Skip to main content Jump to search Skip to main navigation
✔ Fast delivery    ✔ Invoice purchase    ✔ Easy returns    ✔ Free technical support   ✔ Personalized quote creation    ✔ Custom orders upon request    ℹ Intelmann Homepage

Supply and exhaust air set for KG pipe Ø 100 mm: stainless steel intake tower/ filter basket/ 5 filters/ stainless steel discharge elbow

Product information "Supply and exhaust air set for KG pipe Ø 100 mm: stainless steel intake tower/ filter basket/ 5 filters/ stainless steel discharge elbow"

Supply air and exhaust air set for KG pipe: Stainless steel intake tower/ filter basket/ 5 filters/ stainless steel discharge elbow

Stainless steel intake tower for supply air and discharge elbow for exhaust air.

The diameter specification refers to the matching KG pipe.

The intake tower is supplied in two parts and consists of a smooth tube and a louvred bonnet.
The smooth duct and louvred bonnet are made of V2A stainless steel (220 grit polished).

Installation is quick and uncomplicated:

1. allow the soil pipe to protrude at least 30 cm - 40 cm above ground level.

2. cut off the sleeve (the thick end of the soil pipe).

3. place the smooth pipe or the discharge elbow over the soil pipe.

4 Insert the filter basket into the smooth pipe up to the stop bead of the intake tower.

5. insert the louvre cover into the smooth pipe.

6. DONE!

The scope of delivery includes

1. 2-piece stainless steel intake tower with 1000 mm long trunk pipe

2. stainless steel filter basket incl. G3 filter, suitable for the intake tower

3. 5x replacement class G3 filters. For reasons of hygiene, the filters should be changed every 3 months, at the latest every 6 months.

4. stainless steel discharge elbow


Information on the louvred hood
Stainless steel design, louvred bonnet for outside, fresh and exhaust air with inserted bird protection grille.

Volume flow rate:

  • AT2A-S160 = 430 m³/h
  • AT2A-S200 = 690 m³/h
  • AT2A-S250 = 1000 m³/h
  • AT2A-S315 = 1600 m³/h

Note: When the exhaust air system is at a standstill, moisture, snow or dust can enter the pipe system. In order to prevent moisture from being sucked in with outside air intake, the air velocity in the free cross-section must not exceed 2 m/s.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Intelmann GmbH
Rudolf-Diesel-Straße 10
27383 Scheeßel, Deutschland

Angaben zur verantwortlichen Person in der EU (Informationspflichten zur GPSR Produktsicherheitsverordnung)
Intelmann GmbH
Rudolf-Diesel-Straße 10
27383 Scheeßel, Deutschland

W001-Allgemeines-Warnzeichen

Allgemeines Warnzeichen

Stellen Sie sicher, dass der Arbeitsplatz sicher eingerichtet ist und alle erforderlichen Sicherheitsvorkehrungen getroffen wurden. Vermeiden Sie den Zugang unbefugter Personen zur Baustelle. Stellen Sie sicher, dass im Notfall angemessene Erste-Hilfe-Ausrüstung und Kommunikationsmittel verfügbar sind.

W024-Warnung-vor-Handverletzungen

Warnung vor Handverletzungen

Verletzungsgefahr an scharfen Kanten und Blechteilen! – Beim Transport und Einbau Schutzhandschuhe tragen.

W008 Warnung vor Absturzgefahr

Warnung vor Absturzgefahr

Die Installation von Lüftungssystemen in großer Höhe und auf Gerüsten birgt erhebliche Risiken, darunter die Gefahr von Abstürzen, die zu schwerwiegenden Verletzungen oder sogar tödlichen Unfällen führen können.