MAICO VENTILATOREN MARKEN SHOP

Small room fan ECA 100 ipro Standard, DN100Features:Made in Germany quality, super quiet, two-stage fan connection DN 100, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC,The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on and off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for overrun (4-core cable to fan required)Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Two-stage operation using standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. VDE-GS mark, exception: ECA 100 ipro RC/RCH. VDE mark: ECA 100 RC/RCH. Protection class IP X5 for safety in the bathroom. Protection class II. Suitable for continuous operation. Thermal overload protection. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation, as cover can be easily removed with tools. Wall and ceiling mounting possible. Compatible with ECA predecessor models DN 100, as the fixing holes and flush-mounted cable entry are in the same place. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA 100 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 100 ipro, Version: Standard version, Delivery volume: 78 m3/h / 92 m3/h, Speed: 2100 1/min / 2500 1/min, Speed controllable: yes, Reversible: no, SEC average: -10.69 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 6 W / 8 W, IMax: 0.06 A, Protection rating: IP X5, Mains cable: 3/5 x 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.7 kg, Weight with packaging: 0.85 kg, Flap: none, Nominal width: 100 mm, Width: 159 mm, Height: 159 mm, Depth: 130 mm, Width with packaging: 165 mm, Height with packaging: 165 mm, Depth with packaging: 145 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 27 dB(A) / 32 dB(A) / distance 3 m, Free field conditions

Body shell sleeve PP 45 RHK short sleeve, 500 mmFeatures:Quality Made in GermanyBody shell sleeves - for easy installation. Body shell sleeve available in two different sizes. The scope of delivery includes 1 x shell sleeve and 1 x installation material. 500 mm length.Attractive design - compatible with any interior style Suitable for continuous operation. Description:Necessary accessories for the PP 45 K, PP 45 O, PP 45 RC, PPB 30 K and PPB 30 O final assembly sets. Available in two different lengths: PP 45 RHK with a length of 500 mm and PP 45 RHL with a length of 800 mm. Scope of delivery: 1 x shell sleeve, 1 x Montagematerial.Artikel: PP 45 RHK, Installation location: External wall, Material: Plastic, Colour: Grey, Weight: 1.244 kg, Weight with packaging: 1.368 kg, Nominal width: 160 mm, Length: 500 mm, Width: 160 mm, Height: 160 mm, Depth: 500 mm, Width with packaging: 165 mm, Height with packaging: 165 mm, Depth with packaging: 510 mm, Required core drill hole: 182 mm

Air filter, PP 45 G3 for PushPull PP 45Features:Quality Made in GermanyReplacement air filter - for easy installation.Installation in slide-in unit on the outside, filter class G3Attractive design - compatible with any interior style Suitable for continuous operation. Description:Replacement air filter set for PushPull 45 single room ventilation unit. The ISO Coarse 30 % (G2) filters are installed on the inside and the ISO Coarse 45 % (G3) filters on the outside installiert.Artikel: PP 45 G3, Material: Synthetic, Colour: White, Weight: 0.006 kg, Weight with packaging: 0.009 kg, Filter class: ISO Coarse 45 % (G3), Width: 140 mm, Height: 140 mm, Depth: 15 mm, Width with packaging: 200 mm, Height with packaging: 180 mm, Depth with packaging: 33 mm

Air filter, PP 45 G2 for PushPull PP 45Features:Quality Made in GermanyReplacement air filter - for easy installation.Installation in the slot on the inside, filter class G2Attractive design - compatible with any furnishing style Suitable for continuous operation. Description:Replacement air filter set for PushPull 45 single room ventilation unit. The ISO Coarse 30 % (G2) filters are installed on the inside and the ISO Coarse 45 % (G3) filters on the outside installiert.Artikel: PP 45 G2, Material: Synthetic, Colour: White, Weight: 0.004 kg, Weight with packaging: 0.007 kg, Filter class: ISO Coarse 30 % (G2), Width: 140 mm, Height: 140 mm, Depth: 10 mm, Width with packaging: 200 mm, Height with packaging: 180 mm, Depth with packaging: 22 mm

Sound insulation element PP 45 for final assembly set PP 45Features:Quality Made in Germany, building material class B1Sound insulation element - for increased sound attenuationUsed to reduce sound power and increase sound attenuation. With one element up to 2 dB(A). Supplied with 1 x outer ring, 1 x inner part (serves as transport protection and must be removed before installation.Attractive design - Compatible with any interior style Suitable for continuous operation. Description:Sound insulation element as an optional accessory for final assembly set PP 45 O, PP 45 K and PP 45 RC. Used to reduce the sound power and increase the sound attenuation. Reduction in sound power of up to 2 dB(A) with one sound attenuation element. Reduction in sound power of up to 3.5 dB(A) with two sound-absorbing elements (rotated 45°). Scope of delivery: 1 x outer ring, 1 x inner part, The inner part is only used for transport protection and must be removed before installation in the demounting set werden.Artikel: PP 45 SE, Installation location: Wall, Material: Melamine resin, Colour: Grey, Weight: 0.018 kg, Weight with packaging: 0.02 kg, Fire protection: Fire protection class B1, Outer diameter: 154 mm, Width: 154 mm, Height: 154 mm, Depth: 100 mm, Width with packaging: 156 mm, Height with packaging: 156 mm, Depth with packaging: 101 mm, Total insertion loss: 1.5 dB / 2 dB, Insertion loss Note: with 2x PP45 SE (rotated 45°): 2.5-5 dB(A), sound attenuation: yes

Pipe connector MT-V160 for MAICOTherm pipes, DN160Features:Quality Made in GermanyVentilation pipe connector - for easy installation. Ventilation pipe connector for simple and secure installation with MT-R and MT-B ventilation pipes. Quick, force-fit connection.Attractive design with EPDM rubber - Neutral black, compatible with any interior style Suitable for continuous operation.Description:For connecting ventilation duct MT-R and ventilation duct bend MT-B to each other. Simple and secure installation. Quick, force-fit Verbindung.Artikel: MT-V160, Material: EPDM rubber, Weight: 0.1 kg, Weight with packaging: 0.14 kg, Nominal diameter: 160 mm, Inside diameter: 200 mm / 200 mm, Width: 280 mm, Height: 50 mm, Depth: 60 mm, Width with packaging: 280 mm, Height with packaging: 50 mm, Depth with packaging: 60 mm

Fan insert ER EC 2.1 for flush-mounted housing ER GH and surface-mounted housing ER GHFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom, installation in protection zone 1 possible For a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Two-stage motor with automatic thermal overload protection. Switch-on delay and run-on time. Can be used for flush and surface mounting. Discharge adapter for side and rear discharge included as standard. Attractive design with elegant front panel made of impact-resistant plastic - Compatible with any bathroom furnishing style Housing made of impact-resistant plasticThermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Special features: Robust, constant-volume, energy-saving and sound-optimised EC motor. Lowest power consumption. Can be used for flush-mounted and surface-mounted applications. Ventilation solution in accordance with DIN 18017-3 (single-pipe ventilation). DIBt approval applied for. Protection class IP X5, installation in protection zone 1 possible. The ER EC fan insert can be combined with the four existing covers ER-A, ER-AK, ER-AH, ER-AB and adapted to the application situation. Can be used in conjunction with the ER-RPK replacement kit in existing ER housings (ER-UP/G, ER-UPB, ER-UPD) for refurbishments. 2-stage fan for installation in flush-mounted housing ER GH and surface-mounted housing ER GH AP/ER GH APB. Delivery volume 30 m3/h / 60 m3/h in conjunction with the standard cover ER-A. When using the covers (ER-AK, ER-AH, ER-AB), 20 / 30 / 40 / 60 / 100 m3/h also possible. Switch-on delay 60 s. Run-on time 15 min. For single or double room ventilation with a single fan. Accessories for two-room ventilation ER-ZR. Toolless mountable discharge adapter for side and rear discharge included as standard. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The steep characteristic curve shows the high pressure capacity of the ER EC fan. Robust, energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, closed on both sides ##########_1__: ER EC, delivery volume: 20 m3/h / 30 m3/h / 40 m3/h / 60 m3/h / 100 m3/h / Stages variably adjustable depending on cover variant. ER-A: Stage 1 = 30 m3/h, stage 2 = 60 m3/h. ER-AK/ER-AB: Stage 1 and stage 2 = 20/30/40/60/100 m3/h adjustable. ER-AH: Stage 1 = 20/30/40 m3/h, stage 2 = 60/100 m3/h adjustable. Speed: 500 1/min / 800 1/min / 1050 1/min / 1250 1/min / 1800 1/min / combined with ER GH, ER GH AP/APB, Air direction: Ventilation, Speed controllable: no, Reversible: no, Voltage type: AC, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 2 W / 2.5 W / 3 W / 5 W / 17 W / combined with ER GH, 2.4 W / 2.9 W / 3.6 W / 6.2 W / 17 W combined with ER GH AP/APB, Protection rating: IP X5, Mains cable: 4 / 1.5 mm2, Installation location: wall / ceiling, Installation type: flush-mounted, System type: decentralised, Housing material: polypropylene (PP), Colour: black, Weight: 0.64 kg, Weight with packaging: 0.906 kg, Filter class: ISO Coarse 30 % (G2), Discharge direction: side / rear, Width: 213 mm, Height: 233 mm, Depth: 115 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 152 mm, Fluid temperature at IMax: 40 °C, sound pressure level: 15 dB(A) / 16 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH, 27 dB(A) / 31 dB(A) / 35 dB(A) / 41 dB(A) / 51 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

Fan insert ER EC RF 17 for flush-mounted housing UP-/UPD-/UPB 17Features:Quality in Germany, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Two-stage motor with automatic thermal overload protection. Switch-on delay and run-on time. Adaper board with 5 terminals for quick mounting of the fan on the housing. Attractive design with elegant front panel made of impact-resistant plastic - Compatible with any bathroom furnishing style Housing made of impact-resistant plasticThermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Special features: Fan insert kit for use in ER 17 concealed housings. Replacement of old ER 17 fan inserts with energy-saving ER EC RF17. Reduced power consumption by up to 90 % compared to ER 17. Improved sound power compared to ER 17. Contemporary design thanks to new ER-A/ER-AK/ER-AH/ER-AB covers. Extended control options through combination with ER-A/ER-AK/ER-AH/ER-AB covers. No time-consuming replacement work necessary. 2-speed fan for installation in flush-mounted housing UP-/UPD-/UPB 17. 30 m3/h / 60 m3/h flow rate in combination with the standard ER-A cover. When using the covers (ER-AK, ER-AH, ER-AB), 20 / 30 / 40 / 60 / 100 m3/h also possible. Switch-on delay 60 s. Run-on time 15 min. For single room ventilation with a single fan. Adapter board with 5 terminals for quick installation of the fan in the housing. Enclosed mounting accessories for installing the fan insert in the ER 17 housing. ER EC RF17 complies with protection class IP X5 and can therefore be installed in zone 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The steep characteristic curve shows the high pressure capacity of the ER EC RF17 fan. Robust, energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, closed on both sides ##########_0__: ER EC RF17, delivery volume: 20 m3/h / 30 m3/h / 40 m3/h / 60 m3/h / 100 m3/h / Stages can be variably adjusted depending on the cover variant. ER-A: Stage 1 = 30 m3/h, stage 2 = 60 m3/h. ER-AK/ER-AB: Level 1 and level 2 = 20/30/40/60/100 m3/h adjustable. ER-AH: Stage 1 = 20/30/40 m3/h, stage 2 = 60/100 m3/h adjustable. Speed: 500 1/min / 800 1/min / 1050 1/min / 1250 1/min / 1800 1/min, Air direction: Ventilation, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 2 W / 2.5 W / 3 W / 5 W / 17 W, Protection rating: IP X5, Mains cable: 4 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Housing material: Polypropylene (PP), Colour: black, Weight: 0.7588 kg, Weight with packaging: 1.053 kg, Filter class: ISO Coarse 30 % (G2), Discharge direction: lateral, Width: 225 mm, Height: 87 mm, Depth: 215 mm, Width with packaging: 280 mm, Height with packaging: 155 mm, Depth with packaging: 280 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 26 dB(A) / 36 dB(A), Nominal width: 75 mm / 80 mm

Internal lock, electr. AE 10/1 DN100Features:Made in Germany quality, super quiet, protection class IP X4 for safety in the homeElectric internal closure flap - for simple ventilation and extractionRegulation of basic ventilation through adjustable opening angle. Heat energy-saving as required. Control with switch, timers and overrun relay. Attractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Internal flap for ventilation. Regulation of basic ventilation through adjustable opening angle. Heat energy-saving thanks to opening as required. Activation with commercially available off-switches, timers and overrun relays. Protection class IPX4. AE 10/1 can be combined with the window installation kit FE 100/1.Artikel: AE 10/1, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 5 W, INenn: 25 mA, Protection rating: IP X4, Mains cable: 3 / 1.5 mm2, Installation: indoor, Installation location: wall / ceiling, Installation location: cellar, Installation type: surface-mounted, Installation position: vertical / horizontal, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.31 kg, Weight with packaging: 0.418 kg, Flap type: electric, Nominal width: 100 mm, Suitable for nominal width: 100 mm, Width: 159 mm, Height: 159 mm, Depth: 85 mm, Width with packaging: 170 mm, Height with packaging: 170 mm, Depth with packaging: 110 mm, Ambient temperature: 40 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no, With installation frame: no

RLS 45 K room air control unit for up to 6 PushPull 45 K devicesFeatures:Quality Made in GermanyRoom air control - for simple control. Has 5 different ventilation levels as well as 3 operating programmes and a sensor-guided auto mode. Can be extended with a humidity sensor or an external sensor. Up to six devices can be connected. Safety shutdown and configuration with PC/laptop. Programmes: Continuous ventilation with heat recovery, cross ventilation without heat recovery and sensor-guided auto mode. Time limit switch-off and intensive ventilationAttractive design - Neutral white similar to RAL 9016, compatible with any interior style Suitable for continuous operation. Description:Special features: 5 ventilation levels PP45-15/20/30/36/42m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto mode can be selected with the control unit. Continuous ventilation mode with heat recovery: PushPull operation. The devices run alternately and change direction every 60 seconds. Cross ventilation operating mode: One device is permanently in supply air mode and the corresponding device is in extract air mode (z.B. for summer night cooling). In automatic mode, the delivery volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 K room air control system can be expanded with the internal humidity sensor or with the external sensors (humidity, CO2, VOC). The delivery volume is adjusted and the devices achieve energy efficiency class A+. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of appliances. Time-limited intensive ventilation (shock ventilation) or time-limited switch-off (sleep function) can also be selected at the touch of a button. The RLS 45 K room air control unit enables communication between exhaust air units (z.B. ECA/ER) and PushPull units. D.h. When an extract air fan starts up, the PushPull units switch to supply air mode to compensate for the resulting negative pressure. Supply air operation is possible with a run-on time of 0.6 or 15 minutes. The number of connected devices is also taken into account. The control unit has a separate 230 V input whose function can be defined in the software. The following functions are available for selection: Safety shutdown, sleep function, shock ventilation, supply air function for the exhaust air units with 0s, 6min or 15min overrun. ModBus connection is possible. In addition, the RLS 45 K room air control unit offers the option of conveniently configuring the device with a PC/laptop (Windows) using the commissioning software. Simple, time-saving digital commissioning and creation of digital commissioning protocols and recovery files. In combination with the EnOcean extension module PP 45 EO, the RLS 45 K room air control unit offers the unique possibility of connecting the wired PP 45 K and PP 45 O and the PP 45 RC radio devices with each other. With this control combination, it is therefore possible to z.B. wired devices can be installed on the ground floor and radio devices on the first floor. The entire system is controlled at the touch of a button. The control system can be expanded with additional PP45 LT control units or power packs. The room air control unit is required as an accessory for the PP 45 K, PP 45 O or PPB 30 K, PPB 30 O final assembly sets. For the PP 45 RC range of appliances, the RLS45 K wired control unit can be used as an option instead of the DS 45 RC wireless switch. The combination of RLS 45 K with the EnOcean extension module PP 45 EO is then required. Up to 6 fans can be controlled simultaneously via an RLS 45 K room air control unit, z.B. 6 x PP 45 devices or 4 x PP 45 devices + 1 x PPB 30 or up to 3 x PPB 30 deviceste.Artikel: RLS 45 K, Rated voltage: 230 V, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Flush-mounted, Material: Plastic, Colour: pure white, similar to RAL 9010, Weight: 0.112 kg, Weight with packaging: 0.341 kg, Width: 80 mm, Height: 80 mm, Depth: 49 mm, Width with packaging: 81 mm, Height with packaging: 81 mm, Depth with packaging: 50 mm

Wall sleeve WH 150 plastic, extendable, DN150Features:Quality Made in GermanyWall sleeve - for easy installationFor wall and ceiling mounting. Variable length.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Wall sleeve for wall and ceiling mounting. Length variabel.Artikel: WH 150, Installation location: Wall / ceiling, Material: Plastic, Weight: 1.35 kg, Weight with packaging: 1.4 kg, Suitable for nominal diameter: 150 mm, Width: 168 mm, Height: 168 mm, Depth: 500 mm, Width with packaging: 168 mm, Height with packaging: 168 mm, Depth with packaging: 500 mm, Required core drilling: min. 169 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Air filter, PPB 30 G3 2 x (G3), for PPB 30 K and PPB 30 OFeatures:Quality Made in GermanyReplacement air filter - for easy installation.For PushPull Balanced PPB 30 single-room ventilation unit, installation on the inside.Attractive design - compatible with any interior style Suitable for continuous operation. Description:Replacement air filter set for PushPull Balanced PPB 30 single-room ventilation unit, Installation innenseitig.Artikel: PPB 30 G3, Material: Synthetic, Colour: White, Weight: 0.004 kg, Weight with packaging: 0.008 kg, Filter type: Coarse filter, Filter class: ISO Coarse 45 % (G3), Width: 210 mm, Height: 30 mm, Depth: 50 mm, Width with packaging: 211 mm, Height with packaging: 35 mm, Depth with packaging: 55 mm

Push-in connector SVR 160 with lip seal for pipe, DN160Features:Quality Made in GermanyPush-in connector for pipes - for easy installationPlug-in connector for spiral ducts, incl. lip sealsAttractive design - compatible with any interior styleSuitable for continuous operation.Description:Plug-in connector for spiral ducts, incl. lip seals. E.G. For connecting the WR 310 / WR 410, WS 320 and WS 470 central ventilation units to Wickelfalzrohre.Artikel: SVR 160, Installation type: Flush-mounted, Material: Sheet steel, Weight: 0.208 kg, Weight with packaging: 0.208 kg, Nominal diameter: 160 mm, Width: 160 mm, Height: 160 mm, Depth: 160 mm, Width with packaging: 160 mm, Height with packaging: 160 mm, Depth with packaging: 160 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

TFA 12 - Brief informationDisc valve for exhaust air, sheet steel, white, DN 125, for domestic ventilation max. 60 m³/h, including installation frameTFA 12 - Product descriptionDisc valve for ventilation.Elegant, flat design.Stepless regulation of the air flow by means of a rotating valve disc.With bayonet catch for installation frame.Installation frame included in the scope of delivery.Optional accessories: FFE grease trap filter element for use in rooms with greasy exhaust air (kitchens, etc.).

TFZ 12 - Brief informationDisc valve for supply air, sheet steel, white, DN 125, for domestic ventilation max. 60 m³/h, including installation frameTFZ 12 - Product descriptionDisc valve for ventilation.Elegant, flat design.Stepless regulation of the air flow by means of a rotating valve disc.With bayonet catch for installation frame.Installation frame included in the scope of delivery.

Ventilation pipe transition MT-UE160/150 for MAICOTherm pipes, DN160/150Features:Quality Made in GermanySymmetrical ventilation pipe transition - for easy installation. Symmetrical ventilation pipe connector for simple and secure installation with MT-R ventilation pipe, MT-B ventilation pipe bend on ventilation pipes, appliances, wall and roof ducts. Quick, force-fit connection.Attractive design with EPDM rubber - Neutral black colour, compatible with any interior style Suitable for continuous operation.Description:For transition from ventilation duct MT-R or ventilation duct bend MT-B to ventilation ducts (z.B. spiral ducts), appliances, wall and roof ducts. Simple and safe installation. MT-Ü160/150: Can be used z.B. used for transitions on spiral ducts with nominal width 160 and nominal width 150 werden.Artikel: MT-Ü160/150, design: symmetrical, material: EPDM rubber, weight: 0.1 kg, weight with packaging: 0.145 kg, nominal width: 160 mm / 150 mm, inside diameter: 200 mm / 160 mm / 150 mm, outside diameter: 200 mm, width: 150 mm, height: 120 mm, depth: 80 mm, width with packaging: 150 mm, height with packaging: 120 mm, depth with packaging: 80 mm

Elbow, thermally insulated MT-B160 90/45 90 degrees / 45 degrees, DN160Features:Made in Germany quality, vapour diffusion-tightThermally insulated ventilation pipe bend - for easy installation. Thermally insulating ventilation pipe bend. 90° ventilation pipe bend can be divided into two 45° bends by simply sawing them apart. Can be installed using MT-V ventilation pipe connectors or MT-Ü ventilation pipe transitions.Attractive design with insulating polyolefin foam - Neutral black colour, compatible with any interior style Suitable for continuous operation.Description:90° ventilation pipe bend can be divided into two 45° ventilation pipe bends by simply sawing them apart. By means of ventilation pipe connector MT-V or Ventilation pipe transition MT-Ü to montieren.Artikel: MT-B160 90/45, Volume flow: 550 m3/h / recommended, Material inner wall: Insulating polyolefin foam, vapour diffusion-tight, Material casing pipe: Polyethylene (HDPE), Colour: black, Weight: 0.5 kg, Weight with packaging: 0.5 kg, Nominal diameter: 160 mm, Inner diameter: 170 mm, Outer diameter: 200 mm, Width: 301 mm, Height: 200 mm, Depth: 200 mm, Width with packaging: 301 mm, Height with packaging: 200 mm, Depth with packaging: 200 mm, Wall thickness: 15 mm, Conveying medium temperature: -40 °C to 95 °C, Ambient temperature: -40 °C to 95 °C, Thermal conductivity: 0.040 W/m*K at 40 °C, With inner wall made of EA/EU (polyurethane): Insulating polyolefin foam, vapour diffusion-tight

Automatic closing flaps for ventilation. External wall connection when using wall sleeve WH 100 & 120 & 150. With concealed screw holes. Sealing tape included in the scope of delivery. Accessories: FG fly screen can be used. AP 100 B: Cover flap in brown. AP 150: With galvanised Schutzgitter.Artikel: AP 150/1, Air direction: Ventilation, Installation location: Wall, Material: Plastic, weather- and UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Flap type: Self-opening/self-closing, Suitable for use with flyscreens. opening/closing, Suitable for nominal width: 150 mm, Width: 200 mm, Height: 200 mm, Depth: 55 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 57 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for wall-mounted fans: no, Suitable for domestic fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, With installation frame: yes

FE 100/1 SG window installation kit with fixed outer flapFeatures:Made in Germany quality, super quietWindow installation kit - for easy installation in windows and thin wallsSimple installation thanks to interlocking adapters and threaded connectors. Electrical connection to the terminal strip in the housing. Scope of delivery: External flap AP or external grille SG, 3 x spacer frames, 2 x sealing rings, threaded connectors, 3 x screws for fan fastening, strain relief bracket with 2 x screws, cable sheath, installation instructionsAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation.Description:For installation in windows and thin walls. Colour traffic white similar to RAL 9016, housing made of impact-resistant plastic. Scope of delivery: External flap AP or external grille SG, 3 x spacer frames, 2 x sealing rings, threaded connectors, 3 x screws for fan fastening, strain relief bracket with 2 x screws, cable grommet, installation instructions. Installation instructions: Simple installation in the window cut-out thanks to interlocking adapter and threaded spigot. Pane thickness at least 3 mm, pane spacing up to 75 mm. Pane cut-out 115 to 120 mm. Not suitable for installation in hinged double windows. Electrical connection: To the terminal strip in the housing of the ECA 100 ipro...Article: FE 100/1 SG, Installation location: Window / thin wall, Installation position: Horizontal, Material: Plastic, impact-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.4068 kg, Weight with packaging: 0.493 kg, Width: 150 mm, Height: 150 mm, Depth: 103 mm, Width with packaging: 158 mm, Height with packaging: 158 mm, Depth with packaging: 123 mm

Small room fan AKE 150 Cellar dehumidification, 250 m3/h, DN 150Features: Fully automatic, intelligent cellar dehumidification integrated in an exhaust air fan. Permanent equalisation of the absolute humidity indoors and outdoors: fan ventilates independently if the absolute humidity in the room is higher than outside.No maintenance or manual control required: install once and the system works automatically.Delivery volume up to 250 m³/h. Application range up to approx. 70 m² per fan.Concealed air intake thanks to design cover.Frost protection function: system switches off at indoor temperatures below 5 °C.Garage dehumidification: optional switch-off of the frost protection function for unheated rooms.Additional manual operation for 30 min. can be switched on and off again via push-button.Automatic button / switch detection.Status and function display via LEDs. Made in Germany quality, super quiet, fan connection DN 150, protection class IP X5 for safety in cellars, protection class IIFor a better indoor climate in the cellar or laundry room, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically without an additional switch - low-maintenance device. Additional manual operation for 20 min via button. Automatic cellar dehumidification, frost and dry protection function. Uncomplicated one-man installation with standard tools. Continuous operation possible via switch.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any utility room furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Design: Application range up to approx. 70 m2 per fan. Versatile expandability of the system: Connection of a supply air fan (z.B. ECA 15/4 E) possible to increase the air exchange. Fully automatic, intelligent cellar dehumidification for the highest demands. Permanent equalisation of the absolute humidity indoors and outdoors: fan ventilates independently if the absolute humidity in the room is higher than outside. No maintenance or manual control required: install once and the system works automatically. Additional fans without their own dew point control can be connected directly to the AKE up to max. 600 mA and benefit from the intelligence. Fans > 600 mA can be connected with an intermediate relay or contactor and thus also dehumidify larger rooms or several rooms via the AKE. Concealed intake thanks to design cover. Barrier-free product, as it switches on/off automatically without additional switches. Fan monitors the room humidity. Frost protection function: system switches off at indoor temperatures below 5 °C. Dry protection function: Switches the system off at a relative humidity of less than 30 %. Additional manual operation for 20 min. can be switched on and off again using a button. No additional installation from the switch to the device necessary. Additional manual continuous operation with switch possible. Status and function display via LEDs. Scope of delivery: Fan, external cover flap, sensors, 1 m connection cable, housing made of impact-resistant plastic. Thermal overload protection. Protection class II. Frost protection: To prevent the room from cooling down, the AKE has a frost protection function. The fan switches off automatically at indoor temperatures of less than 5 °C. Dry protection: To prevent the room from drying out, the AKE has a dry protection function. The fan switches off automatically at a relative room humidity of less than 30 %. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple installation: AKE 100: core hole drilling 105 mm, or 120 mm for installation with wall sleeve WH 100 accessory. AKE 150: core hole drilling 155 mm, or 170 mm for installation with wall sleeve WH 150. Wall and ceiling installation possible. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Surface-mounted installation for AKE 100 with accessory spacer frame ECA-DR.Artikel: AKE 150, delivery volume: 250 m3/h, speed: 2189 1/min, speed controllable: no, reversibility: no, SEC average: -24.48 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, rated power: 19 W, stand-by power consumption: 2 W, IMax: 0.09 A, protection class: IP X4, mains cable: 5 / 1.5 mm2, Installation location: wall, Installation type: surface-mounted, Installation position: any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 1.8 kg, Weight with packaging: 2.37 kg, Flap: none, Nominal width: 150 mm, Cable length: 1 m, Width: 228 mm, Height: 228 mm, Depth: 178.3 mm, Width with packaging: 303 mm, Height with packaging: 273 mm, Depth with packaging: 303 mm, Wall thickness: max. 0.85 m (if 1 m cable length is not sufficient, please also order the 6 m sensor cable), fluid temperature at IMax: 40 °C, sound pressure level: 40 dB(A) / distance 3 m, free-field conditions

PP 45 RC final assembly set for decentralised ventilation with radioFeatures:Made in Germany quality, protection class IP 00 for greater safety in the bathroomFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldDevice is a good addition to a centralised control system. Consists of fan, ceramic heat exchanger, internal cover with radio control and damper actuator. Electrical connection via plug connection. Integrated condensate drip edge and radio control board. Tool-free cleaning possible. Has 5 different ventilation levels and 3 operating programmes. Attractive design - neutral white colour similar to RAL 9016, compatible with any interior style Suitable for continuous operation. Description:Special features: PP 45 O/K units can be used to create a complete ventilation system in accordance with DIN 1946-6, including integration of the extract air units via a central control system (RLS 45 K). The PP 45 O/K/RC appliance series is the quietest appliance series on the market and impresses with the sound pressure level values (per ventilation level and distance 1 m): 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A). The energy efficiency of two devices + control unit is impressive with an SPI value of 0.11 Wh/m3. Thanks to the very quiet and energy-saving motors and excellent sensor-controlled operation, the appliances achieve the energy efficiency class A+. The PP 45 K and PP 45 RC appliance versions have an electric damper. When the appliances are switched off (level 0), the flap closes automatically. The appliance does not consume any electrical energy. The pipe insert can be removed without tools for cleaning purposes and to change the filter. The two filters can also be changed without tools. The heat exchanger can also be removed for cleaning purposes using a tool. The devices can be operated in 5 different ventilation levels 15/20/30/36/42 m3/h and in 3 operating programmes: continuous ventilation with heat recovery, cross ventilation and sensor-controlled auto mode. Clear commissioning software when using the RLS 45 K control unit simplifies commissioning of the PP 45 O/K units. The settings can be saved as profiles and transferred to other control units. Flow-optimised external covers in the accessories range keep the exhaust air away from the external facade. Final assembly kits for the PushPull 45 single-room ventilation unit with fan, ceramic heat exchanger, internal cover and two integrated filters (ISO Coarse 30 % (G2) and ISO Coarse 45 % (G3)), so that the air is filtered in both directions. Versions: PP 45 K - with electric damper. PP 45 O - with manual damper. PP 45 RC - with radio control and electric damper. To achieve efficient ventilation, we recommend operating the units in pairs. In certain system combinations, an odd number of units is also possible. Required accessories: PP 45 RHK or PP 45 RHL casing sleeve, PP 45 AK, PP 45 AE or PP 45 AW external cover for external wall installation or PP 45 LE reveal element for reveal duct installation, RLS 45 K or RLS 45 O room air control unit for the PP 45 K and PP 45 O final installation sets and DS 45 RC radio switch for the PP 45 RC radio control unit, several devices (max. 6) can be controlled simultaneously via an RLS 45 K or RLS 45 O room air control unit. When using the DS 45 RC radio switch, the number of devices is not limited as long as the devices are within range of the radio switch. Optional accessories: Wall block PP 45 MB, power unit PP 45 LT, EnOcean extension module PP 45 EO, EnOcean actuator PP 45 ACT, humidity sensor PP 45 HYI and PP 45 HY, CO2 sensor PP 45 CO2, VOC sensor PP 45 VOC, air filter, replacement PP 45 G2, PP 45 G3 and PP 45 G2P, approvals and certificates: DIBt approval Z-51.3-416. Test report in accordance with EN 13141-8. Entry in TZWL Bulletin. Heat exchanger: With the high-performance heat exchanger and the highly efficient EC fan, the appliances achieve a heat recovery efficiency of 84.3 % at the reference volume flow rate in accordance with EN 13141-8. Installation instructions: Installation is carried out in 2 steps: Installation of the PP 45 RHK (DN 160) or RHL (DN 160) casing sleeve and an external cover in a DN 160 core drill hole with an incline of 1-2 %. We recommend drilling the core hole with DN 182 and aligning the inclination of the sleeve using the polystyrene wedges supplied. The shell sleeve is protected from contamination with plaster covers. The final assembly set is then integrated. No pipe laying or adjustment of the system is necessary. Electrical connection: The appliance is supplied ready for operation. Electrical connection is by means of a plug connection. Connection to the RLS 45 K or RLS 45 O room air control system via plug-in control cables. The 12 VDC power cable from the RLS 45 K / RLS 45 O room air control unit to the appliance is also the control cable. Condensate drain: The condensate is drained via an integrated condensate drip edge in the outerenabdeckung.Artikel: PP 45 RC, Version: wireless version, electric damper, Delivery volume: 15 m3/h / 20 m3/h / 30 m3/h / 36 m3/h / 42 m3/h, Energy efficiency class: A+, Rated voltage: 230 V, SPI value to DIN EN 13141-8: 0.12 Wh/m3, Maximum power consumption: 1.2 W / 1.7 W / 2.1 W / 2.8 W / 3.5 W, Protection rating: IP 00, DIBT approval: yes, Installation position: horizontal, System type: decentralised, Material: plastic, Housing material: plastic, Heat exchanger material: ceramic, Colour: traffic white, similar to RAL 9016, Weight: 3.178 kg, Weight with packaging: 3.92 kg, Filter type: external and exhaust air filter, Filter class: ISO Coarse 30 % (G2) / ISO Coarse 45 % (G3), Connection diameter: 160 mm, Width: 246 mm, Height: 246 mm, Depth: 282 mm, Width with packaging: 260 mm, Height with packaging: 247 mm, Depth with packaging: 300 mm, Required wall opening: 162 to 182 mm, Wall thickness: 265 mm (if the insert is flush with the wall sleeve) / 500 mm, Heat provision level at reference volume flow rate according to DIN EN 13141-8: 84.3 %, Required room air control: DS 45 RC or RLS 45 K with PP 45 EO, Sound pressure level: 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A) / distance 1 m, Free field conditions, Weighted max. Element standard sound level difference Dn,w: 51 dB / measured with PP 45 LE and flap closed, 51 dB measured with PP45 AE, 2x PP45 SE, flap closed, 46 dB measured with PP45 LE, PP45 LEW90, flap open, Approval number: Z-51.3-416, Type of ventilation: decentralised supply and exhaust air, Heat recovery via: other, Heat recovery efficiency: 84.3 %

External grille SG 150/1 for aeration and ventilation, DN150, whiteDescription:External grille for ventilation and air extraction. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Article: SG 150/1, Air direction: Ventilation and extraction, Installation: outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, weather and UV-resistant, Colour: traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Width: 200 mm, Height: 200 mm, Depth: 56 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 58 mm,Ambient temperature: 60 °C, Suitable for box fans: no, Suitable for roof ventilators: no, Suitable for duct fans: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, Front diameter: 144 mm, Installation depth: 29 mm , With wire mesh: yes, With insect screen: no, With overpressure flap, intake: no , With pressure relief flap, blow-out: no , With counter-rotating flap valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no

Surface-mounted fan ER-APB 60 61 m3/h, fire protection, standardFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed-controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Standard version: ER 100: Speed controllable. ER 60: Not speed controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60, Version: Standard version, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.87 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.12 kg, Weight with packaging: 2.68 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 43 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

DS 45 RC radio switch for PP 45 RC or PP 45 with PP 45 EOFeatures:Quality Made in GermanyRadio switch - for simple control. Has 5 ventilation levels, 3 operating modes and sensor-guided auto mode. Programmes: Continuous ventilation with heat recovery, cross ventilation and sensor-guided auto mode, time-limited intensive ventilation and switch-off. Radio switch requires no batteries. Attractive design - Neutral white powder-coated similar to RAL 9010, compatible with any interior style Suitable for continuous operation. Description:Special features: The DS 45 RC radio switch can be used to select 5 ventilation levels PP 45 - 15/20/30/36/42 m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes: continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto mode. Continuous ventilation mode with heat recovery: PushPull operation. The devices run alternately and change direction every 60 seconds. Cross ventilation operating mode: One unit is permanently in supply air mode and the corresponding unit is in extract air mode (z.B. for summer night cooling). Automatic operation is only possible with the optional PP 45 HYI humidity sensor integrated in the RC unit. Individual operation of the PP 45 RC and PPB 30 RC with the DS 45 RC radio switch is also possible. Time-limited intensive ventilation (shock ventilation) or time-limited switch-off (sleep function) can also be selected at the touch of a button. Any number of devices can be controlled via the DS 45 RC radio switch, provided they are within range. Can be used wherever no control cable can be installed. The radio switch does not require a battery. The radio switch can be screwed on or glued to glass surfaces. The radio switch is required as an accessory for the PP 45 RC and PPB 30 RC final installation setstigt.Artikel: DS 45 RC, Mains cable: not required, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.056 kg, Weight with packaging: 0.074 kg, Width: 80 mm, Height: 80 mm, Depth: 15 mm, Width with packaging: 90 mm, Height with packaging: 90 mm, Depth with packaging: 37 mm

TFA 10 - Brief informationDisc valve for exhaust air, sheet steel, white, DN 100, for domestic ventilation max. 30 m³/h, including installation frameTFA 10 - Product descriptionDisc valve for ventilation.Elegant, flat design.Stepless regulation of the air flow by means of a rotating valve disc.With bayonet catch for installation frame.Installation frame included in the scope of delivery.Optional accessories: FFE grease trap filter element for use in rooms with greasy exhaust air (kitchens, etc.).

Fixing clamp MT-LS160 for mounting MAICOTherm, DN160Features:Quality Made in GermanyFixing clip with M8 threaded socket - for easy installation. Two-part fixing clip with pre-assembled clamping screw. With hinge screw for secure and simple quick-lock installation. Can be mounted by hanging without tools.Attractive design with galvanised sheet steel - Compatible with any interior style Suitable for continuous operation.Description:Two-part fixing clip with pre-assembled clamping screws for mounting the MAICOTherm MT thermally insulated ventilation pipe system. Equipped with hinged screw for secure and simple quick-lock installation. Quick installation as the pipes/elbows can be attached without tools kann.Artikel: MT-LS160, Air direction: Ventilation, Installation location: Ceiling / wall / floor, Material: Sheet steel, galvanised, Weight: 0.18 kg, Weight with packaging: 0.2 kg, Nominal width: 160 mm, Suitable for nominal width: 200 mm, Width: 260 mm, Height: 145 mm, Depth: 20 mm, Width with packaging: 260 mm, Height with packaging: 145 mm, Depth with packaging: 20 mm, Thread: M8

Air filter, ZF 17 S for ZF 17/60-2 and 17/100...Features:Quality Made in GermanyAir filter - for easy installationFor fan inserts ER 17/60-2 and ERA 17/100, filter class G2.Attractive design - compatible with any furnishing styleSuitable for continuous operation.Description:ZF 17 S: Replacement air filter for fan insert ER 17/60-2... and ER 17/100....Article: ZF 17 S, Installation position: vertical / horizontal, Weight: 0.002 kg, Weight with packaging: 0.02 kg, Filter class: ISO Coarse 30 % (G2), Width: 220 mm, Height: 34 mm, Depth: 175 mm, Width with packaging: 260 mm, Height with packaging: 175 mm, Depth with packaging: 20 mm, Suitable for box fans: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Surface-mounted fan ER-APB 100 100 m3/h, fire protection, standardFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Standard version: ER 100: Speed controllable. ER 60: Not speed controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100, Version: Standard version, Delivery volume: 100 m3/h, Speed: 1850 1/min, Air direction: Ventilation, Speed controllable: yes, SEC average: -6.47 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 28.5 W, IMax: 0.15 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.08 kg, Weight with packaging: 2.64 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 49 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

Ventilation pipe transition MT-UE125 for MAICOTherm pipes, DN125Features:Quality Made in GermanyAsymmetrical ventilation pipe transition - for easy installation. Ventilation pipe connector for simple and secure installation with MT-R ventilation pipe, MT-B ventilation pipe bend on ventilation pipes, appliances, wall and roof ducts. Quick, force-fit connection.Attractive design with EPDM rubber - Neutral black, compatible with any interior style Suitable for continuous operation.Description:For transition from ventilation duct MT-R or ventilation duct bend MT-B to ventilation ducts (z.B. spiral ducts), appliances, wall and roof ducts. Simple and safe installation. MT-Ü160/150: Can be used z.B. used for transitions on spiral ducts with nominal width 160 and nominal width 150 werden.Artikel: MT-Ü125, design: symmetrical, material: EPDM rubber, weight: 0.1 kg, weight with packaging: 0.11 kg, nominal width: 125 mm, inside diameter: 160 mm / 125 mm, outside diameter: 160 mm, width: 90 mm, height: 110 mm, depth: 80 mm, width with packaging: 90 mm, height with packaging: 110 mm, depth with packaging: 80 mm

Humidity sensor as spare part for various small room fans of the ECA 100 ipro groups and various ventilation units with heat recovery of the Trio, WS 160 Flat, WS 170 and WS 300 groups Flat.Artikel: SE ECA 100 ipro H, material housing: plastic, colour: white, weight: 0.01 kg, weight with packaging: 0.05 kg, width: 25 mm, height: 35 mm, depth: 17 mm, width with packaging: 175 mm, height with packaging: 250 mm, depth with packaging: 25 mm