SYSTEMAIR MARKEN SHOP

Thyristor speed controllers enable manual speed control of fans with 230V/50Hz single-phase motors. When installed with the enclosed surface-mounted housing, the protection class of the control unit is IP 54. When flush-mounted without the surface-mounted housing, the protection class is IP 44. Several motors can be connected in parallel as long as the total current does not exceed the rated current of the controller. When selecting a suitable control unit, the starting currents of the fans must be taken into account. Fans that are operated with this control unit must have built-in overheating protection and be suitable for operation with a thyristor controller.

Systemair tube fan K 100XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 52.1 WCurrent 0.227 AMax. Volume flow 285 m³/hSpeed 2418 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 45.2 dB(A)Weight 3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option C ErP ready 2016, 2018 Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 150M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 53.3 WCurrent 0.232 AMax. Volume flow 464 m³/hSpeed 2379 1/minMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 37.5 dB(A)Weight 3.3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option B Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 100M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.9 WCurrent 0.171 AMax. Volume flow 184 m³/hSpeed 2443 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 38.4 dB(A)Weight 2.3 kgInsulation class, motor B Protection class, motor 44 IP Energy class, basic unit F Energy class, basic unit option D ErP ready 2016, 2018 Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 200M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 102 WCurrent 0.442 AMax. Volume flow 760 m³/hSpeed 2529 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 42.7 dB(A)Weight 4.1 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 200L sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 145 WCurrent 0.631 AMax. Volume flow 965 m³/hSpeed 2555 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 47.8 dB(A)Weight 4.8 kgInsulation class F Protection class, motor 44 IPCapacitor 3.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 125 EC Voltage 230 VFrequency 50 HzPhase 1 ~Power 83 WCurrent 0.678 AMax. Volume flow 482 m³/hSpeed 3308 1/minMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °CSound pressure level at 3m (20m² Sabine) 45.9 dB(A)Weight 2.8 kgInsulation class, motor B Protection class, motor 54 IP 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 125XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 52.7 WCurrent 0.229 AMax. Volume flow 359 m³/hSpeed 2395 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 41.7 dB(A)Weight 2.9 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 150XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 100 WCurrent 0.443 AMax. Volume flow 724 m³/hSpeed 2523 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 46.4 dB(A)Weight 4.1 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 160XL Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 102 WCurrent 0.447 AMax. Volume flow 749 m³/hSpeed 2539 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 46.4 dB(A)Weight 4 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair K 315M inline fan ErP ready ErP 2016/ErP 2018 Nominal dataVoltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 231 WCurrent 1.01 AMax. Volume flow 1224 m³/hSpeed 2783 1/minCapacitor 5 µFWeight 6.6 kgTemperature dataMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound dataSound pressure level at 3m (20m² Sabine) 42.7 dB(A)Protection class / classificationInsulation class F Protection class, motor IP44 IP Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 200EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 78.6 WCurrent 0.626 AMax. Volume flow 774 m³/hSpeed 2468 r.p.mSound pressure level at 3m (20m² Sabine) 51.4 dB(A)Weight 3.3 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Pocket filter for Topvex SR devices, filter class F7 With plastic frame and 10 / 12 filter pockets. Can be used as an exhaust air filter. Two filters are required for the Topvex SR09 and SR11!

Systemair tube fan RVK-EX 315D4, ATEX Voltage 400 VFrequency 50 HzPhase 3 ~Electrical input power (P1) 84.4 WCurrent 0.2 AMax. Volume flow 1120 m³/hSpeed 1385 1/minMax. Pumped liquid temperature 40 °CMax. Max. fluid temperature with speed control 40 °CSound pressure level at 3m (20m² Sabine) 41.2 dB(A)Weight 7.1 kgInsulation class B Protection class, motor 44 IPCertificate ZELM 03AREX0198X Explosion protection II 2G c Ex e IIB T3 Tested in accordance with ATEX Directive 94-9-EG Reliable and easy to maintain Installation possible in any mounting position Type of protection Ex e" (increased safety) Motor protection via PTC thermistor (*PTC), in conjunction with a U-EK230E tripping device Voltage controllable external rotor motor with lead-out cable RVK fans are designed for installation in ducts. The housing is made of conductive plastic and the centrifugal impeller is fitted with backward curved blades. Combined with the Systemair U-EK230E motor protection relay, the speed of the RVK-EX 315D4 can be controlled via a 5-stage voltage regulator. They can be used for temperature classes T1, T2 and T3. It is also possible to convey explosive gases in zone 1 and zone 2, as well as groups IIA and IIB. The fans are certified under ZELM 03 ATEX 0198x. The motor of the RVK fans must be connected to a separate motor protection switchgear. * Positive Temperature Coefficient = PTC (thermistor)

Pocket filter for Topvex SR devices, filter class M5 With plastic frame and 10 / 12 filter pockets. Can be used as an exhaust air filter. Two filters are required for the Topvex SR09 and SR11!

Connecting cable 15m, with plug on both ends for CE and CD control.

Systemair tube fan K 160 EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 79.4 WCurrent 0.628 AMax. Volume flow 544 m³/hSpeed 3105 r.p.mSound pressure level at 3m (20m² Sabine) 46.6 dB(A)Weight 3.3 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 160M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 53 WCurrent 0.231 AMax. Volume flow 450 m³/hSpeed 2388 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 37.8 dB(A)Weight 3.3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option B Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 250L sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 145 WCurrent 0.632 AMax. Volume flow 979 m³/hSpeed 2562 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 43 dB(A)Weight 4.6 kgInsulation class F Protection class, motor 44 IPCapacitor 3.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 125M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.1 WCurrent 0.172 AMax. Volume flow 187 m³/hSpeed 2483 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 33.9 dB(A)Weight 2.3 kgInsulation class, motor B Protection class, motor 44 IPCapacitor None µF Energy class, basic unit F Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

User-friendly operating unit for SAVE domestic ventilation units with the SAVEControl control system. - Capacitive touch display 3.5" - Frame of the control unit in white- Connection of up to ten control units to one domestic ventilation unit- Up to four control units via the internal power supply- Max. cable length 50 metres- Connection with flat cable and compact plug RJ10 (4P4C)- 15 metre connection cable and Y adapter available as accessories- Wall mounting frame available as an accessory The start screen presents the most important information about operating mode, temperature, air quality and active functions. Access to the complete settings. The control functions are device-specific and can be found in the description of the domestic ventilation units.

Systemair tube fan K 100 EC Voltage 230 VFrequency 50 HzPhase 1 ~Power 82.6 WCurrent 0.69 AMax. Volume flow 321 m³/hSpeed 3479 1/minMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °CSound pressure level at 3m (20m² Sabine) 49.8 dB(A)Weight 2.9 kgInsulation class, motor B Protection class, motor 54 IP 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 250 EC Voltage 230 V Frequency 50/60 Hz Phase 1 ~ Power 115 W Current 0.874 A Max. Volume flow 979 m³/h Speed 2562 r.p.m Sound pressure level at 3m (20m² Sabine) 39.4 dB(A) Weight 4.5 kg Insulation class, motor B Protection class, motor 54 IP Max. Max. fluid temperature 55 °C Max. Max. fluid temperature with speed control 55 °C Description - 100 % controllable - Integrated speed controller - Integrated motor protection - Low noise level - Installation in any mounting position - Mounting bracket included - Reliable and maintenance-free - Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range. However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Wall mounting frame for the SAVEControl HMI operating unit. - Simple installation- Cable entries

Ceiling mounting kit for SAVE VSR 300.The kit is requiredfor mounting the SAVE VSR 300 horizontal under the ceiling .

Systemair tube fan K 315L EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 340 WCurrent 2.08 AMax. Volume flow 1732 m³/hSpeed 2719 r.p.mSound pressure level at 3m (20m² Sabine) 57.2 dB(A)Weight 7.2 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 55 °CMax. Max. fluid temperature with speed control 55 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 250M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 103 WCurrent 0.449 AMax. Volume flow 788 m³/hSpeed 2535 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 41.3 dB(A)Weight 3.9 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair plastic duct fan RVK sileo 100E2 Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.1 WCurrent 0.171 AMax. Volume flow 184 m³/hSpeed 2482 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 34.5 dB(A)Weight 1.8 kgInsulation class, motor B Protection class, motor 44 IP Speed controllable Built-in thermal contacts in accordance with EN 60335-2-80 Installation possible in any mounting position Mounting bracket included Reliable and maintenance-free Extensive range of accessories The RVK series is suitable for duct mounting. All fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. With the FK connecting collars, which we offer as accessories, the fan can be connected to the pipework system without vibration. By reducing the voltage, the fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. To protect the motor from overheating, the models have built-in thermal contacts that are automatically reset in accordance with EN 60335-2-80. The housing is made of plastic (propylene PP with 30% glass fibre content). We recommend including an overrun for installation in damp rooms.

User-friendly operating unit for SAVE domestic ventilation units with the SAVEControl control system. - Capacitive touch display 3.5" - Control unit frame in black- Connection of up to ten operating units to one domestic ventilation unit- Up to four control units via the internal power supply- Max. cable length 50 metres- Connection with flat cable and compact plug RJ10 (4P4C)- 15 metre connection cable and Y adapter available as accessories- Wall mounting frame available as an accessory The start screen presents the most important information about operating mode, temperature, air quality and active functions. Access to the complete settings. The control functions are device-specific and can be found in the description of the domestic ventilation units.

Systemair tube fan K 315M EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 166 WCurrent 1.14 AMax. Volume flow 1415 m³/hSpeed 2113 r.p.mSound pressure level at 3m (20m² Sabine) 49.7 dB(A)Weight 6 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 40 °CMax. Max. fluid temperature with speed control 40 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.