Frost-proof outdoor tap Whether for gardens, parks, stables, sports grounds or playgrounds - with the frost-proof ARCTIC GARDEN standpipe valves, your outdoor water supply is guaranteed all year round. You also avoid unpleasant and expensive frost damage to your pipes, as frost in water pipes can cause very serious damage. The innovative taps adapt to any environment and their modern technology prevents the tap from freezing. This means that your water supply is guaranteed all year round. They also prevent the pipes from being damaged by frost. Arctic Garden G500: Frost-proof pillar valve Outlet length: 105 mm Stem pipe length: 1400 mm Trunk pipe diameter: ø 22 mm LG = long handle | LGL = lockable long handle | RG = round handle Water withdrawal: also possible during the frost period, as the tap is completely emptied in the CLOSED position Tap jet and flow rate: Can be changed by using different aerators Operation: Wear-free thanks to the use of ceramic discs in frost-proof soil Backflow preventer: in the water inlet Maximum water pressure: 10 bar Main pipe connection: ¾ inch Tap outlet: ¾ inch E X P E R I E N C E-------------------------We hereby declare that all metallic materials used in the fittings of the Arctic range comply with the latest positive list of the German Federal Environment Agency (assessment basis for metallic materials in contact with drinking water) and that the seals used are approved in accordance with DVGW W270 and therefore fulfil the drinking water requirements.When connecting the fitting to the drinking water network, the installation may only be carried out by a licenced specialist company in accordance with DIN 1988 / DIN EN 1717 / EN 806 and must comply with local, national and international standards and regulations.

Frost-proof outdoor tap Whether for gardens, parks, stables, sports grounds or playgrounds - with the frost-proof ARCTIC GARDEN standpipe valves, your outdoor water supply is guaranteed all year round. You also avoid unpleasant and expensive frost damage to your pipes, as frost in water pipes can cause very serious damage. The innovative taps adapt to any environment and their modern technology prevents the tap from freezing. This means that your water supply is guaranteed all year round. They also prevent the pipes from being damaged by frost. Arctic Garden G500: Frost-proof pillar valve Outlet length: 105 mm Stem pipe length: 1400 mm Trunk pipe diameter: ø 22 mm LG = long handle | LGL = lockable long handle | RG = round handle Water withdrawal: also possible during the frost period, as the tap is completely emptied in the CLOSED position Tap jet and flow rate: Can be changed by using different aerators Operation: Wear-free thanks to the use of ceramic discs in frost-proof soil Backflow preventer: in the water inlet Maximum water pressure: 10 bar Main pipe connection: ¾ inch Tap outlet: ¾ inch E X P E R I E N C E-------------------------We hereby declare that all metallic materials used in the fittings of the Arctic range comply with the latest positive list of the German Federal Environment Agency (assessment basis for metallic materials in contact with drinking water) and that the seals used are approved in accordance with DVGW W270 and therefore fulfil the drinking water requirements.When connecting the fitting to the drinking water network, the installation may only be carried out by a licenced specialist company in accordance with DIN 1988 / DIN EN 1717 / EN 806 and must comply with local, national and international standards and regulations.

Frost-proof outdoor tap Whether for gardens, parks, stables, sports grounds or playgrounds - with the frost-proof ARCTIC GARDEN standpipe valves, your outdoor water supply is guaranteed all year round. You also avoid unpleasant and expensive frost damage to your pipes, as frost in water pipes can cause very serious damage. The innovative taps adapt to any environment and their modern technology prevents the tap from freezing. This means that your water supply is guaranteed all year round. They also prevent the pipes from being damaged by frost. Arctic Garden G500: Frost-proof pillar valve Outlet length: 105 mm Stem pipe length: 1400 mm Trunk pipe diameter: ø 22 mm LG = long handle | LGL = lockable long handle | RG = round handle Water withdrawal: also possible during the frost period, as the tap is completely emptied in the CLOSED position Tap jet and flow rate: Can be changed by using different aerators Operation: Wear-free thanks to the use of ceramic discs in frost-proof soil Backflow preventer: in the water inlet Maximum water pressure: 10 bar Main pipe connection: ¾ inch Tap outlet: ¾ inch E X P E R I E N C E-------------------------We hereby declare that all metallic materials used in the fittings of the Arctic range comply with the latest positive list of the German Federal Environment Agency (assessment basis for metallic materials in contact with drinking water) and that the seals used are approved in accordance with DVGW W270 and therefore fulfil the drinking water requirements.When connecting the fitting to the drinking water network, the installation may only be carried out by a licenced specialist company in accordance with DIN 1988 / DIN EN 1717 / EN 806 and must comply with local, national and international standards and regulations.

Stainless steel drip tray for Arctic Garden and Arctic Park variantsPrevents the substrate under the outlet area of the pillar valves from being washed outVisual enhancement of the frost-proof pillar valvesDimensions:300 x 300 x 40 mmNotes on installation:► TWO rubber pipe sleeves are included in the scope of delivery.The thicker sleeve is suitable for fitting the pan tray to an Arctic Garden pillar valve, the thinner one for the Arctic Park versions.► The drip tray can FURTHER be positioned slightly higher on the pillar valve to ensure sufficient clearance for installation.► As long as the screws are not tightened, the drip tray can still be pushed to the desired height.The rubber pipe collar is placed around the standpipe, the retaining plate is PLACED from the inside into the drip tray in front of the TWO through-holes and lightly screwed to the standpipe using the clamp and the two screws.► The drip tray can now be moved and installed at ground level.► To finish the installation, tighten the screws