Plastic flat duct and moulded parts
Volume flow / air flow rate:
110 x 55 mm ≈ 250 m³/h
220 x 55 mm ≈ 600 m³/h
110 x 55 mm flat duct
Intelmann plastic air duct for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature-resistant up to 60 °CFormat: 55х110 mm or 55x220 mmLength: 1000 mm
Intelmann plastic connector for connecting flat ducts (sleeve) Not suitable for connecting moulded parts (bends, T-piece, deflection piece), please use moulded part connector FKNK for this.Made of white plastic and temperature resistant up to 60° CSize: 55х110 mm or 55x220 mmType: Duct connector / sleeve
Intelmann plastic connector for connecting moulded parts (nipples)For connecting: Bends, T-pieces, deflection pieces etc.Made of white plastic and temperature resistant up to 60 °CSize: 55х110 mm or 55x220 mmType: Moulded part connector / nipple
Intelmann plastic air duct bend 90° flat to round for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealant or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Bend 90° flat duct to round 100-125 mm
Intelmann plastic air duct bend 90° horizontal for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Horizontal 90° bend
Intelmann plastic air duct bend 90° vertical for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: 90° vertical bend
Intelmann plastic air duct bend 15° - 60° for cutting to size, horizontal for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealant or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110Type: Horizontal bend 15°-60°
Intelmann plastic air duct T-piece for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: T-piece
Intelmann plastic air duct brackets for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Plastic holder
Intelmann plastic flange for mounting flat ducts to a wall opening or similar.Made of white plastic and temperature resistant up to 60° CFormat: 55х110 mmType: FlangeMaterial: Plastic
Intelmann plastic air duct transition piece flat duct to pipe for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Flat duct on asymmetrical pipe 100-125 mm
Intelmann plastic reducer / connector for connecting flat ducts (sleeve)with different sizes. Made of white plastic and temperature resistant up to 60° CSize: 55х110 mm to 55x220 mmType: Duct connector / sleeve
220 x 55 mm flat duct
Intelmann plastic air duct for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature-resistant up to 60 °CFormat: 55х110 mm or 55x220 mmLength: 1000 mm
Intelmann plastic connector for connecting flat ducts (sleeve) Not suitable for connecting moulded parts (bends, T-piece, deflection piece), please use moulded part connector FKNK for this.Made of white plastic and temperature resistant up to 60° CSize: 55х110 mm or 55x220 mmType: Duct connector / sleeve
Intelmann plastic air duct bend 90° flat to round for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealant or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Bend 90° flat duct to round 100-125 mm
Intelmann plastic flange for mounting flat ducts to a wall opening or similar.Made of white plastic and temperature resistant up to 60° CFormat: 55х110 mm or 55x220 mmType: FlangeMaterial: Plastic
Intelmann plastic air duct bend 90° horizontal for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Horizontal 90° bend
Intelmann plastic air duct bend 90° vertical for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: 90° vertical bend
Intelmann plastic air duct T-piece for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: T-piece
Intelmann plastic connector for connecting moulded parts (nipples)For connecting: Bends, T-pieces, deflection pieces etc.Made of white plastic and temperature resistant up to 60 °CSize: 55х110 mm or 55x220 mmType: Moulded part connector / nipple
Intelmann plastic air duct brackets for the supply and exhaust air of rooms and extractor bonnets. The system is quick, easy and clean to install, without sealants or solvents.Made of white plastic and temperature resistant up to 60 °CFormat: 55х110 mm or 55x220 mmType: Plastic holder
Accessories
Plastic round duct / pipe: Ø 100 mm.Made of high-quality, white plastic that can withstand temperatures from -20°C to +65°C. Length: 1000 mm
The Intelmann universal reducer for ventilation systems in the following sizes: Ø 80 - 100 - 120 - 125 - 150 mmMade of high-quality, white plastic that can withstand temperatures from -20°C to +65°C.
Intelmann plastic flange for mounting flat ducts to a wall opening or similar.Made of white plastic and temperature resistant up to 60° CFormat: 55х110 mm to Ø 100 mm Type: Flange on roundMaterial: Plastic
Ideally suited for sealing, insulating and fastening plastic flat ductsFor duct, pipe and hose connectionsLength: 10 metresWidth: 50 millimetres