Maico centrifugal roof fan MDR 40 EC 0087.0029

Potentiometer ST EC 3 Rated voltage 10 - 15 V, 3 stepsFeatures:Made in Germany quality, protection class IP 54 for safety in the homePotentiometer - for easy installationOutput signal 0-10 V. Rated voltage 10-15 V. Can be flush-mounted or surface-mounted. In 3 adjustable steps.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Potentiometer for controlling EC fans. Output voltage for ST EC 10 and ST EC 230 continuously adjustable between 0 - 10 V via rotary knob. ST EC 3 allows regulation of the output voltage via 3 stages: Stage 1 = 3 - 7 V adjustable, stage 2 = 5 - 9 V adjustable, stage 3 = 10 V, installation of the potentiometer is possible both in a flush-mounted box without housing (IP 44) and surface-mounted with the housing (IP 54). An additional switching contact on the ST EC 010 enables the connection of a controller enable, for example. ST EC 230 for connection to a 230 V power supply. ST EC 010 for connection to a 10 V power supply. ST EC 3 for connection to a power supply of 10 - 15 V.Artikel: ST EC 3, Voltage type: direct current, Rated voltage: 10 V - 15 V, Output signal: 0 V - 10 V, Protection rating: IP 54, Installation type: surface-mounted / flush-mounted, Housing material: plastic, Colour: pure white, similar to RAL 9010, Weight: 0.135 kg, Weight with packaging: 0.16 kg, Width: 82 mm, Height: 82 mm, Depth: 65 mm, Width with packaging: 95 mm, Height with packaging: 85 mm, Depth with packaging: 70 mm, Suitable for box ventilators: yes, Suitable for roof ventilators: yes, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Flat roof base for mounting roof fans. With non-combustible sound and heat insulation ##########_0__: SO 40, Housing material: Galvanised sheet steel, Weight: 12 kg, Weight with packaging: 17.177 kg, Suitable for nominal width: 400 mm, Width: 1050 mm, Height: 290 mm, Depth: 1050 mm, Width with packaging: 1050 mm, Height with packaging: 290 mm, Depth with packaging: 1050 mm, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Silencer for noise reduction on the intake side of roof fans. With sound attenuation baffles made of abrasion-resistant and non-combustible mineral fibre boards. Recommended accessories: SZ intermediate connection piece for the connection of Rohrleitungen.Artikel: SD 40, Max. Flow velocity: 20 m/s, Housing material: galvanised sheet steel, Weight: 39 kg, Weight with packaging: 39 kg, Suitable for nominal width: 400 mm, Width: 995 mm, Height: 850 mm, Depth: 995 mm, Width with packaging: 995 mm, Height with packaging: 850 mm, Depth with packaging: 995 mm, Insertion loss at 125 Hz: 1 dB, Insertion loss at 250 Hz: 9 dB, Insertion loss at 500 Hz: 21 dB, Insertion loss at 1 kHz: 19 dB, Insertion loss at 2 kHz: 19 dB, Insertion loss at 4 kHz: 16 dB, Total insertion loss: 11 dB, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Pitched roof plinth for mounting roof fans. With sound and heat insulation made of abrasion-resistant and non-combustible mineral fibre boards. Standard versions up to 30° roof pitch. Different plinth heights and versions for roof pitches greater than 30° available on request. For use on trapezoidal and corrugated roofs. Fit suitable profile shape on site. Provide profiled sheeting on site. Note: Corrugated and trapezoidal roof bases are manufactured according to customer specifications. A return is therefore not possibleglich.Artikel: SOWT 40, Version: up to 30° roof pitch, Material housing: sheet steel, galvanised, Weight: 19 kg, Weight with packaging: 20 kg, Suitable for nominal width: 400 mm, Width: 995 mm, Height: 290 mm, Depth: 955 mm, Width with packaging: 1040 mm, Height with packaging: 870 mm, Depth with packaging: 500 mm, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Flexible connection pieces for sound- and vibration-damped connection of ventilation ducts. With flanges on the fan side. With push-in spigots on the duct side. ELA ..: Made of plastic. ELA ... Ex: Made of antistatic material for use in potentially explosive atmospheres Bereichen.Artikel: ELA 40, Flange material: Galvanised steel, Collar material: Plastic, Weight: 2.77 kg, Weight with packaging: 2.8 kg, Suitable for nominal width: 400 mm, Width: 460 mm, Height: 460 mm, Depth: 220 mm, Width with packaging: 460 mm, Height with packaging: 460 mm, Depth with packaging: 220 mm, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Potentiometer ST EC 010 Rated voltage 10 V, infinitely variableFeatures:Made in Germany quality, protection class IP 54 for safety in the homePotentiometer - for easy installationOutput signal 0-10 V. Rated voltage 10 V. Can be flush-mounted or surface-mounted. Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Potentiometer for controlling EC fans. Output voltage for ST EC 10 and ST EC 230 continuously adjustable between 0 - 10 V via rotary knob. ST EC 3 allows regulation of the output voltage via 3 stages: Stage 1 = 3 - 7 V adjustable, stage 2 = 5 - 9 V adjustable, stage 3 = 10 V, installation of the potentiometer is possible both in a flush-mounted box without housing (IP 44) and surface-mounted with the housing (IP 54). An additional switching contact on the ST EC 010 enables the connection of a controller enable, for example. ST EC 230 for connection to a 230 V power supply. ST EC 010 for connection to a 10 V power supply. ST EC 3 for connection to a power supply of 10 - 15 V.Artikel: ST EC 010, voltage type: direct current, rated voltage: 10 V, output signal: 0 V - 10 V, protection rating: IP 54, installation type: surface-mounted / flush-mounted, housing material: plastic, colour: pure white, similar to RAL 9010, weight: 0.135 kg, weight with packaging: 0.16 kg, width: 82 mm, height: 82 mm, depth: 65 mm, width with packaging: 95 mm, Height with packaging: 85 mm, Depth with packaging: 70 mm, Suitable for box ventilators: yes, Suitable for roof ventilators: yes, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Potentiometer ST EC 230 Rated voltage 230 V, infinitely variableFeatures:Made in Germany quality, protection class IP 54 for safety in the homePotentiometer - for easy installationOutput signal 0-10 V. Rated voltage 230 V. Can be flush-mounted or surface-mounted. Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Potentiometer for controlling EC fans. Output voltage for ST EC 10 and ST EC 230 continuously adjustable between 0 - 10 V via rotary knob. ST EC 3 allows regulation of the output voltage via 3 stages: Stage 1 = 3 - 7 V adjustable, stage 2 = 5 - 9 V adjustable, stage 3 = 10 V, installation of the potentiometer is possible both in a flush-mounted box without housing (IP 44) and surface-mounted with the housing (IP 54). An additional switching contact on the ST EC 010 enables the connection of a controller enable, for example. ST EC 230 for connection to a 230 V power supply. ST EC 010 for connection to a 10 V power supply. ST EC 3 for connection to a power supply of 10 - 15 V.Artikel: ST EC 230, voltage type: alternating current, rated voltage: 230 V, output signal: 0 V - 10 V, protection rating: IP 54, installation type: surface-mounted / flush-mounted, housing material: plastic, colour: pure white, similar to RAL 9010, weight: 0.165 kg, weight with packaging: 0.19 kg, width: 82 mm, height: 82 mm, depth: 65 mm, width with packaging: 107 mm, Height with packaging: 85 mm, Depth with packaging: 73 mm, Suitable for box ventilators: yes, Suitable for roof ventilators: yes, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Pitched roof plinth for mounting roof ventilators on tiled roofs. With sound and heat insulation made of abrasion-resistant and non-combustible mineral fibre boards. For use on tiled roofs only. Standard versions up to 30° roof pitch. Different plinth heights and designs for roof pitches greater than 30° available on request. Please specify tile type and roof pitch when ordering. Note: Pitched roof plinths are manufactured according to customer specifications. A return is therefore not possibleglich.Artikel: SDS 40, Version: up to 30° roof pitch, Material housing: sheet steel, galvanised, Weight: 38 kg, Weight with packaging: 39 kg, Suitable for nominal width: 400 mm, Width: 895 mm, Height: 290 mm, Depth: 955 mm, Width with packaging: 990 mm, Height with packaging: 990 mm, Depth with packaging: 850 mm, Suitable for box ventilators: no, Suitable for roof ventilators: yes, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no