Stainless steel weather protection grille Ø 150 mm square bonnet
€22.65
Available immediately, delivery time: 1-3 working days
Product information "Stainless steel weather protection grille Ø 150 mm square bonnet"
- Weather protection grille Ø 100 mm to Ø 150 mm type WSHE
- Stainless steel V2A
- Design weather protection grille for outside, weatherproof
- With self-closing flap, damped flap stop, no rattling due to metal on metal
- With rubber sealing tape for perfect connection to external façade, screws for installation included in scope of delivery
- Round connection on the back for connecting a ventilation pipe or hose
Installation:
Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience.
Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.
Allgemeines Warnzeichen
Warnung vor Handverletzungen
Warnung vor Absturzgefahr
Customers also bought
Slide-in backflow flap / internal non-return flap Nominal width 100 mm to 200 mm Opens smoothly, low pressure loss Closes securely, no noise, no rattling The damper is inserted into the ventilation duct For vertical and horizontal installation Housing: Galvanised steel Damper blade: Aluminium Shaft and spring: Stainless steel The non-return damper is used in round ventilation ducts to prevent air backflow. The casing is made of galvanised sheet steel. The damper blades are made of aluminium, the shaft and spring are made of stainless steel. The internal rubber seal reduces noise. The outer foam strip provides a good seal and secures the non-return flap in the pipe. The non-return damper is designed for operation at ambient temperatures up to 60°C, for the transport of clean air, free of coarse dust, grease, chemical vapours and other impurities.
Pre-laminating tape 4 mm x 12 mm Length: 10m / 20m Colour: Grey without firmly laminated silicone film Material: closed-cell polyethylene foam Self-adhesive on one side Temperature resistance: from - 30 to + 80 °C fulfils the hygienic requirements for use in air conditioning systems in accordance with VDI 6022 Reduction of noise transmission Motion damping Condensation water resistance: very good Versatile sealing and sealing tape/ suitable for a wide range of industrial and construction applications