Weather protection grille Ø 100 mm to Ø 315 mm type ADWSG Aluminium weather protection grille for outside For exhaust air from extractor bonnets or exhaust air dryers Absolutely weatherproof With insect screen made of fine-meshed stainless steel mesh With rigid louvres Round connection on the back for connecting a ventilation duct or hose Installation:Insert the weather protection grille with the connection piece into the ventilation duct and fasten with screws.

Weather protection grille Ø 100 mm to Ø 150 mm type WSHE Stainless steel V2A Design weather protection grille for outside, weatherproof With self-closing flap, damped flap stop, no rattling due to metal on metal With rubber sealing tape for perfect connection to external façade, screws for installation included in scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.

Weather protection grille made of pressed aluminium Suitable for spiral ducts Installation without screws and tools Weather protection grille for outside, weatherproof For installation on external wall, for exhaust air from extractor bonnets or exhaust air dryers Fixed louvres prevent the ingress of rainwater Spigot length at the rear: 50 mm

Weather protection grille Ø 100 mm to Ø 200 mm type WSQLE Stainless steel V2A Design weather protection grille for outside, weatherproof With movable slats With rubber sealing tape for perfect connection to the external façade, screws for installation included in the scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.

External grille SG 100 white, for aeration and ventilation, DN100Features:Quality Made in GermanyExternal grille - for easy installationWith concealed screw holes. Sealing tape included in the scope of delivery. External wall connection when using wall sleeve WH 100 & 120 & 150. Weather and UV-resistant plastic housingAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:External grille for ventilation. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Artikel: SG 100, Air direction: Ventilation, Installation: Outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Weather-resistant, UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.1 kg, Weight with packaging: 0.127 kg, Suitable for nominal width: 100 mm, Width: 150 mm, Height: 150 mm, Depth: 51.5 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 55 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no, With wire mesh: no, With insect screen: no, With pressure relief damper, intake: no, With pressure relief damper, exhaust: no, With counter-rotating damper valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no

Insertion grille for spiral duct with bird protection mesh 12 x 12 mm

Weather protection grille for flat duct Rear, angular connection for direct connection to flat duct With bird and fly screen Material: galvanised steel

Weather protection grille Ø 100 mm to Ø 200 mm type WSKE Stainless steel V2A Design weather protection grille for outside, weatherproof With insect screen made of fine-meshed stainless steel mesh With rigid slats The clamping tab prevents watermarks on the wall With rubber sealing tape for perfect connection to the external façade, screws for installation included in the scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Also attach the clamping tab. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.

Weather protection grille Ø 100 mm to Ø 200 mm type WSKED Stainless steel V2A Design weather protection grille for outside, weatherproof With bird protection grille mesh size 12.5 x 12.5 mm With rigid slats The clamping tab prevents watermarks on the wall With rubber sealing tape for perfect connection to the external façade, screws for installation included in the scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Also attach the clamping tab. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.

External grille SG 150/1 for aeration and ventilation, DN150, whiteDescription:External grille for ventilation and air extraction. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Article: SG 150/1, Air direction: Ventilation and extraction, Installation: outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, weather and UV-resistant, Colour: traffic white, similar to RAL 9016, Weight: 0.4 kg, Weight with packaging: 0.41 kg, Width: 200 mm, Height: 200 mm, Depth: 56 mm, Width with packaging: 202 mm, Height with packaging: 202 mm, Depth with packaging: 58 mm,Ambient temperature: 60 °C, Suitable for box fans: no, Suitable for roof ventilators: no, Suitable for duct fans: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, Nominal duct diameter: 150 mm, Nominal duct diameter: 150 mm, Front height: 200 mm, Front width: 200 mm, Front diameter: 144 mm, Installation depth: 29 mm , With wire mesh: yes, With insect screen: no, With overpressure flap, intake: no , With pressure relief flap, blow-out: no , With counter-rotating flap valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no

External grille MGR 160 aluminium round, for pipe DN160Features:Quality Made in GermanyExternal grille - for easy installationWith unrolled blades and bird protection grille. With DN 160 connection piece for direct connection to ventilation ducts and a round connection piece with rubber seal. Attractive design - compatible with any interior style Suitable for continuous operation.Description:Weather protection grille for ventilation in a particularly high-quality design. MGR 160 aluminium: For covering round ventilation openings. MGE 160 aluminium: For covering rectangular ventilation openings. With angled blades and bird protection grille. With DN 160 spigot for direct connection to ventilation ducts. MGE 160 alu has a round connection spigot with Gummidichtung.Artikel: MGR 160 alu, Type: round, Air direction: ventilation, Material: cast aluminium, Weight: 0.385 kg, Weight with packaging: 0.39 kg, Suitable for nominal width: 160 mm, Free cross-section: 120 cm2, Width: 260 mm, Height: 240 mm, Depth: 81 mm, Width with packaging: 263 mm, Height with packaging: 243 mm, Depth with packaging: 84 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille MGE 80/125 white, square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGE 80/125 white, Design: rectangular, Air direction: ventilation, Material: metal, Weight: 0.1 kg, Weight with packaging: 0.145 kg, Width: 150 mm, Height: 150 mm, Depth: 25 mm, Width with packaging: 153 mm, Height with packaging: 153 mm, Depth with packaging: 26 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille SG 120 for ventilation, DN120, whiteFeatures:Quality Made in GermanyExternal grille - for easy installationWith concealed screw holes. Sealing tape included in the scope of delivery. External wall connection when using wall sleeve WH 100 & 120 & 150. Weather and UV-resistant plastic housingAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:External grille for ventilation. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Artikel: SG 120, Air direction: Ventilation, Installation: Outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Weather-resistant, UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.165 kg, Weight with packaging: 0.175 kg, Suitable for nominal diameter: 125 mm, Width: 172 mm, Height: 172 mm, Depth: 53 mm, Width with packaging: 175 mm, Height with packaging: 175 mm, Depth with packaging: 54 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: yes, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no, With wire mesh: no, With insect screen: no, With pressure relief damper, intake: no, With pressure relief damper, exhaust: no, With counter-rotating damper valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no

Stainless steel air bonnet LH-V2A 12 for ventilation, DN125Features:Quality Made in GermanyAir bonnet for outside or exhaust air - for simple ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.Description:Air bonnet for ventilation and extraction. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when the air bonnet is used for exhaust air, on-site measures must be taken to ensure that any condensation water that may occur does not get onto the air bonnet. Condensation water must be prevented from running off the building facade, especially when the air hood is used for exhaust airuft.Artikel: LH-V2A 12, Air direction: Ventilation, Installation: Outside, Installation location: Outside wall, Material: Stainless steel, Colour: Stainless steel, brushed, Weight: 0.317 kg, Weight with packaging: 0.32 kg, Suitable for nominal width: 125 mm, Free cross-section: 98 cm2, Width: 190 mm, Height: 190 mm, Depth: 45 mm, Width with packaging: 191 mm, Height with packaging: 191 mm, Depth with packaging: 150 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille MGE 80/125 V2A square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGE 80/125 V2A, Design: rectangular, Air direction: Ventilation, Material: Stainless steel, Weight: 0.1 kg, Weight with packaging: 0.138 kg, Width: 150 mm, Height: 150 mm, Depth: 25 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 26 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille SG 100 B for aeration and ventilation, DN100, brownFeatures:Quality Made in GermanyExternal grille - for easy installationWith concealed screw holes. Sealing tape included in the scope of delivery. External wall connection when using wall sleeve WH 100 & 120 & 150. Weather and UV-resistant plastic housingAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:External grille for ventilation. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Artikel: SG 100 B, Air direction: Ventilation, Installation: Outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Weather-resistant, UV-resistant, Colour: Chestnut brown, similar to RAL 8015, Weight: 0.1 kg, Weight with packaging: 0.127 kg, Suitable for nominal width: 100 mm, Width: 150 mm, Height: 150 mm, Depth: 51.5 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 55 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no, With wire mesh: no, With insect screen: no, With pressure relief damper, intake: no, With pressure relief damper, exhaust: no, With counter-rotating damper valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no

Stainless steel air bonnet LH-V2A 10 for aeration and ventilation, DN100Features:Quality Made in GermanyAir bonnet for outside or exhaust air - for simple ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.Description:Air bonnet for ventilation and extraction. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when the air bonnet is used for exhaust air, on-site measures must be taken to ensure that any condensation water that may occur does not get onto the air bonnet. Condensation water must be prevented from running off the building facade, especially when the air hood is used for exhaust airuft.Artikel: LH-V2A 10, Air direction: Ventilation, Installation: Outside, Installation location: Outside wall, Material: Stainless steel, Colour: Stainless steel, brushed, Weight: 0.211 kg, Weight with packaging: 0.213 kg, Suitable for nominal width: 100 mm, Free cross-section: 63 cm2, Width: 150 mm, Height: 150 mm, Depth: 45 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 124 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille MGR 80/125 V2A round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGR 80/125 V2A, Version: round, Air direction: ventilation, Material: stainless steel, Weight: 0.1 kg, Weight with packaging: 0.112 kg, Outer diameter: 130 mm, Width: 130 mm, Height: 130 mm, Depth: 130 mm, Width with packaging: 130 mm, Height with packaging: 27 mm, Depth with packaging: 130 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille MGE 80/125 aluminium square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGE 80/125 alu, Design: rectangular, Air direction: ventilation, Material: aluminium, Weight: 0.079 kg, Weight with packaging: 0.1 kg, Width: 150 mm, Height: 150 mm, Depth: 30 mm, Width with packaging: 153 mm, Height with packaging: 153 mm, Depth with packaging: 31 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Quality Made in GermanyAir bonnet for outside or exhaust air - for easy ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.

External grille MGR 80/125 aluminium round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGR 80/125 alu, Version: round, Air direction: ventilation, Material: aluminium, Weight: 0.07 kg, Weight with packaging: 0.1 kg, Outer diameter: 130 mm, Width: 130 mm, Height: 130 mm, Depth: 133 mm, Width with packaging: 133 mm, Height with packaging: 30 mm, Depth with packaging: 133 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

External grille MGR 80/125 white, round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGR 80/125 white, Type: Round, Air direction: Ventilation, Material: Metal, Weight: 0.1 kg, Weight with packaging: 0.102 kg, Outer diameter: 130 mm, Width: 130 mm, Height: 130 mm, Depth: 133 mm, Width with packaging: 133 mm, Height with packaging: 25 mm, Depth with packaging: 133 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Stainless steel air bonnet LH-V2A 15 for aeration and ventilation, DN150Features:Quality Made in GermanyAir bonnet for outside or exhaust air - for simple ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.Description:Air bonnet for ventilation and extraction. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when the air bonnet is used for exhaust air, on-site measures must be taken to ensure that any condensation water that may occur does not get onto the air bonnet. Condensation water must be prevented from running off the building facade, especially when the air hood is used for exhaust airuft.Artikel: LH-V2A 15, Air direction: Ventilation, Installation: Outside, Installation location: Outside wall, Material: Stainless steel, Colour: Stainless steel, brushed, Weight: 0.397 kg, Weight with packaging: 0.403 kg, Suitable for nominal width: 150 mm, Free cross-section: 146 cm2, Width: 212 mm, Height: 212 mm, Depth: 52 mm, Width with packaging: 215 mm, Height with packaging: 215 mm, Depth with packaging: 170 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no