Sealing compound, silver-grey, 310ml, MEZ-PLAST 580

MEZ-PLAST 580, 310 ml cartridge, silver-grey

Sealing compound for sealing air duct systems and technical installations

• without silicone
• an alternative to soldering
• very good adhesion to all metals
• Fast curing sealant
• High chemical resistance

Product properties:

• good adhesion to greasy, oily substrates and all metals
• Permanently elastic
• resistant to ageing, weathering and UV radiation
• antibacterial and fungicidal (against fungal attack)
• toxicologically harmless
• Resistant to many chemicals
• fulfils the hygienic requirements for use in
• for use in clean rooms and the specifications of the VDI 6022 guideline.
• can be used on lightly oiled, corrosion-preserved metals without degreasing
• without silicone, without nitrogen
• CFC-free
• no AOX components
• no lead compounds
• no mercury compounds
• no chromium compounds
• MEZ-PLAST is lead- and chromate-free and therefore food-safe according to the law

Technical data

• Raw material base: acrylic resin, solvent-curing
• Curing time: approx. 4 mm in the first 24 h at +23°C and 50% r.F.
• Temperature resistance: - 40°C to +80°C (permanent) - 40°C to +100°C max. 1 h
• Processing temperature: +2°C to +60°C
• Shore A hardness: 38
• Density: 1.05 g/m3
• Primer: no
• Skin formation time: 10 min. at 23°C and 50% r.F.
• Coating compatibility: yes, preliminary tests required
• Paintability: yes, preliminary tests required
• Shelf life: 12 months
• Storage: protect from frost
• Flash point: below +21°C /- 4°C
• Hazard class: A1

Area of application:

• Sticks and adheres to all metals
• for sealing in ventilation ducts and plant construction
• Bonding and sealing in clean rooms, chip production, etc.

Notes:

- MEZ-PLAST is ready to use and can be applied without pre-cleaning and degreasing the areas to be sealed using a brush,

- spatula or spraying equipment.

- can be painted over after curing

- A slight shrinkage may occur due to evaporation of the solvents contained.