Maico ECA 150 ipro RCH small room fan 0084.0088
€447.29
Free shipping
Available immediately, delivery time: 2-5 working days
Product information "Maico ECA 150 ipro RCH small room fan 0084.0088"
Features:
- Made in Germany quality, super quiet, fan connection DN 150, protection class IP X5 for safety in the office, protection class II
- For a better indoor climate in the office or home, The low-noise small room fan - the elegant solution against humidity, unpleasant odours and mould
- Barrier-free product, as on/off via automatic humidity control or separate control or radio switch. Uncomplicated one-man installation with standard tools - low-maintenance device. Speeds can be selected on the radio switch or on the control unit. Not speed-controllable. Flush-mounted electrical connection. Can be operated with double rocker switch. No need to set the switch-on humidity.
- Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any office furnishing style Housing made of impact-resistant plastic
- Suitable for continuous operation. Energy-saving, robust motor with sealed ball bearings on both sides
Description:
Version with radio receiver and humidity control: With integrated 868 MHz radio receiver and humidity control. Barrier-free product, as automatic switch-on / switch-off via humidity sensor. No need to set the switch-on humidity. Fan monitors the humidity curve. Ventilates automatically at level 1 or level 2 depending on the room humidity. Can be switched with separate DS RC radio switch or separate RLS RC control unit. The two speeds can be selected either on the radio switch or on the control unit. Not speed-controllable. Radio-controlled fan for the MAICOsmart extract air system, with built-in 868 MHz radio receiver, based on EnOcean technology. The fan can be operated with a double rocker switch (DS RC) (no cable routing required between switch and fan). The fan can be installed in a master-slave network with other ECA 150 ipro RC/RCH/KRC/KRCH (RLS RC required). A combination of ECA 150 ipro RC/RCH/KRC/KRCH with ECA 100 ipro RC/RCH or ER 100 RC is not possible. Two performance levels. Concealed intake through design cover. For ventilation. With VDE-GS mark. Protection class IP X5 for safety in the bathroom. Protection class II. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation, as cover can be easily removed with tools. Compatible with ECA predecessor models DN 150, as the fixing holes and flush-mounted cable entry are in the same place. Electrical connection: Flush-mounted electrical connection. Safety note: The fans comply with protection class IP X5 and can therefore be installed in protection zone 1 in accordance with DIN VDE 0100-701. For details, see planning information chapter Kleinraumventilatoren.Artikel: ECA 150 ipro RCH, Version: Radio receiver and humidity control, Delivery volume: 200 m3/h / 250 m3/h, Speed: 1672 1/min / 2189 1/min, Speed controllable: no, Reversible: no, SEC average: -24.57 kWh/(m2*a), Voltage type: AC, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 15 W / 19 W, IMax: 0.09 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Ceiling / wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.62 kg, Weight with packaging: 1.896 kg, Flap: None, Nominal width: 150 mm, Width: 228 mm, Height: 228 mm, depth: 189.3 mm, width with packaging: 235 mm, height with packaging: 235 mm, depth with packaging: 200 mm, fluid temperature at IMax: 40 °C, sound pressure level: 33 dB(A) / 40 dB(A) / distance 3 m, free field conditions
Warnung vor elektrischer Spannung
Allgemeines Warnzeichen
Matching accessories
Aluminium flexible pipe AFR 150 flexible, five-layer grooved, DN150Features:Quality Made in GermanyAluminium flexible pipe - as a connection pipe to the main pipeNon-combustible in accordance with DIN 4102 class A1. For use as a connection pipe to the main pipe.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Flexible five-layer grooved aluminium conduit for use as a connection line to the main line in accordance with DIN 18017-3. Non-combustible in accordance with DIN 4102 class A1. Length specifications: Stretched length: AFR 150, Max. Operating pressure: 2500 Pa, Installation type: Flush-mounted, Material: Aluminium, Weight: 1.34 kg, Weight with packaging: 1.5 kg, Suitable for nominal width: 150 mm, Length: 10 m, Width: 10000 mm, Height: 155 mm, Depth: 155 mm, Width with packaging: 405 mm, Height with packaging: 175 mm, Depth with packaging: 175 mm, Ambient temperature: 100 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for residential ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
Radio switch DS RC Radio switch for MAICOsmartFeatures:Made in Germany quality, protection class IP 20 for safety in the officeFor simple operation of the fan in the office or home - the elegant control unit. Radio switch can be used individually or with the MAICOsmart system. For refurbishments and retrofitting. Can be used anywhere where no control cable can be installed. Requires no batteries and is mobile. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any office furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Description:EnOcean wireless switch. The wireless switch can be used individually with the ECA ... ipro RC/RCH, ER 100 RC or with the MAICOsmart system. The radio switch can also be used in combination with the EnOcean plug-in module E-SM to control the central ventilation units WS 160 Flat, WS 170 KBR../WS 170 KBL.., WS 320/470 and WR 310/410 via EnOcean. For refurbishments and retrofitting - no painting or wallpapering required. Tiles do not need to be removed or replaced. Can be used wherever no control cable can be installed. Radio switch is mobile. Radio switch does not require a battery. Radio switch can be screwed or glued to glass surfaces. Simple programming of the transmitters saves time-consuming Programmierarbeit.Artikel: DS RC, Battery: not required, Protection rating: IP 20, Mains cable: not required, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.065 kg, Weight with packaging: 0.115 kg, Width: 83 mm, Height: 83 mm, Depth: 16 mm, Width with packaging: 87 mm, Height with packaging: 87 mm, Depth with packaging: 75 mm, Ambient temperature: -25 °C to 65 °C, Radio frequency: 868.3 MHz, Number of radio channels: 4 channels, Range in building: 30 m
Door ventilation grille MLK 45 white white, length approx. 450 mmFeatures:Quality Made in GermanyDoor ventilation grille - for easy installationDoor cut-out: 436 x 76 mm, external dimensions: 457 x 92 mmAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Door ventilation grille for bathroom, WC, kitchen. Free cross-section in accordance with FeuVo 80 and TRGI 86. MLK 30: Door cut-out: 275 x 105 mm, external dimensions: 295 x 120 mm. MLK 45: Door cut-out: 436 x 76 mm, external dimensions: 457 x 92 mm.Artikel: MLK 45 white, air direction: ventilation, installation: inside, installation location: door, material: plastic, plastic specifications: Polystyrene, PVC-free, Colour: white, Weight: 0.27 kg, Weight with packaging: 0.31 kg, Free cross-section: 154 cm2, Width: 457 mm, Height: 92 mm, Depth: 38 mm, Width with packaging: 458 mm, Height with packaging: 93 mm, Depth with packaging: 36 mm, Minimum door leaf thickness: 35 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
Wall sleeve WH 150 plastic, extendable, DN150Features:Quality Made in GermanyWall sleeve - for easy installationFor wall and ceiling mounting. Variable length.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Wall sleeve for wall and ceiling mounting. Length variabel.Artikel: WH 150, Installation location: Wall / ceiling, Material: Plastic, Weight: 1.35 kg, Weight with packaging: 1.4 kg, Suitable for nominal diameter: 150 mm, Width: 168 mm, Height: 168 mm, Depth: 500 mm, Width with packaging: 168 mm, Height with packaging: 168 mm, Depth with packaging: 500 mm, Required core drilling: min. 169 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
Automatic closing flaps for ventilation. External wall connection when using wall sleeve WH 100 & 120 & 150. With concealed screw holes. Sealing tape included in the scope of delivery. Accessories: FG fly screen can be used. AP 100 B: Cover flap in brown. AP 150: With galvanised Schutzgitter.Artikel: AP 150/1, Air direction: Ventilation, Installation location: Wall, Material: Plastic, weather- and UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Flap type: Self-opening/self-closing, Suitable for use with flyscreens. opening/closing, Suitable for nominal width: 150 mm, Width: 200 mm, Height: 200 mm, Depth: 55 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 57 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for wall-mounted fans: no, Suitable for domestic fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, With installation frame: yes
Outdoor air diffuser ALD 10 infinitely variableFeatures:Quality Made in GermanyFresh air diffuser - for decentralised home ventilationInfinitely variable regulation of the air flow. No electrical connection necessary. G2 filter. Scope of delivery: inner part, dust or insect filter, wall sleeve up to 500 mm, outer grille with fly screenAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Fresh air diffuser for draught-free, decentralised home ventilation. Stepless regulation of the air flow. No electrical connection necessary. Packaging unit: Inner part, dust or insect filter, wall sleeve up to 500 mm, outer grille with fly screen. Accessories: Storm protection ALDS 10, replacement filter ALDF 10.Artikel: ALD 10, Air direction: Ventilation, Max. Volume flow: 32 m3/h / At 10 Pa, Installation location: Wall, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.983 kg, Weight with packaging: 1.21 kg, Filter type: Dust filter, Filter class: ISO Coarse 30 % (G2), Flap type: Manual, Nominal width: 100 mm, Width: 150 mm, Height: 150 mm, Depth: 580 mm, Width with packaging: 280 mm, Height with packaging: 155 mm, Depth with packaging: 280 mm, Ambient temperature: 60 °C, Rated max. Element standard sound level difference Dn,w: 31 dB, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
Spacer frame ECA15-EMA16 for mounting ECA 150 fansFeatures:Quality Made in GermanySpacer frame - for easy installationFor mounting ECA 150 ipro fans in square wall sleeves WH 16 of the earlier EMA 16, EMA 17 and EMA 18 fansAttractive design - compatible with any interior styleSuitable for continuous operation.Description:Spacer for mounting ECA 150 ipro fans in square wall sleeves WH 16 of the previous fans EMA 16, EMA 17 and EMA 18.Artikel: ECA15-EMA16, Installation location: wall / ceiling, Material: hard foam, Colour: black, Weight: 0.03 kg, Weight with packaging: 0.03 kg, Width: 185 mm, Height: 185 mm, Depth: 60 mm, Width with packaging: 185 mm, Height with packaging: 185 mm, Depth with packaging: 60 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
Door ventilation grille MLK 30 white white, length approx. 300 mmFeatures:Quality Made in GermanyDoor ventilation grille - for easy installationDoor cut-out: 275 x 105 mm, external dimensions: 295 x 120 mmAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:Door ventilation grille for bathroom, WC, kitchen. Free cross-section in accordance with FeuVo 80 and TRGI 86. MLK 30: Door cut-out: 275 x 105 mm, external dimensions: 295 x 120 mm. MLK 45: Door cut-out: 436 x 76 mm, external dimensions: 457 x 92 mm.Artikel: MLK 30 white, air direction: ventilation, installation: inside, installation location: door, material: plastic, plastic details: Polystyrene, PVC-free, Colour: white, Weight: 0.2 kg, Weight with packaging: 0.215 kg, Free cross-section: 164 cm2, Width: 290 mm, Height: 125 mm, Depth: 38 mm, Width with packaging: 300 mm, Height with packaging: 125 mm, Depth with packaging: 51 mm, Minimum door leaf thickness: 36 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
External grille SG 150/1 for aeration and ventilation, DN150, whiteDescription:External grille for ventilation and air extraction. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Article: SG 150/1, Air direction: Ventilation and extraction, Installation: outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, weather and UV-resistant, Colour: traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Width: 200 mm, Height: 200 mm, Depth: 56 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 58 mm,Ambient temperature: 60 °C, Suitable for box fans: no, Suitable for roof ventilators: no, Suitable for duct fans: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, Front diameter: 144 mm, Installation depth: 29 mm , With wire mesh: yes, With insect screen: no, With overpressure flap, intake: no , With pressure relief flap, blow-out: no , With counter-rotating flap valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no