Flat duct moulded connector (socket) 300 mm

Flat trunking made of galvanised sheet steel Width: 100 to 300 mm, height: 50 mm The width and height specifications refer to the internal dimensions of the trunking The total length of the trunking is L = 1000 mm The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this. The flat duct is suitable for a wide range of applications. These range from supply and exhaust air ducts for controlled (domestic) ventilation to use as an exhaust air duct for an extractor bonnet in the kitchen and as a supply air duct for fireplaces or stoves. The duct is suitable for installation under the screed. We recommend our version with internal reinforcement for this purpose. To seal the joints, we recommend our aluminium adhesive tape or aluminium-laminated cold-shrink tape. Both options offer sufficient protection against pressure loss in your pipework system. Flat duct system for controlled domestic ventilation or extractor hoods, 50 mm height. Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible to DIN 4102 class A1 On request: Special parts / dimensions, different heights, also stainless steel V2A (1.4301) and V4A (1.4404) and aluminium

Horizontal flat duct bend made of galvanised sheet steel. Area of application: Flat duct bends are used as connecting elements in supply and exhaust air ducts for controlled domestic ventilation. They can also be used in exhaust air ducts for extractor bonnets in the kitchen or as part of a supply air duct for fireplaces and stoves. We recommend using our aluminium adhesive tape or aluminium-laminated cold-shrink tape to seal the joints. Both options offer sufficient protection against pressure loss in your duct system. The Intelmann flat duct system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this.

Flat trunking nipple connector made of galvanised sheet steel For direct connection of duct to duct Flat duct system for controlled domestic ventilation or extractor fans 50 mm height Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible according to DIN 4102 class A1 Insertion depth per side 40 mm. On request: Special parts / dimensions, different heights, also in stainless steel 1.4301 and 1.4571 and aluminium. The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this.

Connection piece for disc valve / deflector / elbow End piece From flat duct to spiral duct Socket according to EN1506, z.b. For direct connection of a disc valve Material: galvanised steel, non-combustible to DIN 4102 class A1 Flat duct system for plugging

Sealing Compound MEZ-PLAST 580 – 310 ml, silver greyThe Sealing Compound MEZ-PLAST 580 is a high-quality, permanently elastic sealant for reliable sealing of air duct systems and technical installations. It is ideally suited for use in ventilation duct construction, plant engineering, and hygienically sensitive areas.The sealant is based on acrylic resin (solvent-crosslinking) and impresses with very good adhesion to metals – even on slightly oily or corrosion-protected surfaces, without the need for prior degreasing.Advantages at a glance:✅ Silicone-free – No silicone residues✅ Very good adhesion – Also on slightly oily and metallic surfaces✅ Permanently elastic – For long-lasting seals✅ Fast curing – Efficient processing✅ Chemical resistant – Suitable for technical applications✅ VDI 6022 compliant – For hygienic requirements in ventilation systems✅ Food safe – Free from lead, chromium and harmful substancesProduct properties:✔ Adheres to all metals✔ Ageing, UV and weather resistant✔ Antibacterial and fungicidal (against fungal infestation)✔ Toxicologically safe✔ Paintable (pre-tests recommended)✔ CFC-free, no AOX components✔ Free from lead, mercury and chromium compoundsTechnical details:✔ Product name: MEZ-PLAST 580✔ Packaging: Cartridge 310 ml✔ Colour: Silver grey✔ Raw material base: Acrylic resin, solvent-crosslinking✔ Curing: approx. 4 mm / 24 h at +23 °C, 50 % r.H.✔ Skin formation time: approx. 10 minutes✔ Shore A hardness: 38✔ Density: approx. 1.05 g/cm³✔ Temperature resistance:– permanent: −40 °C to +80 °C– short-term: up to +100 °C (max. 1 h)✔ Processing temperature: +2 °C to +60 °C✔ Shelf life: approx. 12 months✔ Storage: store frost-freeAssembly & processing:– Ready to use, no mixing required– Application with brush, spatula or spray equipment– Also suitable for slightly oily substrates– Overpaintable after complete curing– Slight material shrinkage possibleAreas of application:– Sealing of ventilation ducts and air duct systems– Plant and apparatus construction– Cleanrooms and industrial applications (e.g. chip manufacturing)– Bonding and sealing of metal jointsThe Sealing Compound MEZ-PLAST 580 offers a powerful, versatile and hygienically safe solution for professional sealing in ventilation and plant engineering.

Sealing Compound MEZ-PLAST 590 SMP – 300 ml, silver greyThe Sealing Compound MEZ-PLAST 590 SMP is a high-quality, elastic and fast-curing one-component sealant for professional use in HVAC systems (Heating, Ventilation, and Air Conditioning). It meets the highest standards for hygiene, emission behaviour, and sustainability.Tested according to DIN EN ISO 846 and suitable for applications in accordance with VDI 6022 and EN 15780, this sealant is ideal for ventilation systems, clean rooms, and grease extraction systems.Advantages at a glance:✅ Suitable for HVAC systems – VDI 6022 / EN 15780 compliant✅ Low emissions (EC 1 Plus) – For sustainable construction (DGNB 2018)✅ Fast curing – Short waiting times✅ Durably elastic – For long-lasting seals✅ Fungicidal & bactericidal – Hygienically safe✅ Silicone-free, solvent-free & isocyanate-free✅ Non-corrosive – Suitable for metalProduct features:✔ Very low shrinkage✔ Good weather and ageing resistance✔ Fast skin formation✔ High temperature resistance✔ Toxicologically safeTechnical details:✔ Product name: MEZ-PLAST 590 SMP✔ Packaging: Cartridge 300 ml✔ Colour: Silver grey✔ System: 1-component SMP sealant✔ Skin formation: approx. 15–20 minutes✔ Curing depth: approx. 3–4 mm / 24 h✔ Processing temperature: +5 °C to +35 °C✔ Temperature resistance: −40 °C to +90 °C✔ Storage life: approx. 12 monthsStandards & Environment:✔ DIN EN ISO 846 – microbiological resistance✔ VDI 6022 / EN 15780 – hygiene in HVAC systems✔ EC 1 Plus – very low emissions✔ DGNB 2018 compliant – sustainable construction✔ REACH compliant – SVHC ≤ 0.1 %Application & areas of use:– Sealing in ventilation and air conditioning systems– HVAC systems– Clean rooms– Grease extraction systems– Plant and apparatus constructionWith the MEZ-PLAST 590 SMP sealing compound, you receive a powerful, hygienically safe, and environmentally friendly solution for professional sealing in sensitive ventilation and plant areas.

Intelmann® Insulation Mat / Insulation Mat, self-adhesive – Insulation thickness 13 / 19 / 25 mmThe Intelmann® insulation mat made of elastomeric soft foam (FEF) is the professional solution for thermal insulation, cold insulation and condensation prevention in ventilation, air conditioning and piping systems. Thanks to the closed-cell structure, it offers excellent insulation performance and reliably protects against energy loss and moisture ingress.The self-adhesive version allows for quick, clean and secure installation without additional adhesive. Due to its high flexibility, the insulation mat can be optimally adapted to different shapes and surfaces – ideal for pipes, ducts and technical equipment.With a very good thermal conductivity of 0.034 to 0.037 W/(m·K) as well as a high water vapour resistance (≥ 10,000 µ), the insulation mat ensures effective insulation and reliably prevents condensation formation. In addition, it meets the fire protection class B-s3, d0 and is self-extinguishing.Advantages at a glance:✅ Excellent insulation performance – Reduces heat loss and energy consumption✅ Self-adhesive – Fast and easy processing without additional glue✅ Closed-cell – Very good moisture and vapour barrier✅ Flexible & adaptable – Ideal for pipes, ducts and surfaces✅ Fire protection compliant – Class B-s3, d0, self-extinguishing✅ Hygienic – No bacterial or fungal growthTechnical details:✔ Product name: Intelmann® Insulation Mat / Insulation Mat✔ Material: Elastomeric soft foam (FEF)✔ Cell structure: Closed✔ Insulation thicknesses: 13 / 19 / 25 mm✔ Roll dimensions: • 13 mm: 10 m x 1 m • 19 mm: 7 m x 1 m • 25 mm: 5 m x 1 m✔ Colour: Black / Anthracite✔ Temperature range: -50 °C to +85 °C✔ Thermal conductivity: 0.034 – 0.037 W/(m·K)✔ Water vapour resistance: ≥ 10,000 µ✔ Fire protection class: B-s3, d0✔ Fire behaviour: Self-extinguishing, no droplets, no flame spreadTypical areas of application:The insulation mat is ideal for insulating ventilation ducts, pipelines, air conditioning and refrigeration systems. It reduces heat loss, prevents condensation and improves the energy efficiency of technical systems. It is also used in plant construction and industrial applications for thermal and acoustic insulation.Installation instructions:For optimal adhesion, the surface should be clean, dry and free of grease. The mat is cut to size, the protective film removed and then pressed down evenly. Overlaps and joints can be additionally sealed with suitable adhesive tape to ensure continuous insulation.With the Intelmann® insulation mat, you receive a powerful, durable and installation-friendly solution for professional insulation and insulating work.

Reinforcement for flat duct for strengthening flat ducts Universal size b=70mm, a=49mm, L=910mm for flat ducts from b=140mm.

Self-tapping screws 4.2x13 mm with hexagon head and pressed-on washer, case-hardened galvanised steel, self-tapping DIN 7504 KThese screws are manufactured in galvanised steel. Self-tapping screws with 6KT head and pressed-on washer are characterised by their head shape (hexagon head with flange) and have a sheet metal thread. When you purchase a packaging unit of DIN 7504 K self-drilling screws, you receive 100 screws. Further important information about the article DIN 7504 Form K - Self-drilling screw with 6KT head with pressed-on washer : Weight per 100 pieces: 0.193 kg d: 4.2 mm; s: 7 mm; l: 13 mm; k: 4.1 mm; lp: 4.5 mm Self-drilling screws made of steel, electrogalvanised, high-quality industrial quality. Self-drilling screws for mounting sheet metal, ventilation ducts, flat ducts, fans, metal rails and car parts. The screws can be easily fastened with a cordless screwdriver without pre-drilling