Centrifugal tube fan ERR 10/1 S AC, DN100, heavy-duty designFeatures:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection pieces on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 10/1 S, Delivery volume: 250 m3/h, Speed: 2518 1/min, Impeller type: radial, Speed controllable: yes, Reversible: no, Energy efficiency class: F, Voltage type: Alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 51 W, IMax: 0.23 A, Protection rating: IP X4, Thermal class: B, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 2.84 kg, Weight with packaging: 3.41 kg, Nominal diameter: 100 mm, Width: 254 mm, Height: 291 mm, Depth: 230 mm, Width with packaging: 310 mm, Height with packaging: 310 mm, Depth with packaging: 270 mm, Fluid temperature at rated current: 60 °C, Fluid temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 100XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 52.1 WCurrent 0.227 AMax. Volume flow 285 m³/hSpeed 2418 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 45.2 dB(A)Weight 3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option C ErP ready 2016, 2018 Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 100M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.9 WCurrent 0.171 AMax. Volume flow 184 m³/hSpeed 2443 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 38.4 dB(A)Weight 2.3 kgInsulation class, motor B Protection class, motor 44 IP Energy class, basic unit F Energy class, basic unit option D ErP ready 2016, 2018 Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 150M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 53.3 WCurrent 0.232 AMax. Volume flow 464 m³/hSpeed 2379 1/minMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 37.5 dB(A)Weight 3.3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option B Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 200M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 102 WCurrent 0.442 AMax. Volume flow 760 m³/hSpeed 2529 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 42.7 dB(A)Weight 4.1 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Centrifugal tube fan ERR 20/1 AC, DN200,Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 20/1, Delivery volume: 840 m3/h, Speed: 2611 1/min, Impeller type: radial, Speed controllable: yes, Reversible: no, Energy efficiency class: F, Voltage type: alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 116 W, IMax: 0.5 A, Protection class: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 4.4 kg, Weight with packaging: 5.275 kg, Nominal diameter: 200 mm, Width: 370 mm, Height: 407 mm, Depth: 230 mm, Width with packaging: 390 mm, Height with packaging: 390 mm, Depth with packaging: 300 mm, Pump temperature at rated current: -20 °C to 60 °C, Pump temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 125 EC Voltage 230 VFrequency 50 HzPhase 1 ~Power 83 WCurrent 0.678 AMax. Volume flow 482 m³/hSpeed 3308 1/minMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °CSound pressure level at 3m (20m² Sabine) 45.9 dB(A)Weight 2.8 kgInsulation class, motor B Protection class, motor 54 IP 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 200L sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 145 WCurrent 0.631 AMax. Volume flow 965 m³/hSpeed 2555 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 47.8 dB(A)Weight 4.8 kgInsulation class F Protection class, motor 44 IPCapacitor 3.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Centrifugal tube fan ERR 10/1 AC, DN100Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 10/1, delivery volume: 220 m3/h, speed: 2326 1/min, impeller type: radial, speed controllable: yes, reversible: no, SEC average: -10 kWh/(m2*a), voltage type: Alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 27 W, IMax: 0.13 A, Protection rating: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 2.82 kg, Weight with packaging: 3.4 kg, Nominal diameter: 100 mm, Width: 254 mm, Height: 291 mm, Depth: 230 mm, Width with packaging: 310 mm, Height with packaging: 310 mm, Depth with packaging: 270 mm, Fluid temperature at rated current: 60 °C, Fluid temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 125XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 52.7 WCurrent 0.229 AMax. Volume flow 359 m³/hSpeed 2395 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 41.7 dB(A)Weight 2.9 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 150XL sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 100 WCurrent 0.443 AMax. Volume flow 724 m³/hSpeed 2523 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 46.4 dB(A)Weight 4.1 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Centrifugal tube fan ERR 12/1 AC, DN125Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 12/1, delivery volume: 270 m3/h, speed: 2336 1/min, impeller type: radial, speed controllable: yes, reversible: no, SEC average: -10 kWh/(m2*a), voltage type: Alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 27 W, IMax: 0.13 A, Protection rating: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 2.75 kg, Weight with packaging: 3.15 kg, Nominal diameter: 125 mm, Width: 254 mm, Height: 291 mm, Depth: 230 mm, Width with packaging: 310 mm, Height with packaging: 310 mm, Depth with packaging: 270 mm, Pump temperature at rated current: -20 °C to 60 °C, Pump temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 160XL Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 102 WCurrent 0.447 AMax. Volume flow 749 m³/hSpeed 2539 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 46.4 dB(A)Weight 4 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Energy class, basic unit E Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Centrifugal tube fan ERR 25/1 AC, DN250Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 25/1, Delivery volume: 1060 m3/h, Speed: 2623 1/min, Impeller type: radial, Speed controllable: yes, Reversible: no, Voltage type: alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 148 W, IMax: 0.65 A, Protection rating: IP X4, Thermal class: B, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 5.64 kg, Weight with packaging: 6.5 kg, Nominal diameter: 250 mm, Width: 380 mm, Height: 417 mm, Depth: 230 mm, Width with packaging: 390 mm, Height with packaging: 390 mm, Depth with packaging: 300 mm, Conveying medium temperature at nominal current: -20 °C to 60 °C, Conveying medium temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 200EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 78.6 WCurrent 0.626 AMax. Volume flow 774 m³/hSpeed 2468 r.p.mSound pressure level at 3m (20m² Sabine) 51.4 dB(A)Weight 3.3 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Centrifugal tube fan ERR 16/1 S AC, DN160, heavy-duty designFeatures:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 16/1 S, Delivery volume: 720 m3/h, Speed: 2625 1/min, Impeller type: radial, Speed controllable: yes, Reversible: no, Energy efficiency class: F, Voltage type: alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 112 W, IMax: 0.5 A, Protection class: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 4.31 kg, Weight with packaging: 5.16 kg, Nominal diameter: 160 mm, Width: 250 mm, Height: 237 mm, Depth: 210 mm, Width with packaging: 390 mm, Height with packaging: 390 mm, Depth with packaging: 300 mm, Pump temperature at rated current: -20 °C to 60 °C, Pump temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair K 315M inline fan ErP ready ErP 2016/ErP 2018 Nominal dataVoltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 231 WCurrent 1.01 AMax. Volume flow 1224 m³/hSpeed 2783 1/minCapacitor 5 µFWeight 6.6 kgTemperature dataMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound dataSound pressure level at 3m (20m² Sabine) 42.7 dB(A)Protection class / classificationInsulation class F Protection class, motor IP44 IP Speed controllable Built-in thermal contacts Installation possible in any mounting position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan RVK-EX 315D4, ATEX Voltage 400 VFrequency 50 HzPhase 3 ~Electrical input power (P1) 84.4 WCurrent 0.2 AMax. Volume flow 1120 m³/hSpeed 1385 1/minMax. Pumped liquid temperature 40 °CMax. Max. fluid temperature with speed control 40 °CSound pressure level at 3m (20m² Sabine) 41.2 dB(A)Weight 7.1 kgInsulation class B Protection class, motor 44 IPCertificate ZELM 03AREX0198X Explosion protection II 2G c Ex e IIB T3 Tested in accordance with ATEX Directive 94-9-EG Reliable and easy to maintain Installation possible in any mounting position Type of protection Ex e" (increased safety) Motor protection via PTC thermistor (*PTC), in conjunction with a U-EK230E tripping device Voltage controllable external rotor motor with lead-out cable RVK fans are designed for installation in ducts. The housing is made of conductive plastic and the centrifugal impeller is fitted with backward curved blades. Combined with the Systemair U-EK230E motor protection relay, the speed of the RVK-EX 315D4 can be controlled via a 5-stage voltage regulator. They can be used for temperature classes T1, T2 and T3. It is also possible to convey explosive gases in zone 1 and zone 2, as well as groups IIA and IIB. The fans are certified under ZELM 03 ATEX 0198x. The motor of the RVK fans must be connected to a separate motor protection switchgear. * Positive Temperature Coefficient = PTC (thermistor)

Systemair tube fan K 160M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 53 WCurrent 0.231 AMax. Volume flow 450 m³/hSpeed 2388 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 37.8 dB(A)Weight 3.3 kgInsulation class B Protection class, motor 44 IPCapacitor 1.5 µF Energy class, basic unit E Energy class, basic unit option B Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 160 EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 79.4 WCurrent 0.628 AMax. Volume flow 544 m³/hSpeed 3105 r.p.mSound pressure level at 3m (20m² Sabine) 46.6 dB(A)Weight 3.3 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Centrifugal tube fan ERR 16/1 AC, DN160Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection spigots on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 16/1, delivery volume: 350 m3/h, speed: 2163 1/min, impeller type: radial, speed controllable: yes, reversible: no, SEC average: -11 kWh/(m2*a), voltage type: Alternating current, Rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 29 W, IMax: 0.14 A, Protection rating: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: Sheet steel, powder-coated, Housing material: Sheet steel, powder-coated, Colour: Light grey, Weight: 2.76 kg, Weight with packaging: 3.32 kg, Nominal diameter: 160 mm, Width: 250 mm, Height: 237 mm, Depth: 210 mm, Width with packaging: 310 mm, Height with packaging: 310 mm, Depth with packaging: 270 mm, Pump temperature at rated current: -20 °C to 60 °C, Pump temperature at IMax: -20 °C to 60 °C, DC motor: false

Systemair tube fan K 250L sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 145 WCurrent 0.632 AMax. Volume flow 979 m³/hSpeed 2562 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 43 dB(A)Weight 4.6 kgInsulation class F Protection class, motor 44 IPCapacitor 3.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair tube fan K 125M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.1 WCurrent 0.172 AMax. Volume flow 187 m³/hSpeed 2483 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 33.9 dB(A)Weight 2.3 kgInsulation class, motor B Protection class, motor 44 IPCapacitor None µF Energy class, basic unit F Energy class, basic unit option C Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Centrifugal tube fan ERR 31/1 AC, DN315Features:Made in Germany quality, super quiet, IP X4 protection rating for safety in the homeFor a better indoor climate in the home - the elegant solution against humidity, unpleasant odours and mouldRadial impeller with backward curved blades. Low noise and high pressure. Mounting foot available as an option. Speed controllable. Can be installed in any position. Electrical connection via external terminal box with cable entry grommet.Attractive design with elegant sheet steel - compatible with any interior style Suitable for continuous operation. Thermal overload protection. Energy-saving, robust motorDescription:Special features: Efficient centrifugal tube fan made of powder-coated sheet steel. Suitable for industrial and residential installations. Centrifugal impeller with backward curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipework, depending on installation position for aeration or ventilation. Round connection pieces on the suction and discharge side matched to standard pipes. Mounting foot available as an accessory. Direction of flow: Direction of flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically in the event of overheating. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure side. Installation instructions: Installation possible in any position. To prevent vibration transmission to the duct system, use optional ELR elastic collars. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the contact protection of the impeller is guaranteed in accordance with DIN EN ISO 13857. Optional protective grille SGR anbringen.Artikel: ERR 31/1, air volume: 1370 m3/h, speed: 2760 1/min, impeller type: radial, speed controllable: yes, reversible: no, voltage type: alternating current, rated voltage: 230 / 220 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 258 W, IMax: 1.14 A, Protection rating: IP X4, Pole-changing: no, Installation position: vertical / horizontal, Material: sheet steel, powder-coated, Material housing: Sheet steel, powder-coated, Colour: light grey, Weight: 6.46 kg, Weight with packaging: 7.615 kg, Nominal width: 315 mm, Width: 450 mm, Height: 487 mm, Depth: 295 mm, Width with packaging: 470 mm, Height with packaging: 470 mm, Depth with packaging: 360 mm, Fluid temperature at nominal current: -25 °C to 60 °C, Fluid temperature at IMax: -20 °C to 60 °C to at 60 Hz temperature -20 °C to 25 °C, DC motor: false

Systemair tube fan K 100 EC Voltage 230 VFrequency 50 HzPhase 1 ~Power 82.6 WCurrent 0.69 AMax. Volume flow 321 m³/hSpeed 3479 1/minMax. Max. fluid temperature 60 °CMax. Max. fluid temperature with speed control 60 °CSound pressure level at 3m (20m² Sabine) 49.8 dB(A)Weight 2.9 kgInsulation class, motor B Protection class, motor 54 IP 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 250 EC Voltage 230 V Frequency 50/60 Hz Phase 1 ~ Power 115 W Current 0.874 A Max. Volume flow 979 m³/h Speed 2562 r.p.m Sound pressure level at 3m (20m² Sabine) 39.4 dB(A) Weight 4.5 kg Insulation class, motor B Protection class, motor 54 IP Max. Max. fluid temperature 55 °C Max. Max. fluid temperature with speed control 55 °C Description - 100 % controllable - Integrated speed controller - Integrated motor protection - Low noise level - Installation in any mounting position - Mounting bracket included - Reliable and maintenance-free - Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range. However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact tube fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting collars available as accessories. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 315L EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 340 WCurrent 2.08 AMax. Volume flow 1732 m³/hSpeed 2719 r.p.mSound pressure level at 3m (20m² Sabine) 57.2 dB(A)Weight 7.2 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 55 °CMax. Max. fluid temperature with speed control 55 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.

Systemair tube fan K 250M sileo Voltage 230 VFrequency 50 HzPhase 1 ~Electrical input power (P1) 103 WCurrent 0.449 AMax. Volume flow 788 m³/hSpeed 2535 1/minMax. Pumped liquid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 41.3 dB(A)Weight 3.9 kgInsulation class F Protection class, motor 44 IPCapacitor 2.5 µF Speed controllable Built-in thermal contacts Can be installed in any position Can be used outdoors Reliable and maintenance-free The K series is suitable for duct mounting. For easy installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. The fan can be connected to the duct system without vibration using the FK connecting sleeves, which we offer as accessories. The fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. The fan has built-in thermal contacts to protect the motor from overheating. The airtight, folded housing is made of galvanised sheet steel. In accordance with EN 12237:2003, the fan has a leakage rate in accordance with tightness class C. The airtight housing allows the fan to be installed outdoors and in damp rooms.

Systemair plastic duct fan RVK sileo 100E2 Voltage 230 VFrequency 50 HzPhase 1 ~Power 29.1 WCurrent 0.171 AMax. Volume flow 184 m³/hSpeed 2482 r.p.mMax. Max. fluid temperature 70 °CMax. Max. fluid temperature with speed control 70 °CSound pressure level at 3m (20m² Sabine) 34.5 dB(A)Weight 1.8 kgInsulation class, motor B Protection class, motor 44 IP Speed controllable Built-in thermal contacts in accordance with EN 60335-2-80 Installation possible in any mounting position Mounting bracket included Reliable and maintenance-free Extensive range of accessories The RVK series is suitable for duct mounting. All fans are equipped with backward curved impeller blades and external rotor motors. The mounting bracket is included in the scope of delivery. It ensures easy installation and removal of the fan. With the FK connecting collars, which we offer as accessories, the fan can be connected to the pipework system without vibration. By reducing the voltage, the fans can be speed-controlled using a stepless thyristor or a 5-stage transformer. To protect the motor from overheating, the models have built-in thermal contacts that are automatically reset in accordance with EN 60335-2-80. The housing is made of plastic (propylene PP with 30% glass fibre content). We recommend including an overrun for installation in damp rooms.

Systemair tube fan K 315M EC Voltage 230 VFrequency 50/60 HzPhase 1 ~Power 166 WCurrent 1.14 AMax. Volume flow 1415 m³/hSpeed 2113 r.p.mSound pressure level at 3m (20m² Sabine) 49.7 dB(A)Weight 6 kgInsulation class, motor B Protection class, motor 44 IPMax. Max. fluid temperature 40 °CMax. Max. fluid temperature with speed control 40 °C 100 % controllable Integrated speed controller Integrated motor protection Low noise level Installation in any mounting position Mounting bracket included Reliable and maintenance-free Energy-efficient, economical and convenient EC fans are intelligent fans with integrated control (commutation unit), which always sets the fan to optimum operation. This means that the proportion of effectively utilised energy is many times higher compared to AC motors. At the same time, the energy input remains extremely low. The EC drive is more energy-efficient and therefore significantly more economical than AC motors, particularly in the controlled range.However, energy-saving fans from Systemair are not only extremely energy-efficient, but also pleasant, convenient and time-saving to install. As the control electronics are integrated into the motor, there is no need to connect to a control cabinet with power and control electronics and the associated wiring work. EC fans also have a longer service life than AC fans due to less wear and tear and lower heat generation and require less maintenance. The compact inline fans in the K-EC series are suitable for installation in pipe systems. For simple and safe installation, all K fans have at least 25 mm long pipe connections in accordance with EN 1506:1997. The fans are equipped with backward curved impeller blades and energy-saving, highly efficient EC external rotor motors. The mounting brackets are included in the scope of delivery. They ensure easy installation and removal of the fan. The fans are equipped with a potentiometer (0-10V) that can be used to set the operating point directly. The factory setting of the potentiometer is set to a value between 6-10V. To protect the motor from overheating, the fan has a built-in motor protection. The housing is made of galvanised sheet steel. K fans are particularly airtight and achieve tightness class C in accordance with EN 12237:2003. Due to the airtight housing, the terminal box in IP55 and the M20 cable gland in IP 68, installation outdoors and in damp rooms is permitted.