Weather protection grille for flat duct 100 mm, angular connection
€37.75
Available immediately, delivery time: 1-3 working days
Product information "Weather protection grille for flat duct 100 mm, angular connection"
- Weather protection grille for flat duct
- Rear, angular connection for direct connection to flat duct
- With bird and fly screen
- Material: galvanised steel
Allgemeines Warnzeichen
Warnung vor Handverletzungen
Warnung vor Absturzgefahr
Customers also bought
Flat trunking made of galvanised sheet steel Width: 100 to 300 mm, height: 50 mm The width and height specifications refer to the internal dimensions of the trunking The total length of the trunking is L = 1000 mm The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this. The flat duct is suitable for a wide range of applications. These range from supply and exhaust air ducts for controlled (domestic) ventilation to use as an exhaust air duct for an extractor bonnet in the kitchen and as a supply air duct for fireplaces or stoves. The duct is suitable for installation under the screed. We recommend our version with internal reinforcement for this purpose. To seal the joints, we recommend our aluminium adhesive tape or aluminium-laminated cold-shrink tape. Both options offer sufficient protection against pressure loss in your pipework system. Flat duct system for controlled domestic ventilation or extractor hoods, 50 mm height. Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible to DIN 4102 class A1 On request: Special parts / dimensions, different heights, also stainless steel V2A (1.4301) and V4A (1.4404) and aluminium
Pre-laminating tape 4 mm x 12 mm Length: 10m / 20m Colour: Grey without firmly laminated silicone film Material: closed-cell polyethylene foam Self-adhesive on one side Temperature resistance: from - 30 to + 80 °C fulfils the hygienic requirements for use in air conditioning systems in accordance with VDI 6022 Reduction of noise transmission Motion damping Condensation water resistance: very good Versatile sealing and sealing tape/ suitable for a wide range of industrial and construction applications
The spray is suitable for re-galvanising and repairing damaged areas on galvanised parts, welds and interfaces in steel construction and the hobby sector. It takes on the task of corrosion protection and, due to its colour similarity with freshly galvanised materials, creates an optical balance. Gebhardt-Stahl Zink-Alu-Spray is a quick-drying anti-corrosion coating based on selected binders with a very high solids content. Fast drying High coverage, therefore economical to use Suitable substrates are steel, cast iron, aluminium, zinc and many more.
Self-tapping screws 4.2x13 mm with hexagon head and pressed-on washer, case-hardened galvanised steel, self-tapping DIN 7504 KThese screws are manufactured in galvanised steel. Self-tapping screws with 6KT head and pressed-on washer are characterised by their head shape (hexagon head with flange) and have a sheet metal thread. When you purchase a packaging unit of DIN 7504 K self-drilling screws, you receive 100 screws. Further important information about the article DIN 7504 Form K - Self-drilling screw with 6KT head with pressed-on washer : Weight per 100 pieces: 0.193 kg d: 4.2 mm; s: 7 mm; l: 13 mm; k: 4.1 mm; lp: 4.5 mm Self-drilling screws made of steel, electrogalvanised, high-quality industrial quality. Self-drilling screws for mounting sheet metal, ventilation ducts, flat ducts, fans, metal rails and car parts. The screws can be easily fastened with a cordless screwdriver without pre-drilling