Zentralentlüftungssysteme

Version with speed setpoint adjuster: Speed setpoint control, Setting of 2 setpoints possible, Day/night changeover, External ON/OFF switching possible, Status repair switch Potential-free contact (can be loaded up to 230 V/2A), Motor fault signal Potential-free contact (can be loaded up to 230 V/2A), Attractive housing made of galvanised sheet steel, Galvanised protective grille on the outlet side, Protection against accidental contact in accordance with EN ISO 13857, Cover can be easily removed for cleaning, Automatic fault signal, Integrated repair switch, Protection class IP55, Sturdy transport lugs enable transport by crane, Complies with DIN EN 60204-1 and DIN EN 60335-1, Control: Intelligent control options via Modbus, 0-10 V, PWM or pressure control, Output of fault messages, Pressure sensor built into the fan housing of the PG variants ready for operation. Motor and impeller: EC motor, 230 V, 50 Hz, or 400 V 50 Hz, overload protection as standard, no measures required for motor protection, Electrical connection: Common mains connection (230 V, 50 Hz or 400 V, 50 Hz) for fan and impeller. 400 V, 50 Hz) for fan and control, Mains connections each 3 x 1.5 mm2 (or 7x 1.5 mm 3) of type NYM-J, Control cable from 0.5 mm2, Connection terminals for speed control via 0-10 V, PWM or potentiometer, Connection terminal for status speed output (MDR 22 EC, MDR 25 EC, MDR 31 EC), Connection terminal for Modbus output (MDR 22 EC, MDR 25 EC, MDR 31 EC), Connection terminal for fault messagesArticle: MDR-VG 31 EC, delivery volume: 3640 m3/h, nominal delivery volume: 2095 m3/h, pressure pfs, nominal: 432 Pa, nominal speed n: 2100 1/min, impeller type: radial, speed controllable: no, reversibility: no, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, rated power: 485 W, INenn: 2.13 A, IMax: 2.3 A, Protection rating: IP 55, Thermal class: F, Pole-changing: no, Installation location: Roof, Installation position: Vertical, Weight: 43 kg, Weight with packaging: 45.274 kg, Swivelling: no, Nominal width: 315 mm, Width: 720 mm, Height: 547 mm, Depth: 720 mm, Width with packaging: 755 mm, Height with packaging: 575 mm, Depth with packaging: 755 mm, Fluid temperature at IMax: -25 °C to 60 °C, Temperature class: F, Total efficiency e: 51.8 %, Year of manufacture: see nameplate, Manufacturer's name / Official registration number / Manufacturer's place of business: Maico Elektroapparate-Fabrik GmbH / Registergericht Freiburg, HRB 601233, PBEP / Conveying volumeBEP / Pfs, BEP: 0.485 kW / 2095 m3/h / 432 Pa, Information on dismantling and disposal: see installation instructions, Information on installation, operation and maintenance: see installation instructions, Items used in the efficiency measurement that are not described by the measurement category: -, Sound power levelLWA5: 80 dB

Exhaust air element, surface-mounted Centro-M-APB manual, for central ventilationFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroomFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Fixed exhaust air telemet. Fixed exhaust air element. Can be installed in all DIN VDE 0100-701 elements. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold stops or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Exhaust air element Centro-M-APB - Manual version: For jointly variable volume flow. Fixed exhaust air element. MAICO Centro-M-APB extract air elements have no electrical connection and can be installed in all areas in accordance with DIN VDE 0100-701. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-M-APB, Version: manual, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Type of protection: IP X5, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.375 kg, Weight with packaging: 1.935 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Centro-H extract air element, humidity-controlledFeatures:Made in Germany quality, super quiet, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as automatic switch-on / switch-off by humidity control. Switch-on point can be set via jumper. Manual operation via switch possible. Run-on time at full load. Uncomplicated one-man installation with standard tools - low-maintenance device. Can be installed in all DIN VDE 0100-701 elements. Can also be installed in water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Rotatable cover up to +/- 5° possible if the housing is installed at an angle. Easy-to-install snap-on fastening of the exhaust air element in the housing. Pressure control required for central fan. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Centro-H exhaust air element - version with automatic humidity control: Exhaust air element with electrothermal actuator. For basic and demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-H exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. Protection class II. Barrier-free product, as it switches on/off automatically. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Valve monitors the room humidity independently and automatically switches to ventilation on demand. Manual operation possible via a switch, e.g. switching on the ventilation on demand using a light switch. Standard switching: Exhaust air element closed Operation in basic ventilation, humidity control is active when the switch-on point is exceeded - operation in demand ventilation, when the switch-off point is undershot - operation in basic ventilation. Other switching variants: manual activation of demand ventilation. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. Exhaust air element with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. Can be used with Centro central ventilation system. Fire protection identical to MAICO ER individual room ventilation. No additional cold smoke barriers required. No additional silencers required. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the exhaust air element in the housing using the snap-on fastening. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-H, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3.5 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.86 kg, Weight with packaging: 1.13 kg, Filter class: ISO Coarse > 30 % (G2), Width: 251 mm, Height: 251 mm, Depth: 138 mm, Width with packaging: 285 mm, Height with packaging: 285 mm, Depth with packaging: 155 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min - Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Nominal width: 75 mm / 80 mm

Exhaust air element, surface-mounted Centro-E-APB electric, for central ventilationFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Exhaust air telemet with electronic actuator. Can be installed in all DIN VDE 0100-701 elements, even with water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line. Electrical plug-in connection for quick installation. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Exhaust air element Centro-E-APB - Electric version: Exhaust air element with electrothermal actuator. For basic and on-demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-E-APB exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even with water jets. Protection class II. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-E-APB, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Centralised, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 1.45 kg, Weight with packaging: 2.01 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 26 dB(A) / 33 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Exhaust air element, surface-mounted Centro-H-APB humidity-controlledFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against humidity, unpleasant odours and mouldBarrier-free product, as on/off via automatic humidity sensor. Uncomplicated one-man installation with standard tools - low-maintenance device. Adjustable relative humidity. Manual operation possible. Full load can be switched on manually with run-on time. Can be installed in all DIN VDE 0100-701 elements, even with water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line. Electrical plug-in connection for quick installation. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Centro-H-APB extract air element - version with automatic humidity control: extract air element with electrothermal actuator. For basic and demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-H-APB exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even with water jets. Protection class II. Barrier-free product, as it switches on/off automatically. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Valve monitors the room humidity independently and automatically switches to ventilation on demand. Manual operation possible via a switch, e.g. switching on the ventilation on demand using a light switch. Standard switching: Exhaust air element closed Operation in basic ventilation, humidity control is active when the switch-on point is exceeded - operation in demand ventilation, when the switch-off point is undershot - operation in basic ventilation. Other switching variants: manual activation of demand ventilation. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-H-APB, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3.5 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.492 kg, Weight with packaging: 2.034 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 340 mm, Depth with packaging: 255 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min - run-on time available when using an optional switch (z.B. Light switch) available, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Nominal width: 75 mm / 80 mm