Stainless steel intake tower set: 2-part intake tower Ø 110 mm + cone filter basket + 5 filters
€355.68
Available immediately, delivery time: 1-3 working days
Product information "Stainless steel intake tower set: 2-part intake tower Ø 110 mm + cone filter basket + 5 filters"
INTAKE TOWER MADE OF POLISHED STAINLESS STEEL
- Sturdy and durable construction made of solid, high-quality stainless steel
- Corrosion-resistant and robust
- Stainless steel V2A
- Finishing: polished surface (220 grit)
- UV and weather resistant
- Easy to clean
- Intelmann quality product
TECHNICAL DATA
- KG pipe (orange)
- KG2000 (green)
- HT pipe (grey)
- POLO-KAL (blue).
- Allow the soil pipe to protrude at least 30 cm - 40 cm above ground level.
- Cut off the sleeve (the thick end of the soil pipe)
- Place the smooth pipe over the soil pipe
- Insert the louvre cap into the smooth pipe
- DONE!
- AT2A-S100 / AT2A-S100-500 = 175 m³/h
- AT2A-S110 / AT2A-S110-500 = 270 m³/h
- AT2A-S125 / AT2A-S125-500 = 270 m³/h
- AT2A-S160 / AT2A-S160-500 = 430 m³/h
- AT2A-S200 / AT2A-S200-500 = 690 m³/h
- AT2A-S250 / AT2A-S250-500 = 1000 m³/h
- AT2A-S315 / AT2A-S315-500 = 1600 m³/h
Allgemeines Warnzeichen
Warnung vor Handverletzungen
Warnung vor Absturzgefahr
Customers also bought
5 filters / replacement filter class G3 for Intelmann intake towerCylindrical replacement filter for the Intelmann intake tower The filter basket is NOT included in the scope of delivery!
Contents: 5 Stück (€9.23 / 1 Stück)
MEZ-PLAST 580, 310 ml cartridge, silver-grey Sealing compound for sealing air duct systems and technical installations without silicone an alternative to soldering very good adhesion to all metals Fast curing sealant High chemical resistance Product properties: good adhesion to greasy, oily substrates and all metals Permanently elastic resistant to ageing, weathering and UV radiation antibacterial and fungicidal (against fungal attack) toxicologically harmless Resistant to many chemicals fulfils the hygienic requirements for use in for use in clean rooms and the specifications of the VDI 6022 guideline. can be used on lightly oiled, corrosion-preserved metals without degreasing without silicone, without nitrogen CFC-free no AOX components no lead compounds no mercury compounds no chromium compounds MEZ-PLAST is lead- and chromate-free and therefore food-safe according to the law Technical data Raw material base: acrylic resin, solvent-curing Curing time: approx. 4 mm in the first 24 h at +23°C and 50% r.F. Temperature resistance: - 40°C to +80°C (permanent) - 40°C to +100°C max. 1 h Processing temperature: +2°C to +60°C Shore A hardness: 38 Density: 1.05 g/m3 Primer: no Skin formation time: 10 min. at 23°C and 50% r.F. Coating compatibility: yes, preliminary tests required Paintability: yes, preliminary tests required Shelf life: 12 months Storage: protect from frost Flash point: below +21°C /- 4°C Hazard class: A1 Area of application: Sticks and adheres to all metals for sealing in ventilation ducts and plant construction Bonding and sealing in clean rooms, chip production, etc. Notes: - MEZ-PLAST is ready to use and can be applied without pre-cleaning and degreasing the areas to be sealed using a brush, - spatula or spraying equipment. - can be painted over after curing - A slight shrinkage may occur due to evaporation of the solvents contained.
MEZ-PLAST 590 SMP, 300 ml cartridge, grey MEZ-PLAST 590 SMP is an elastic, fast-setting one-component sealant for HVAC applications, tested in accordance with DIN EN ISO 846.Application: Suitable for HVAC systems in accordance with VDI 6022 / EN 15780, as well as for grease exhaust air and clean rooms. With EC 1 Plus classification, MEZ-PLAST SMP fulfils the highest requirements for sustainable construction. Complies with DGNB 2018.Properties:Fungicidal and bactericidalNon-corrosiveQuickly tack-free surfaceFree from silicone and isocyanateVery low shrinkageGood weathering & ageing resistanceSolvent-freeSkin formation: Approx. 15 - 20 min.Curing: 3 - 4 mm on the 1st dayProcessing temperature: +5°C to +35°CTemperature resistance: -40°C to +90°CShelf life: 12 monthsREACH regulationSVHC ≤ 0.1 %MEZ-PLAST 590 SMP does not contain any substances of very high concern above 0.1%. PRODUCT HIGHLIGHTS: Low emission Silicone-free Free from solvents & isocyanateHigh temperature resistance
Stainless steel pipe clampsApplicationFor fastening spiral ductsYour advantagesSuitable clamping ranges for all spiral ducts (standard)Catch lock: quick and easy insertion and fastening of the pipe thanks to the catch lock up to a nominal pipe diameter of 450 mm, from a nominal pipe diameter of 500 mm with M8 hexagon head screwEasy installation of the ventilation clamp thanks to the wide opening angle of the pipe clampStiffening of the ventilation clamp due to bead geometryEasy engagement of the screw plug with a fingertipHigh level of safety due to edge-locking suspension openingNo uncontrolled opening after engaging thanks to safety catch lockThe easy-to-engage lock allows the pipe clamp to be opened and closed with just one handWith highly elastic DÄMMGULAST® sound insulation insert: average sound level improvement of 18 dB(A)M8 threaded connections customised to the applicationThis product has been awarded the "pipe fastening quality mark" and is subject to external monitoring in accordance with RAL-GZ 655-B