaterialPlasticColourBlackWeight0.66 kgWeight with packaging0.93 kgFire protectionYesOutlet directionSidewaysConnection diameter75 mm / 80 mmWidth225 mmHeight225 mmDepth108 mmWidth with packaging310 mmHeight with packaging240 mmDepth with packaging120 mmPackaging unit1 pieceRangeBGTIN (EAN)4012799322054Article number0093.1767

ER-UPB EC - Brief InformationFire protection flush-mounted housing with fire protection shut-off device for all fire protection systems to accommodate a fan ER EC/ ER EC 2.1ER-UPB EC - Product DescriptionVersionFire protection housing to accommodate a fan ER EC / ER EC 2.1.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap, allowing simple and quick cleaning.Installation possible within the shaft in wall and ceiling.Approved for wall installation with exhaust direction upwards, right or left, as well as ceiling installation.Low installation depth of the flush-mounted housing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the housing.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-46.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Single Room VentilationFlush-mounted housing to accommodate a fan ER EC / ER EC2.1Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap, allowing simple and quick cleaning.Installation possible within the fire protection shaft in wall and ceiling.Approved for exhaust direction upwards, right or left.Low installation depth of the flush-mounted housing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the housing.Predefined breaking points in the housing for use of the extraction nozzle ER-AS for WC seat ventilation.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-XXApproval certificates available on request or on our homepage www.maico-ventilatoren.com. ArticleER-UPB ECVersionMetal exhaust nozzle on the side with metal shut-off flap with automatic release device, with fire protection housing, no two-room connection possibleAir directionVentilationInstallation locationWall / CeilingType of installationFlush-mountedMaterialPlasticColourBlackWeight2.59 kgWeight with packaging2.9 kgFire protectionYesExhaust directionSidewaysConnection diameter75 mm / 80 mmWidth249 mmHeight249 mmDepth120 mmWidth with packaging285 mmHeight with packaging350 mmDepth with packaging140 mmPackaging unit1 pieceRangeBGTIN (EAN)4012799322061Article number0093.1768

ER-AB NFC - Brief InformationCover for ER EC fan unit, version with motion detector, intelligent timer module and NFC interfaceER-AB NFC - Product DescriptionER-AB NFC - Version with Motion Detector, Intelligent Timer Module and NFC InterfaceCover with motion detector, intelligent timer module, LED filter change indicator and NFC interface.Barrier-free product due to automatic switching on/off via integrated motion detector.All settings via intuitive, capacitive control surface, no intervention on the circuit board or handling of 230 V components necessary.Individual adjustment of the air volume (15-100 m³/h) possible.Electrical plug connection for quick, tool-free connection of the cover to the fan.Control of the full load stage via motion detector. After detected movement, the full load stage is activated without switch-on delay.Range of the motion detector: 5 m.Switching on/off of the full load stage via light switch or separate switch possible, with adjustable switch-on delay (0-120 sec).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable run-on time of the full load stage (0-30 min).Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilation of irregularly used rooms.Configuration lock prevents unwanted interventions by unauthorized users.Protocol function of the MAICO@NFC app enables time-saving documentation of configurations and device information.Acceptance & service protocols can be exported directly as PDF via the MAICO@NFC app.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, stylish design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection class IP X5 for safety in the bathroom.Traffic white colour similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting ArticleER-AB NFCVersionMotion detector with intelligent timer module and NFC parameterisationAir volume15 m³/h / 20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / steps variable in 5 m³/h increments from 15 - 100 m³/h adjustable. ER-A: Stage 1 = 30 m³/h, Stage 2 = 60 m³/h. -AB: ER-AK/ER Stage 1 and Stage 2 = variable in 5 m³/h increments from 15 - 100 m³/h. ER-AH: Stage 1 = 15-40 m³/h, Stage 2 = 60-100 m³/h each adjustable in 5 m³/h incrementsAir directionExhaustProtection classIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourTraffic white, similar to RAL 9016Weight0.59 kgWeight with packaging0.75 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging295 mmHeight with packaging305 mmDepth with packaging47 mmConveyed medium temperature at IMax40 °CSound pressure level17 dB(A) / 17 dB(A) / 18 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH; 25 dB(A) / 25 dB(A) / 28 dB(A) / 32 dB(A) / 41 dB(A) / 50 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799844624Article number0084.0462

ER-AK NFC - Brief InformationCover for ER EC fan unit, comfort version with timer module and NFC interfaceER-AK NFC - Product DescriptionER-AK NFC - Comfort Version with Intelligent Timer ModuleCover with intelligent timer module, LED filter change indicator and NFC interface.All settings via the intuitive MAICO@NFC APP, no intervention on the circuit board or handling of 230 V components.Individual adjustment of the air volume (15-100 m³/h) possible.Electrical plug connection for quick tool-free connection of the cover to the fan.Switching the full load stage on/off via light switch or separate switch possible, with adjustable switch-on delay (0/-120 sec).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable run-on time of the full load stage (0-30 min).Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilating irregularly used rooms.Configuration lock prevents unwanted changes by unauthorized users.MAICO@NFC-App protocol function enables time-saving documentation of configurations and device information.Acceptance & service protocols can be exported directly as PDF via the MAICO@NFC-App.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, attractive design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection class IP X5 for safety in the bathroom.Colour traffic white similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting ItemER-AK NFCVersionComfort with intelligent timer module and NFC parameterisationAir volume15 m³/h / 20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / steps variable in 5 m³/h increments from 15 - 100 m³/h adjustable. ER-A: Stage 1 = 30 m³/h, Stage 2 = 60 m³/h. -AB: ER-AK/ER Stage 1 and Stage 2 = variable in 5 m³/h increments from 15 - 100 m³/h. ER-AH: Stage 1 = 15-40 m³/h, Stage 2 = 60-100 m³/h each adjustable in 5 m³/h incrementsAir directionExhaustProtection classIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourtraffic white, similar to RAL 9016Weight0.59 kgWeight with packaging0.75 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging295 mmHeight with packaging305 mmDepth with packaging47 mmConveyed medium temperature at IMax40 °CSound pressure level17 dB(A) / 17 dB(A) / 18 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH; 25 dB(A) / 25 dB(A) / 28 dB(A) / 32 dB(A) / 41 dB(A) / 50 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799844600Article number0084.0460

ER-AH NFC - Brief InformationCover for ER EC fan insert, version with humidity control, intelligent timer module and NFC interfaceER-AH NFC - Product DescriptionER-AH – Version with intelligent timer module, humidity control and NFC interfaceCover with humidity control, intelligent timer module, LED filter change indicator and NFC interface.Accessible product due to automatic on/off via intelligent humidity control.All settings via the intuitive MAICO@NFC APP, no intervention on the circuit board or handling of 230 V components.Individual adjustment of the air volume (base load 15-40 m³/h, nominal load 40-100 m³/h) possible.Electrical plug connection for quick, tool-free connection of the cover to the fan.Selectable humidity control automatic or manual via MAICO@NFC.Intelligent humidity control with seasonal adjustment. Stepless adjustment of the air volume between 30 m³/h and the set nominal load V2 based on the relative room humidity. No setting of the switch-on humidity necessary. The fan independently monitors the room humidity and ventilates automatically.Selectable manual humidity control with 2 adjustable switch-on points for relative humidity, as well as the air volumes.Switching on/off of the full load stage via light switch or separate switch possible, with adjustable switch-on delay (0/-120 sec).Adjustable run-on time of the full load stage (0-30 min).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilation of irregularly used rooms.Adjustable device lock (tenant protection).The digital logging function of the MAICO@NFC App enables time-saving documentation of configurations and device information.Created acceptance and service protocols can be exported directly as PDF files.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, stylish design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection rating IP X5 for safety in the bathroom.Colour traffic white similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting

Surface-mounted housing ER GH APB with metal spigot and fire protectionFeatures:Quality in Germany, DN 75/80, protection class IP X5 for safety in the bathroomSurface-mounted housing with maintenance-free metal fire damper - for easy installation on the ceiling or wallUncomplicated one-man installation with standard tools - low-maintenance device. Self-contained metal fire damper with simultaneous function as a cold smoke barrier. Rotatable housing with the option of connecting the outlet spigot to the top left or right of the main duct. Electrical connection at the rear. Electrical wiring on practical pin terminal blockAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Normally flammable in accordance with DIN 4102-1 class B 2Description:Version with fire protection: Surface-mounted housing with maintenance-free fire protection metal shut-off damper against fire transmission K90-18017. Automatic fire protection metal shut-off damper with simultaneous function as cold smoke barrier. Special features: For applications in accordance with DIN 18017-3. Surface-mounted housing to accommodate the ER EC fan insert in combination with the covers from the ER-A... series. Installation in bathrooms, WCs and domestic kitchens. Wall or ceiling mounting possible. Housing can be swivelled, allowing connection of the outlet spigot to the top left or top right of the main duct. Electrical connection at the rear. Simple electrical wiring on practical pin header terminal. Connection diameter DN 75/80. Plastic parts normally flammable to DIN 4102-1 class B 2 (to EN 13501-1). Colour traffic white similar to RAL 9016. Simple Montage.Artikel: ER GH APB, Version: with fire protection, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, Housing material: ABS plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.866 kg, Weight with packaging: 1.058 kg, Fire protection: yes, Air outlet direction: rear, Connection diameter: 75 mm / 80 mm, Width: 276 mm, Height: 276 mm, Depth: 180 mm, Width with packaging: 350 mm, Height with packaging: 140 mm, Depth with packaging: 290 mm

ER 100 - Brief InformationFan unit with cover and filter for installation in flush-mounted housing, air volume 101 m³/hER 100 - Product DescriptionStandard VersionER 100: Speed controllable.ER 60: Not speed controllable.FeaturesFan with cover and ISO Coarse 30 % (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Volume flow characteristic and leakage rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER 100VersionStandard versionAir volume101 m³/hSpeed1,900 1/minAir directionExhaust airSpeed controllable✔SEC average-6.66 kWh/(m²*a)Type of voltageAlternating currentRated voltage230 VMains frequency50 HzPower consumption29 WIMax0.14 AProtection classIP X5Power cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.47 kgWeight with packaging1.75 kgFilter classISO Coarse 30 % (G2)Discharge directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmMedium temperature at IMax40 °CSound pressure level45 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

ER 60 VZ - Brief InformationFan unit with cover and filter for installation in flush-mounted housing, air volume 62 m³/h, with delay timer switchER 60 VZ - Product DescriptionVersion with Delay Timer SwitchSwitch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Not speed controllable.FeaturesFan with cover and ISO Coarse 30 % (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Airflow characteristic curve and leakage rate tested by TÜV Bayern e.V. Leakage airflow volume < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER 60 VZVersionDelay timer switchAir volume62 m³/hSpeed1,250 1/minAir directionExhaust airSpeed controllable−SEC average-3.43 kWh/(m²*a)Voltage typeAlternating currentRated voltage230 VMains frequency50 HzPower consumption21 WIMax0.16 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.5 kgWeight with packaging1.78 kgFilter classISO Coarse 30 % (G2)Discharge directionSidewaysWidth250 mmHeight250 mmDepth140 mmWidth with packaging285 mmHeight with packaging285 mmDepth with packaging155 mmTransport medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level36 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Fan insert ER EC 2.1 for flush-mounted housing ER GH and surface-mounted housing ER GHFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom, installation in protection zone 1 possible For a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Two-stage motor with automatic thermal overload protection. Switch-on delay and run-on time. Can be used for flush and surface mounting. Discharge adapter for side and rear discharge included as standard. Attractive design with elegant front panel made of impact-resistant plastic - Compatible with any bathroom furnishing style Housing made of impact-resistant plasticThermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Special features: Robust, constant-volume, energy-saving and sound-optimised EC motor. Lowest power consumption. Can be used for flush-mounted and surface-mounted applications. Ventilation solution in accordance with DIN 18017-3 (single-pipe ventilation). DIBt approval applied for. Protection class IP X5, installation in protection zone 1 possible. The ER EC fan insert can be combined with the four existing covers ER-A, ER-AK, ER-AH, ER-AB and adapted to the application situation. Can be used in conjunction with the ER-RPK replacement kit in existing ER housings (ER-UP/G, ER-UPB, ER-UPD) for refurbishments. 2-stage fan for installation in flush-mounted housing ER GH and surface-mounted housing ER GH AP/ER GH APB. Delivery volume 30 m3/h / 60 m3/h in conjunction with the standard cover ER-A. When using the covers (ER-AK, ER-AH, ER-AB), 20 / 30 / 40 / 60 / 100 m3/h also possible. Switch-on delay 60 s. Run-on time 15 min. For single or double room ventilation with a single fan. Accessories for two-room ventilation ER-ZR. Toolless mountable discharge adapter for side and rear discharge included as standard. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The steep characteristic curve shows the high pressure capacity of the ER EC fan. Robust, energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, closed on both sides ##########_1__: ER EC, delivery volume: 20 m3/h / 30 m3/h / 40 m3/h / 60 m3/h / 100 m3/h / Stages variably adjustable depending on cover variant. ER-A: Stage 1 = 30 m3/h, stage 2 = 60 m3/h. ER-AK/ER-AB: Stage 1 and stage 2 = 20/30/40/60/100 m3/h adjustable. ER-AH: Stage 1 = 20/30/40 m3/h, stage 2 = 60/100 m3/h adjustable. Speed: 500 1/min / 800 1/min / 1050 1/min / 1250 1/min / 1800 1/min / combined with ER GH, ER GH AP/APB, Air direction: Ventilation, Speed controllable: no, Reversible: no, Voltage type: AC, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 2 W / 2.5 W / 3 W / 5 W / 17 W / combined with ER GH, 2.4 W / 2.9 W / 3.6 W / 6.2 W / 17 W combined with ER GH AP/APB, Protection rating: IP X5, Mains cable: 4 / 1.5 mm2, Installation location: wall / ceiling, Installation type: flush-mounted, System type: decentralised, Housing material: polypropylene (PP), Colour: black, Weight: 0.64 kg, Weight with packaging: 0.906 kg, Filter class: ISO Coarse 30 % (G2), Discharge direction: side / rear, Width: 213 mm, Height: 233 mm, Depth: 115 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 152 mm, Fluid temperature at IMax: 40 °C, sound pressure level: 15 dB(A) / 16 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH, 27 dB(A) / 31 dB(A) / 35 dB(A) / 41 dB(A) / 51 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

ER 60 VZC - Brief InformationFan unit with cover and filter for installation in flush-mounted housings, air volume 62 m³/h, with adjustable delay timerER 60 VZC - Product DescriptionVersion with Adjustable Delay TimerSwitch-on delay adjustable from 0 to approx. 150 seconds.Run-on time adjustable from approx. 1.5 to approx. 24 minutes.Not speed controllable.FeaturesFan with cover and ISO Coarse 30% (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Tool-free filter replacement.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust, energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Airflow characteristic curve and leakage rate tested by TÜV Bayern e.V. Leakage airflow volume < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER 60 VZCVersionAdjustable delay timerAir volume62 m³/hSpeed1,250 rpmAirflow directionExhaust airSpeed controllable−SEC average-3.43 kWh/(m²*a)Voltage typeAlternating currentRated voltage230 VMains frequency50 HzPower consumption21 WIMax0.16 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.52 kgWeight with packaging1.8 kgFilter classISO Coarse 30% (G2)Discharge directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmMedium temperature at IMax40 °CRun-on time1.5 min - 24 minSwitch-on delay0 s - 150 sSound pressure level36 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Flush-mounted housing ER-UPB/U for ER, fire protection, two-room connection at the bottomFeatures:Quality made in Germany, with maintenance-free fire protection device against fire transmission for safety in the bathroomFlush-mounted housing with two-room connection and fire protection – for easy installation on the ceiling or wallSimple one-person installation with standard tools. Single-room and two-room ventilation possible. Exhaust direction upwards, left and right, as well as ceiling installation. With plaster protection cover. With maintenance-free fire protection shut-off device. Fire protection device for accommodating a fan ER 60 / ER 100. Easily removable non-return flap for simple and quick cleaning. An integrated two-room connection set is available for two-room connections. Two-room connection at the bottom.Attractive design with elegant front panel made of impact-resistant plastic – neutral black, compatible with any bathroom furnishing style, housing made of impact-resistant plasticSuitable for continuous operation. Fire protection is provided.Description:Single-room ventilation: Fire protection housing for accommodating a fan ER 60, ER 100. Installation in apartment kitchens, bathrooms and WCs. With maintenance-free fire protection shut-off device against fire transmission K90-18017. Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device. Metal shut-off flap also serves as a cold smoke flap. Easily removable non-return flap, allowing simple and quick cleaning. Installation possible within the shaft in wall and ceiling. Approved for wall installation with exhaust direction upwards, right or left, as well as ceiling installation. Low installation depth of the flush-mounted housing and cover. With plaster protection cover. Practical snap fastener and electrical plug connection for quick installation of the fan in the housing. Plastic parts normally flammable according to class B 2. General building authority approval, approval no.: Z-51.1-46. Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Article: ER - UPB/U, version: metal exhaust nozzle on the side with metal shut-off flap with automatic release device, with fire protection housing, two-room connection at the bottom, air direction: exhaust, installation location: wall / ceiling, installation type: flush-mounted, material: plastic, colour: black, weight: 2.52 kg, weight with packaging: 3.005 kg, fire protection: yes, shut-off device: integrated, exhaust direction: sideways, connection diameter: 75 mm / 80 mm, width: 249 mm, height: 249 mm, depth: 120 mm, width with packaging: 415 mm, height with packaging: 280 mm, depth with packaging: 130 mm, approval number: Z-51.1-46

Flush-mounted housing ER-UPB/L for ER, fire protection, second left-hand sideFeatures:Quality in Germany, With maintenance-free fire protection device against fire transmission for safety in the bathroomFlush-mounted housing with second room connection and fire protection - for easy installation on the ceiling or wallUncomplicated one-man installation with standard tools. One-room and two-room ventilation possible. Discharge direction upwards, left and right as well as ceiling installation. With plaster protection cover. With maintenance-free fire protection shut-off device. Fire protection device for accommodating an ER 60 / ER 100 fan. Easily removable non-return damper for quick and easy _Reinigung.Fan integrated second room connection set is available for second room connections. Second room connection on the left.Attractive design with elegant front panel made of impact-resistant plastic - Neutral black colour, compatible with any bathroom furnishing style, housing made of impact-resistant plasticSuitable for continuous operation. Fire protection is available.Description:Single-room ventilation: Fire protection housing to accommodate an ER 60, ER 100 fan. Installation in domestic kitchens, bathrooms and WCs. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Metal exhaust spigot DN 75/80 with metal shut-off damper and automatic release device. Metal shut-off damper also serves as a cold smoke damper. Easily removable non-return damper for quick and easy cleaning. Can be installed inside the shaft in walls and ceilings. Approved for wall installation with discharge direction upwards, right or left, as well as ceiling installation. Low installation depth of the concealed housing and cover. With plaster protection cover. Practical snap-on fastening and electrical plug connection for quick installation of the fan in the housing. Plastic parts normally flammable according to class B 2. General building authority approval, approval no.: Z-51.1-46. Approval certificates on request or on our homepage _www.maico-ventilatoren.com.Article: ER - UPB/L, Version: Metal outlet connection at side with metal shut-off damper with automatic release device, with fire protection housing, second room connection on left, Air direction: Ventilation, Installation location: Wall / ceiling, Installation type: Flush-mounted, Material: Plastic, Colour: Black, Weight: 2.535 kg, Weight with packaging: 3.005 kg, Fire protection: yes, Shut-off device: integrated, Air outlet direction: sideways, Connection diameter: 75 mm / 80 mm, Width: 249 mm, Height: 249 mm, Depth: 120 mm, Width with packaging: 350 mm, Height with packaging: 350 mm, Depth with packaging: 125 mm, Approval number: Z-51.1-46

Flush-mounted housing ER-UPB/R for ER, fire protection, second right-hand sideFeatures:Quality in Germany, With maintenance-free fire protection device against fire transmission for safety in the bathroom Flush-mounted housing with second room connection and fire protection - for easy installation on the ceiling or wallUncomplicated one-man installation with standard tools. One-room and two-room ventilation possible. Discharge direction upwards, left and right as well as ceiling installation. With plaster protection cover. With maintenance-free fire protection shut-off device. Fire protection device for accommodating an ER 60 / ER 100 fan. Easily removable non-return damper for quick and easy _Reinigung.Fan integrated second room connection set is available for second room connections. Second room connection on the right.Attractive design with elegant front panel made of impact-resistant plastic - Neutral black colour, compatible with any bathroom furnishing style, housing made of impact-resistant plasticSuitable for continuous operation. Fire protection is available.Description:Single-room ventilation: Fire protection housing to accommodate an ER 60, ER 100 fan. Installation in domestic kitchens, bathrooms and WCs. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Metal exhaust spigot DN 75/80 with metal shut-off damper and automatic release device. Metal shut-off damper also serves as a cold smoke damper. Easily removable non-return damper for quick and easy cleaning. Can be installed inside the shaft in walls and ceilings. Approved for wall installation with discharge direction upwards, right or left, as well as ceiling installation. Low installation depth of the concealed housing and cover. With plaster protection cover. Practical snap-on fastening and electrical plug connection for quick installation of the fan in the housing. Plastic parts normally flammable according to class B 2. General building authority approval, approval no.: Z-51.1-46. Approval certificates on request or on our homepage _www.maico-ventilatoren.com.Article: ER - UPB/R, Version: Metal outlet connection at the side with metal shut-off damper with automatic release device, with fire protection housing, second room connection on the right, Air direction: Ventilation, Installation location: Wall / ceiling, Installation type: Flush-mounted, Material: Plastic, Colour: Black, Weight: 2.67 kg, Weight with packaging: 3.14 kg, Fire protection: yes, Shut-off device: integrated, Air outlet direction: sideways, Connection diameter: 75 mm / 80 mm, Width: 249 mm, Height: 249 mm, Depth: 120 mm, Width with packaging: 350 mm, Height with packaging: 350 mm, Depth with packaging: 125 mm, Approval number: Z-51.1-46

Fan insert ER 100 VZ 101 m3/h, with delay timerFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Not speed controllable. With switch-on delay and run-on time. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with delay timer: Switch-on delay approx. 50 sec. Run-on time approx. 6 min. Not speed-controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 100 VZ, Version: Delay timer, Delivery volume: 101 m3/h, Speed: 1900 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.5 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 29.5 W, IMax: 0.14 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: flush-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 1.465 kg, Weight with packaging: 1.75 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, run-on time: 6 min, switch-on delay: 50 s, sound pressure level: 45 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

Fan insert ER 60 VZ 15 62 m3/h, delay time 15 minFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Run-on time and switch-on delay. Not speed controllableAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with delay timer with 15 minute overrun: Switch-on delay approx. 50 sec. Run-on time approx. 15 min. Not speed-controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 60 VZ 15, Version: Delay timer 15 minutes run-on time, Delivery volume: 62 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.43 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.16 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.515 kg, Weight with packaging: 1.8 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: Lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, run-on time: 15 min, switch-on delay: 50 s, sound pressure level: 36 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

Fan insert ER 100 VZ 15 101 m3/h, with delay 15 minFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Not speed controllable. With switch-on delay and 15-minute run-on time. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with delay timer with 15 minute overrun: Switch-on delay approx. 50 sec. Run-on time approx. 15 min. Not speed-controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 100 VZ 15, Version: Delay timer 15 minutes run-on time, Delivery volume: 101 m3/h, Speed: 1900 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.5 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 29.5 W, IMax: 0.14 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.465 kg, Weight with packaging: 1.75 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: Lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, run-on time: 15 min, switch-on delay: 50 s, sound pressure level: 45 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

ER 60 GVZ - Brief InformationFan unit with cover and filter for installation in flush-mounted housing, air volume 62 m³/h, with base load control and delay timer switchER 60 GVZ - Product DescriptionVersion with Base Load Control and Delay Timer SwitchThe device runs continuously at 35 m³/h.Switching the full load stage on/off via light switch or separate switch is possible.Switching to full load with an activation delay of approx. 50 seconds.Run-on time of full load approx. 6 minutes.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).Not speed controllable.FeaturesFan with cover and ISO Coarse 30 % (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Circuit diagramsInstallation instructions: pdf | online ArticleER 60 GVZVersionBase load and delay timer controlAir volume35 m³/h / 62 m³/hSpeed850 rpm / 1,250 rpmAirflow directionExhaust airSpeed controllable−SEC average-3.43 kWh/(m²*a)Type of voltageAlternating currentRated voltage230 VMains frequency50 HzPower consumption10 W / 21 WIMax0.12 A / 0.16 AProtection classIP X5Power supply cable5 x 1.5 mm²Installation locationWall / CeilingType of installationFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.52 kgWeight with packaging1.8 kgFilter classISO Coarse 30 % (G2)Blow-out directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level25 dB(A) / 36 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Centro-E exhaust air element, electric, for central ventilationFeatures:Made in Germany quality, super quiet, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Fixed exhaust air telemet. Can be installed in all DIN VDE 0100-701 elements. Can also be installed in water jets. Electronic actuator for basic and on-demand ventilation. With G2 filter for installation in flush-mounted housing. With fire protection. Easy filter change without tools. No cold shutters or silencers required. Rotatable cover up to +/- 5° possible if the housing is installed at an angle. Easy-to-install snap-on fastening of the exhaust air element in the housing.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Centro-E exhaust air element - electric version: Exhaust air element with electrothermal actuator. For basic and on-demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-E exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. Protection class II. Exhaust air element with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. Can be used with Centro central ventilation system. Fire protection identical to MAICO ER individual room ventilation. No additional cold smoke barriers required. No additional silencers required. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the exhaust air element in the housing using the snap-on fastening. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-E, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.845 kg, Weight with packaging: 1.135 kg, Filter class: ISO Coarse > 30 % (G2), Width: 251 mm, Height: 251 mm, Depth: 138 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, sound pressure level: 26 dB(A) / 33 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

ER-A - Brief InformationCover for ER EC fan unit, standard versionER-A - Product DescriptionER-A - Standard VersionStandard cover for ER EC with filter change indicator (Timestrip).Base load 30 m³/h / full load 60 m³/h.On/Off of the full load stage via light switch or separate switch.Switching to full load stage (60 m³/h) with an activation delay of approx. 60 seconds.Run-on time of full load approx. 15 minutes.Special FeaturesFlow-optimised, aesthetically pleasing design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection class IP X5 for safety in the bathroom.Traffic white colour similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Not speed controllable.Wiring variant: With an additional switch, the base load can be switched on or off (see wiring diagrams on the internet).*Factory settingInstallation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER-AVersionStandardAir volume30 m³/h / 60 m³/h / (Stage 1/Stage 2)Air directionExhaust airProtection classIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourTraffic white, similar to RAL 9016Weight0.47 kgWeight with packaging0.62 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging310 mmHeight with packaging300 mmDepth with packaging40 mmConveyed medium temperature at IMax40 °CSwitch-on delay60 s / Switching to full load stage (60 m³/h)Sound pressure level15 dB(A) / 35 dB(A) / combined with ER GH; 31 dB(A) / 41 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799843610Article number0084.0361

Fan insert ER 100 G 101 m3/h, with base load switchingFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Speed cannot be controlled. Switching to full load possible. The base load can be switched on or off with an additional switch. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with base load switching: The appliance runs in continuous operation at 35 m3/h. The full load level can be switched on/off using a light switch or separate switch. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Not speed-controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 100 G, Version: Base load switching, Delivery volume: 35 m3/h / 101 m3/h, Speed: 850 1/min / 1900 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.66 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 9 W / 29 W, IMax: 0.09 A / 0.14 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.485 kg, Weight with packaging: 1.77 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: Lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, sound pressure level: 26 dB(A) / 45 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

ER 100 GVZ - Brief InformationFan unit with cover and filter for installation in flush-mounted housings, air volume 101 m³/h, with base load control and delay timer switchER 100 GVZ - Product DescriptionVersion with Base Load Control and Delay Timer SwitchThe device runs continuously at 35 m³/h.Switching on/off the full load stage via light switch or separate switch possible.Switching to full load with an activation delay of approx. 50 seconds.Run-on time of full load approx. 6 minutes.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).Not speed controllable.FeaturesFan with cover and ISO Coarse 30% (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Circuit diagramsInstallation instructions: pdf | online ArticleER 100 GVZVersionBase load and delay timer controlAir volume35 m³/h / 101 m³/hSpeed850 rpm / 1,900 rpmAir directionExhaust airSpeed controllable−SEC average-6.5 kWh/(m²*a)Voltage typeAlternating currentRated voltage230 VMains frequency50 HzPower consumption9 W / 29.5 WIMax0.09 A / 0.14 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.49 kgWeight with packaging1.77 kgFilter classISO Coarse 30% (G2)Blow-out directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level26 dB(A) / 45 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Fan insert ER 60 H 62 m3/h, humidity control, base loadFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity control. Additional switch allows the fan to be operated independently of the humidity level. Uncomplicated one-man installation with standard tools - low-maintenance device. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Not speed controllable. Not suitable for two-room ventilation. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with humidity control and base load switching: Barrier-free product, as automatic switching on/off via humidity control is possible. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Fan monitors the room air humidity independently and vents automatically. Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. switching on the full load using a light switch. Standard switching: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: Fan operation with or without base load operation, manual activation of full load, switching the fan on or off using a switch. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. The fan runs until the humidity in the room has fallen below the switch-off humidity. After 60 minutes at the latest, the run-on time is activated and the fan is then switched off. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 60 H, Version: Humidity control, Delivery volume: 35 m3/h / 62 m3/h, Speed: 850 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -20.12 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 21 W, IMax: 0.12 A / 0.16 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.52 kg, Weight with packaging: 1.8 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: Lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 155 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min / Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 26 dB(A) / 36 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Nominal width: 75 mm / 80 mm

ER-AP 60 - Brief InformationSurface-mounted fan for ventilation, air flow rate 61 m³/hER-AP 60 - Product DescriptionStandard VersionER 100: Speed controllable.ER 60: Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilating residential kitchens, bathrooms or WCs.Plastic outlet nozzle DN 75/80 with automatic plastic non-return flap.Plastic non-return flap also serves as a cold smoke flap.Rotatable housing, allowing connection of the outlet nozzle to the main duct either top left or top right.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Airflow characteristic curve and leakage rate tested by TÜV Bayern e.V. Leakage airflow volume < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-42.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Wiring diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-AP 60VersionStandard versionAir flow rate61 m³/hSpeed1,250 rpmAir directionVentilationSpeed controllable−SEC average-3.87 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption21 WIMax0.17 AProtection classIP X5Power supply cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.9 kgWeight with packaging2.48 kgFilter classISO Coarse 30 % (G2)Fire protectionNoConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging280 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CSound pressure level40 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2Approval numberZ-51.1-42Packaging unit1 pieceRangeBGTIN (EAN)4012799841500Article number0084.0150

Fan insert ER 60 G 62 m3/h, with base load switchingFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Cover and G2 filter for installation in flush-mounted housing. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Speed cannot be controlled. The device runs in continuous operation. For single-room or two-room ventilation with single fan.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with base load switching: The appliance runs in continuous operation at 35 m3/h. The full load level can be switched on/off using a light switch or separate switch. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Not speed-controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 60 G, Version: Base load switching, Delivery volume: 35 m3/h / 62 m3/h, Speed: 850 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.43 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 21 W, IMax: 0.12 A / 0.16 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.52 kg, Weight with packaging: 1.8 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: Lateral, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, depth with packaging: 155 mm, fluid temperature at IMax: 40 °C, sound pressure level: 26 dB(A) / 36 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

ER-AP 60 VZ - Brief InformationSurface-mounted fan for ventilation, air flow rate 61 m³/h, with delay timer switchER-AP 60 VZ - Product DescriptionVersion with Delay Timer SwitchSwitch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilating residential kitchens, bathrooms or WCs.Plastic outlet nozzle DN 75/80 with automatic plastic non-return flap.Plastic non-return flap also serves as a cold smoke flap.Rotatable housing, allowing connection of the outlet nozzle to the main duct either top left or top right.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER units comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Airflow characteristic curve and leakage rate tested by TÜV Bayern e.V. Leakage airflow volume < 0.01 m³/h.Shaft pressure difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-42.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Wiring diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-AP 60 VZVersionDelay timer switchAir flow rate61 m³/hSpeed1,250 rpmAir directionExhaust ventilationSpeed controllable−SEC average-3.62 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption21 WIMax0.17 AProtection classIP X5Mains cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.92 kgWeight with packaging2.48 kgFilter classISO Coarse 30 % (G2)Fire protectionNoConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging280 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level40 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2Approval numberZ-51.1-42Packaging unit1 pieceRangeBGTIN (EAN)4012799841517Article number0084.0151

ER 100 F - Brief InformationFan unit with cover and filter for installation in flush-mounted housings, air volume 101 m³/h, with light controlER 100 F - Product DescriptionVersion with Light ControlAccessible product, as automatic switching on/off via light control is possible.The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on.Switch-on brightness (on the device) min. 30 Lux.Switch-off brightness (on the device) max. 0.3 Lux.No need to install a switch.Switch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Circuit variant: With an additional switch, the fan can be switched off independently of the room lighting (see circuit diagrams on the internet).Not speed controllable.FeaturesFan with cover and ISO Coarse 30 % (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Circuit diagramsInstallation instructions: pdf | online ArticleER 100 FVersionLight controlAir volume101 m³/hSpeed1,900 1/minAir directionExhaust airSpeed controllable−SEC average-21.38 kWh/(m²*a)Type of voltageAlternating currentRated voltage230 VMains frequency50 HzPower consumption29.5 WIMax0.14 AProtection classIP X5Mains cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.49 kgWeight with packaging1.77 kgFilter classISO Coarse 30 % (G2)Exhaust directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level45 dB(A) / Specification according to DIN 18017-3 at an equivalent absorption area AL = 10 m2

ER-AP 100 - Brief InformationSurface-mounted fan for ventilation, air volume 100 m³/h, standard versionER-AP 100 - Product DescriptionStandard VersionER 100: Speed controllable.ER 60: Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilating residential kitchens, bathrooms or WCs.Plastic outlet nozzle DN 75/80 with automatic plastic non-return flap.Plastic non-return flap also serves as a cold smoke flap.Rotatable housing, allowing connection of the outlet nozzle to the main duct either top left or top right.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even when exposed to jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-42.Approval certificates available on request or on our website www.maico-ventilatoren.com.Installation / Operation / Maintenance ArticleER-AP 100VersionStandard versionAir volume100 m³/hSpeed1,850 rpmAir directionVentilationSpeed controllable✔SEC average-6.54 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption28.5 WIMax0.15 AProtection classIP X5Power supply cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.89 kgWeight with packaging2.45 kgFilter classISO Coarse 30 % (G2)Fire protectionNoConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging255 mmDepth with packaging235 mmMedium temperature at IMax40 °CSound pressure level49 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2Approval numberZ-51.1-42Packaging unit1 pieceRangeBGTIN (EAN)4012799841708Article number0084.0170

Exhaust air element, surface-mounted Centro-M-APB manual, for central ventilationFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroomFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Fixed exhaust air telemet. Fixed exhaust air element. Can be installed in all DIN VDE 0100-701 elements. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold stops or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Exhaust air element Centro-M-APB - Manual version: For jointly variable volume flow. Fixed exhaust air element. MAICO Centro-M-APB extract air elements have no electrical connection and can be installed in all areas in accordance with DIN VDE 0100-701. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-M-APB, Version: manual, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Type of protection: IP X5, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.375 kg, Weight with packaging: 1.935 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2