Maico final assembly set PPB 30 O 0095.0245
€375.81
Delivery time: 2-5 working days
Product information "Maico final assembly set PPB 30 O 0095.0245"
Features:
- Made in Germany quality, protection class IP X4 for safety in the bathroom
- For a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mould
- Device is a good addition to a centralised control system. Designed for exhaust air rooms. Consists of 2 fans and 2 ceramic heat exchangers. Electrical connection via plug connection. Integrated condensate drip edge
- Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style
- Suitable for continuous operation.
Description:
Special features: The PPB 30 O device is a perfect alternative to ensure cost-effective ventilation of the bathroom with heat recovery. A low-cost solution for the bathroom could be the combination of 1 x PPB 30 O + 1 x RLS 45 O. (Attention: The room air control has protection class IP 00). Exhaust air operation of 45 m3/h (without heat recovery and without volume flow equalisation) can also be implemented. The PPB 30 O units are primarily designed for installation in extract air rooms. The IP X4 protection rating facilitates the choice of installation location in the bathroom. The energy efficiency of the PPB 30 O is impressive with an SPI value of 0.19 Wh/m3. Thanks to the energy-saving motors and very good sensor-controlled operation, the devices achieve energy efficiency class A. The PPB 30 O device can be operated in 5 ventilation levels 5/12/18/22/26 m3/h and 2 operating modes: continuous ventilation with heat recovery, cross ventilation without heat recovery. Flow-optimised external covers in the accessories range keep the exhaust air away from the external facade. Final assembly set for the PushPull Balanced PPB 30 single-room ventilation unit with two fans, two ceramic heat exchangers, internal cover and two integrated ISO Coarse 45 % (G3) filters, so that the air is filtered in both directions. Required accessories: PP 45 RHK or PP 45 RHL casing sleeve, PPB 30 AK, PPB 30 AE, PPB 30 AW or PPB 30 AS external cover, RLS 45 K or RLS 45 O room air control unit. With an RLS 45 K or RLS 45 O room air control unit, you can set up a wired ventilation system consisting of PPB 30 and PP 45 units. The maximum number of fans used is 6, so various combinations are possible. 3 x PPB 30 O + 1 x RLS 45 K or 3 x PPB 30 O + 1 x RLS 45 O. Optional accessories: Extension set PPB 30 VS, wall block PP 45 MB, equalising frame PPB 30 ARE and PPB 30 ARW, mounting plate PPB 30 ARE BB and PPB 30 ARW BB for equalising frame, humidity sensor PP 45 HYI and PP 45 HY, CO2 sensor PP 45 CO2, VOC sensor PP 45 VOC, air filter, replacement PPB 30 G3, approvals and certificates: Test report to EN 13141-8, entry in TZWL Bulletin. Heat exchanger: With the high-performance heat exchangers and the highly efficient EC fans, the appliances achieve a heat recovery efficiency of 73 % at the reference volume flow rate in accordance with EN 13141-8. Installation instructions: Installation is carried out in 2 steps: Installation of the PP 45 RHK (DN 160) or RHL (DN 160) casing sleeve and an external cover in a DN 160 core drill hole with an incline of 1-2 %. We recommend drilling the core hole with DN 182 and aligning the inclination of the sleeve using the polystyrene wedges supplied. The shell sleeve is protected from contamination with plaster covers. The final assembly set is then integrated. No pipe laying or adjustment of the system is necessary. Electrical connection: The appliance is supplied ready for operation. Electrical connection is by means of a plug connection. Connection to the RLS 45 K or RLS 45 O room air control system via plug-in control cables. The 12 VDC power cable from the RLS 45 K / RLS 45 O room air control unit to the appliance is also the control cable. Condensate drain: The condensate is drained via an integrated condensate drip edge in the outerenabdeckung.Artikel: PPB 30 O, Version: Object version, Delivery volume: 5 m3/h / 12 m3/h / 18 m3/h / 22 m3/h / 26 m3/h, Energy efficiency class: A, Rated voltage: 12 V DC, SPI value to DIN EN 13141-8: 0.19 Wh/m3, Maximum power consumption: 1.7 W / 2.5 W / 3.4 W / 4.4 W / 5.3 W, Protection rating: IP X4, Installation position: horizontal, System type: decentralised, Material: plastic, Housing material: plastic, Heat exchanger material: ceramic, Colour: traffic white, similar to RAL 9016, Weight: 4.626 kg, Weight with packaging: 5.7 kg, Filter type: external and exhaust air filter, Filter class: ISO Coarse 45 % (G3), Connection diameter: 160 mm, Width: 275 mm, Height: 275 mm, Depth: 410 mm, Width with packaging: 305 mm, Height with packaging: 325 mm, Depth with packaging: 490 mm, Required wall opening: 162 to 182 mm, Wall thickness: 320 mm / 500 mm, Heat recovery efficiency at reference volume flow according to DIN EN 13141-8: 73.3 %, Required room air control: RLS 45 K or RLS 45 O, Sound pressure level: 23 dB(A) / 35 dB(A) / 43 dB(A) / 48 dB(A) / 51 dB(A) / distance 1 m, Free field conditions, Weighted max. Element standard sound level difference Dn,w: 37 dB, Type of ventilation: decentralised supply and exhaust air, Heat recovery via: other, Heat recovery efficiency: 73.3 %
Warnung vor elektrischer Spannung
Allgemeines Warnzeichen
Matching accessories
External cover PPB 30 AK made of plastic, colour whiteFeatures:Quality Made in GermanyExternal cover - for easy installation and protection against dirt.External cover for the PPBP 30 K and PPBP 30 O final assembly sets. Louvres of the grille are flow-optimised to minimise air turbulence and keep out exhaust air. Discolouration and dirt deposits on the external façade are significantly minimised. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Suitable for continuous operation. Description:Plastic outer cover. Colour traffic white (similar to RAL 9016). The louvres of the grille are flow-optimised to minimise air turbulence and the exhaust air is kept away from the outer wall. This significantly minimises discolouration and dirt deposits on the external façade. An external cover is required as an accessory for the PPB 30 K and PPB 30 O final installation setstigt.Artikel: PPB 30 AK, Installation location: External wall, Installation position: Horizontal, Material: Plastic, Housing material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.85 kg, Weight with packaging: 1.058 kg, Width: 275 mm, Height: 275 mm, Depth: 65 mm, Width with packaging: 295 mm, Height with packaging: 320 mm, Depth with packaging: 87 mm
Slide-in adapter MF-WE63 transition flexible pipe - elbow, DN63Features:Quality Made in GermanySlide-in adapter - for quick and easy installation of 2 MF-F63 flexible pipes on MF-W/-WL..80/150 elbowsSlide-in adapter to create a precise transition from MF-F63 flexible pipe to MF-W/-WL..80/150 elbow. The flexible pipe is securely and quickly connected to the slide-in adapter using the "click principle". Inlusike a plug. Two MF-FDR sealing rings are required.Attractive design - compatible with any interior style Suitable for continuous operation. Description:The slide-in adapter is required to create a precise transition from the MF-F flexible pipe to the MF-W or MF-WL elbow. The MF-F flexible pipe is quickly and securely connected to the slide-in adapter using the click principle. Scope of delivery: Slide-in adapter incl. a plug. Required accessories: Two sealing rings MF-FDR.Artikel: MF-WE63, Air direction: Ventilation, Material: Polypropylene (PP), Plastic specifications: PVC-free, Weight: 0.1 kg, Weight with packaging: 0.1 kg, Nominal diameter: 63 mm, Width: 149.5 mm, Height: 79.5 mm, Depth: 62.5 mm, Width with packaging: 149.5 mm, Height with packaging: 79.5 mm, Depth with packaging: 62.5 mm
Body shell sleeve PP 45 RHK short sleeve, 500 mmFeatures:Quality Made in GermanyBody shell sleeves - for easy installation. Body shell sleeve available in two different sizes. The scope of delivery includes 1 x shell sleeve and 1 x installation material. 500 mm length.Attractive design - compatible with any interior style Suitable for continuous operation. Description:Necessary accessories for the PP 45 K, PP 45 O, PP 45 RC, PPB 30 K and PPB 30 O final assembly sets. Available in two different lengths: PP 45 RHK with a length of 500 mm and PP 45 RHL with a length of 800 mm. Scope of delivery: 1 x shell sleeve, 1 x Montagematerial.Artikel: PP 45 RHK, Installation location: External wall, Material: Plastic, Colour: Grey, Weight: 1.244 kg, Weight with packaging: 1.368 kg, Nominal width: 160 mm, Length: 500 mm, Width: 160 mm, Height: 160 mm, Depth: 500 mm, Width with packaging: 165 mm, Height with packaging: 165 mm, Depth with packaging: 510 mm, Required core drill hole: 182 mm
RLS 45 K room air control unit for up to 6 PushPull 45 K devicesFeatures:Quality Made in GermanyRoom air control - for simple control. Has 5 different ventilation levels as well as 3 operating programmes and a sensor-guided auto mode. Can be extended with a humidity sensor or an external sensor. Up to six devices can be connected. Safety shutdown and configuration with PC/laptop. Programmes: Continuous ventilation with heat recovery, cross ventilation without heat recovery and sensor-guided auto mode. Time limit switch-off and intensive ventilationAttractive design - Neutral white similar to RAL 9016, compatible with any interior style Suitable for continuous operation. Description:Special features: 5 ventilation levels PP45-15/20/30/36/42m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto mode can be selected with the control unit. Continuous ventilation mode with heat recovery: PushPull operation. The devices run alternately and change direction every 60 seconds. Cross ventilation operating mode: One device is permanently in supply air mode and the corresponding device is in extract air mode (z.B. for summer night cooling). In automatic mode, the delivery volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 K room air control system can be expanded with the internal humidity sensor or with the external sensors (humidity, CO2, VOC). The delivery volume is adjusted and the devices achieve energy efficiency class A+. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of appliances. Time-limited intensive ventilation (shock ventilation) or time-limited switch-off (sleep function) can also be selected at the touch of a button. The RLS 45 K room air control unit enables communication between exhaust air units (z.B. ECA/ER) and PushPull units. D.h. When an extract air fan starts up, the PushPull units switch to supply air mode to compensate for the resulting negative pressure. Supply air operation is possible with a run-on time of 0.6 or 15 minutes. The number of connected devices is also taken into account. The control unit has a separate 230 V input whose function can be defined in the software. The following functions are available for selection: Safety shutdown, sleep function, shock ventilation, supply air function for the exhaust air units with 0s, 6min or 15min overrun. ModBus connection is possible. In addition, the RLS 45 K room air control unit offers the option of conveniently configuring the device with a PC/laptop (Windows) using the commissioning software. Simple, time-saving digital commissioning and creation of digital commissioning protocols and recovery files. In combination with the EnOcean extension module PP 45 EO, the RLS 45 K room air control unit offers the unique possibility of connecting the wired PP 45 K and PP 45 O and the PP 45 RC radio devices with each other. With this control combination, it is therefore possible to z.B. wired devices can be installed on the ground floor and radio devices on the first floor. The entire system is controlled at the touch of a button. The control system can be expanded with additional PP45 LT control units or power packs. The room air control unit is required as an accessory for the PP 45 K, PP 45 O or PPB 30 K, PPB 30 O final assembly sets. For the PP 45 RC range of appliances, the RLS45 K wired control unit can be used as an option instead of the DS 45 RC wireless switch. The combination of RLS 45 K with the EnOcean extension module PP 45 EO is then required. Up to 6 fans can be controlled simultaneously via an RLS 45 K room air control unit, z.B. 6 x PP 45 devices or 4 x PP 45 devices + 1 x PPB 30 or up to 3 x PPB 30 deviceste.Artikel: RLS 45 K, Rated voltage: 230 V, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Flush-mounted, Material: Plastic, Colour: pure white, similar to RAL 9010, Weight: 0.112 kg, Weight with packaging: 0.341 kg, Width: 80 mm, Height: 80 mm, Depth: 49 mm, Width with packaging: 81 mm, Height with packaging: 81 mm, Depth with packaging: 50 mm
Air filter, PPB 30 G3 2 x (G3), for PPB 30 K and PPB 30 OFeatures:Quality Made in GermanyReplacement air filter - for easy installation.For PushPull Balanced PPB 30 single-room ventilation unit, installation on the inside.Attractive design - compatible with any interior style Suitable for continuous operation. Description:Replacement air filter set for PushPull Balanced PPB 30 single-room ventilation unit, Installation innenseitig.Artikel: PPB 30 G3, Material: Synthetic, Colour: White, Weight: 0.004 kg, Weight with packaging: 0.008 kg, Filter type: Coarse filter, Filter class: ISO Coarse 45 % (G3), Width: 210 mm, Height: 30 mm, Depth: 50 mm, Width with packaging: 211 mm, Height with packaging: 35 mm, Depth with packaging: 55 mm