Aluminium flexible pipe AFR 150 flexible, five-layer grooved, DN150Features:Quality Made in GermanyAluminium flexible pipe - as a connection pipe to the main pipeNon-combustible in accordance with DIN 4102 class A1. For use as a connection pipe to the main pipe.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Flexible five-layer grooved aluminium conduit for use as a connection line to the main line in accordance with DIN 18017-3. Non-combustible in accordance with DIN 4102 class A1. Length specifications: Stretched length: AFR 150, Max. Operating pressure: 2500 Pa, Installation type: Flush-mounted, Material: Aluminium, Weight: 1.34 kg, Weight with packaging: 1.5 kg, Suitable for nominal width: 150 mm, Length: 10 m, Width: 10000 mm, Height: 155 mm, Depth: 155 mm, Width with packaging: 405 mm, Height with packaging: 175 mm, Depth with packaging: 175 mm, Ambient temperature: 100 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for residential ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Hygrostat HY 230 External control elementFeatures:Made in Germany quality, protection class IP 30 for safety in the homeHygrostat - for simple controlExternal control element. Used for dehumidifying or humidifying closed rooms. The operating mode can be selected using a dip switch.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:The HY 230 or HY 230 I electronic hygrostat is used for dehumidifying or humidifying closed rooms. It is suitable for all living areas and commercial premises, including damp rooms such as bathrooms. Bathrooms (please observe protection class when installing), washrooms and drying rooms. The hygrostat uses an internal sensor to detect the room humidity and switches the fans, heat recovery units, humidifiers or dehumidifiers on and off depending on the set target value. The HY 230 or HY 230 I is either mounted directly on a flush-mounted box or mounted on the wall using the APM HY 230 surface-mounting set. The operating mode dehumidification (factory setting) or humidification can be set during commissioning using a dip switch on the circuit board. A red LED in the housing indicates the switching status of the relay angezeigt.Artikel: HY 230, Voltage type: AC, Rated voltage: 230 V, Output: 230 V, Mains frequency: 50 Hz, Relative humidity measuring range: 20 % - 80 %, Installation type: Surface-mounted, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.0753 kg, Weight with packaging: 0.089 kg, Width: 71 mm, Height: 71 mm, Depth: 27 mm, Width with packaging: 75 mm, Height with packaging: 80 mm, Depth with packaging: 36 mm, Ambient temperature: 0 °C to 50 °C, Operating element: External, Sensor tolerance, relative humidity: 5 %, Switching differential, relative humidity: 2.5 %, Max. permissible switching current: 10 A / 4 A / cos phi = 1, 230 V AC / cos phi = 0.6, 230 V AC, Max. permissible inrush current: 16 A, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: yes, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Internal lock, electric AE 15/1 DN150Features:Made in Germany quality, super quiet, protection class IP X4 for safety in the homeElectric internal closure flap - for simple ventilation and extractionRegulation of basic ventilation through adjustable opening angle. Heat energy-saving as required. Control with switch, timers and overrun relay. Attractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Internal flap for ventilation. Regulation of basic ventilation through adjustable opening angle. Heat energy-saving thanks to opening as required. Activation with commercially available off-switches, timers and overrun relays. Protection class IPX4. AE 10/1 can be combined with the window installation kit FE 100/1.Artikel: AE 15/1, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 5 W, Protection rating: IP X4, Mains cable: 3 / 1.5 mm2, Installation: Inside, Installation location: Wall / ceiling, Installation location: Basement, Installation type: Surface-mounted, Installation position: Vertical / horizontal, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.744 kg, Weight with packaging: 1.002 kg, Flap type: Electric, Nominal width: 150 mm, Suitable for nominal width: 150 mm, Width: 228 mm, Height: 228 mm, Depth: 108 mm, Width with packaging: 245 mm, Height with packaging: 320 mm, Depth with packaging: 125 mm, Ambient temperature: 40 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted fans: no, Suitable for domestic fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 228 mm, Front width: 228 mm, With installation frame: yes

Door ventilation grille MLK 45 white white, length approx. 450 mmFeatures:Quality Made in GermanyDoor ventilation grille - for easy installationDoor cut-out: 436 x 76 mm, external dimensions: 457 x 92 mmAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Door ventilation grille for bathroom, WC, kitchen. Free cross-section in accordance with FeuVo 80 and TRGI 86. MLK 30: Door cut-out: 275 x 105 mm, external dimensions: 295 x 120 mm. MLK 45: Door cut-out: 436 x 76 mm, external dimensions: 457 x 92 mm.Artikel: MLK 45 white, air direction: ventilation, installation: inside, installation location: door, material: plastic, plastic specifications: Polystyrene, PVC-free, Colour: white, Weight: 0.27 kg, Weight with packaging: 0.31 kg, Free cross-section: 154 cm2, Width: 457 mm, Height: 92 mm, Depth: 38 mm, Width with packaging: 458 mm, Height with packaging: 93 mm, Depth with packaging: 36 mm, Minimum door leaf thickness: 35 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Wall sleeve WH 150 plastic, extendable, DN150Features:Quality Made in GermanyWall sleeve - for easy installationFor wall and ceiling mounting. Variable length.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Wall sleeve for wall and ceiling mounting. Length variabel.Artikel: WH 150, Installation location: Wall / ceiling, Material: Plastic, Weight: 1.35 kg, Weight with packaging: 1.4 kg, Suitable for nominal diameter: 150 mm, Width: 168 mm, Height: 168 mm, Depth: 500 mm, Width with packaging: 168 mm, Height with packaging: 168 mm, Depth with packaging: 500 mm, Required core drilling: min. 169 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Automatic closing flaps for ventilation. External wall connection when using wall sleeve WH 100 & 120 & 150. With concealed screw holes. Sealing tape included in the scope of delivery. Accessories: FG fly screen can be used. AP 100 B: Cover flap in brown. AP 150: With galvanised Schutzgitter.Artikel: AP 150/1, Air direction: Ventilation, Installation location: Wall, Material: Plastic, weather- and UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Flap type: Self-opening/self-closing, Suitable for use with flyscreens. opening/closing, Suitable for nominal width: 150 mm, Width: 200 mm, Height: 200 mm, Depth: 55 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 57 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for wall-mounted fans: no, Suitable for domestic fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, With installation frame: yes

Outdoor air diffuser ALD 10 infinitely variableFeatures:Quality Made in GermanyFresh air diffuser - for decentralised home ventilationInfinitely variable regulation of the air flow. No electrical connection necessary. G2 filter. Scope of delivery: inner part, dust or insect filter, wall sleeve up to 500 mm, outer grille with fly screenAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Fresh air diffuser for draught-free, decentralised home ventilation. Stepless regulation of the air flow. No electrical connection necessary. Packaging unit: Inner part, dust or insect filter, wall sleeve up to 500 mm, outer grille with fly screen. Accessories: Storm protection ALDS 10, replacement filter ALDF 10.Artikel: ALD 10, Air direction: Ventilation, Max. Volume flow: 32 m3/h / At 10 Pa, Installation location: Wall, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.983 kg, Weight with packaging: 1.21 kg, Filter type: Dust filter, Filter class: ISO Coarse 30 % (G2), Flap type: Manual, Nominal width: 100 mm, Width: 150 mm, Height: 150 mm, Depth: 580 mm, Width with packaging: 280 mm, Height with packaging: 155 mm, Depth with packaging: 280 mm, Ambient temperature: 60 °C, Rated max. Element standard sound level difference Dn,w: 31 dB, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Spacer frame ECA15-EMA16 for mounting ECA 150 fansFeatures:Quality Made in GermanySpacer frame - for easy installationFor mounting ECA 150 ipro fans in square wall sleeves WH 16 of the earlier EMA 16, EMA 17 and EMA 18 fansAttractive design - compatible with any interior styleSuitable for continuous operation.Description:Spacer for mounting ECA 150 ipro fans in square wall sleeves WH 16 of the previous fans EMA 16, EMA 17 and EMA 18.Artikel: ECA15-EMA16, Installation location: wall / ceiling, Material: hard foam, Colour: black, Weight: 0.03 kg, Weight with packaging: 0.03 kg, Width: 185 mm, Height: 185 mm, Depth: 60 mm, Width with packaging: 185 mm, Height with packaging: 185 mm, Depth with packaging: 60 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Hygrostat HY 230 I Internal Control ElementFeatures:Quality Made in Germany, protection class IP 30 for safety in the homeHygrostat – for simple controlInternal control element. Used for dehumidifying or humidifying enclosed rooms. The operating mode can be selected using a dip switch.Attractive design – compatible with any interior styleSuitable for continuous operation.Description:The electronic hygrostat HY 230 or HY 230 I is used for dehumidifying or humidifying enclosed rooms. It is suitable for all residential and commercial areas, including damp rooms such as bathrooms (please observe the protection class during installation), laundry and drying rooms. The hygrostat detects the room humidity with an internal sensor and switches fans, heat recovery units or humidifying/dehumidifying devices on and off depending on the set target value. The HY 230 or HY 230 I is either mounted directly on a flush-mounted box or on the wall using the surface-mounted mounting set APM HY 230. The operating mode can be set to dehumidifying (factory setting) or humidifying via a dip switch on the circuit board during commissioning. A red LED in the housing indicates the relay switching status.Article: HY 230 I, Voltage type: AC, Rated voltage: 230 V, Output: 230 V, Mains frequency: 50 Hz, Measurement range relative humidity: 20 % - 80 %, Installation type: surface-mounted, Material: plastic, Colour: pure white, similar to RAL 9010, Weight: 0.0685 kg, Weight with packaging: 0.083 kg, Width: 71 mm, Height: 71 mm, Depth: 27 mm, Width with packaging: 75 mm, Height with packaging: 80 mm, Depth with packaging: 36 mm, Ambient temperature: 0 °C to 50 °C, Control element: internal, Sensor tolerance, relative humidity: 5 %, Switching differential, relative humidity: 2.5 %, Max. permissible switching current: 10 A / 4 A / cos phi = 1, 230 V AC / cos phi = 0.6, 230 V AC, Max. permissible inrush current: 16 A, Suitable for box fans: no, Suitable for roof fans: yes, Suitable for duct fans: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: yes, Suitable for wall-mounted built-in fans: yes, Suitable for residential fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no

Door ventilation grille MLK 30 white white, length approx. 300 mmFeatures:Quality Made in GermanyDoor ventilation grille - easy to installDoor cut-out: 275 x 105 mm, external dimensions: 295 x 120 mmAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior styleSuitable for continuous operation.Description:Door ventilation grille for bathroom, WC, kitchen. Free cross-section according to FeuVo 80 and TRGI 86. MLK 30: Door cut-out: 275 x 105 mm, external dimensions: 295 x 120 mm. MLK 45: Door cut-out: 436 x 76 mm, external dimensions: 457 x 92 mm. Item: MLK 30 white, air direction: supply and exhaust ventilation, installation: inside, installation location: door, material: plastic, plastic details: polystyrene, PVC-free, colour: white, weight: 0.2 kg, weight with packaging: 0.215 kg, free cross-section: 164 cm², width: 290 mm, height: 125 mm, depth: 38 mm, width with packaging: 300 mm, height with packaging: 125 mm, depth with packaging: 51 mm, minimum door leaf thickness: 36 mm, suitable for box fans: no, suitable for roof fans: no, suitable for duct fans: no, suitable for heat recovery systems: yes, suitable for wall construction fans: yes, suitable for wall-mounted fans: no, suitable for residential fans: yes, suitable for centrifugal fans: no, suitable for circulation fans: no

SG 150/1 - Brief InformationExternal grille made of plastic for supply and exhaust air, DN 150, whiteSG 150/1 - Product DescriptionExternal grille for supply and exhaust air.External wall connection when using the wall sleeve WH.With concealed screw holes.Sealing tape included in the scope of delivery.Accessories: Fly screen FG can be used.SG 100 / SG 100 B: Air filter retrofittable ZRF.SG 120: Air filter retrofittable SF 120. ArticleSG 150/1Airflow directionSupply and exhaust airInstallationOutsideInstallation locationWallType of installationSurface-mountedMaterialPlastic, weatherproof, UV-resistantColourTraffic white, similar to RAL 9016Weight0.4 kgWeight with packaging0.41 kgSuitable for nominal size150 mmWidth200 mmHeight200 mmDepth56 mmWidth with packaging202 mmHeight with packaging202 mmDepth with packaging58 mmAmbient temperature60 °CPackaging unit1 pieceRangeAGTIN (EAN)4012799599975Article number0059.0997