Shut-off damper: galvanised steel or stainless steel V2A with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip, tight-closing to DIN EN 1751 class 4, best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo LM230A damper actuator for open/close control of dampers, for 230 V, 5 NM torque, for dampers up to 1m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo LM230A Electrical data Rated voltage AC 230 V Rated voltage Frequency 50/60 Hz Operating range AC 85...264 V Power consumption in operation 1.5 W Power consumption idle position 0.5 W Power consumption dimensioning 3.5 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 5 Nm Direction of rotation Motor selectable with switch 0 (anti-clockwise) / 1 (clockwise rotation) Manual adjustment Gear disengagement with push button, lockable Angle of rotation max. 95° Angle of rotation Note can be limited on both sides by adjustable mechanical stops Motor running time 150 s / 90° Motor sound power level 35 dB(A) Axle mounting Universal clamping block 6...20 mm Mechanical position indicator, clip-on Safety Protection class IEC/EN II insulated Protection class UL II insulated Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2004/108/EC Low Voltage Directive CE according to 2006/95/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 Certification UL cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control 43 kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.50 kg

Shut-off damper steel, galvanised with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo LM24A damper actuator for open/close control of dampers, for 24 V, 5 NM torque, for dampers up to 1m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo LM24A Electrical data Rated voltage AC/DC 24 V Nominal voltage Frequency 50/60 Hz Functional range AC 19.2...28.8 V / DC 19.2...28.8 V Power consumption operation 1 W Power consumption idle position 0.2 W Power consumption dimensioning 1.5 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 5 Nm Direction of rotation Motor selectable with switch 0 (anti-clockwise) / 1 (clockwise rotation) Manual adjustment Gear disengagement with push button, lockable Angle of rotation max. 95° Angle of rotation Note can be limited on both sides by adjustable mechanical stops Motor running time 150 s / 90° Motor sound power level 35 dB(A) Axle mounting Universal clamping block 6...20 mm Mechanical position indicator, clip-on Safety Protection class IEC/EN III Safety extra-low voltage Protection class UL UL Class 2 Supply Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2004/108/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 UL cULus certification in accordance with UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control ##########_45__ kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.49 kg

Shut-off damper: galvanised steel or stainless steel V2A with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing according to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo CM230-L damper actuator for open/close control of dampers, AC 230 V, 2 NM torque for dampers up to 0.4 m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo CM230-L Electrical data Rated voltage AC 230 V Rated voltage Frequency 50/60 Hz Operating range AC 85...264 V Power consumption in operation 1.5 W Power consumption idle position 0.5 W Power consumption dimensioning 3.5 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 5 Nm Direction of rotation Motor selectable with switch 0 (anti-clockwise) / 1 (clockwise rotation) Manual adjustment Gear disengagement with push button, lockable Angle of rotation max. 95° Angle of rotation Note can be limited on both sides by adjustable mechanical stops Motor running time 150 s / 90° Motor sound power level 35 dB(A) Axle mounting Universal clamping block 6...20 mm Mechanical position indicator, clip-on Safety Protection class IEC/EN II insulated Protection class UL II insulated Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2004/108/EC Low Voltage Directive CE according to 2006/95/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 Certification UL cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control 43 kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.50 kg

Shut-off damper steel, galvanised with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo TF230 damper actuator with spring return Running time motor 75 s / 90°; running time emergency control function <25 s / 90° for open/close control of dampers, for 230 V, 2.5 NM torque, for dampers up to 1m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo TF230 Electrical data Rated voltage AC 230 V Nominal voltage Frequency 50/60 Hz Operating range AC 85...264 V Power consumption in operation 2.5 W Power consumption idle position 1.5 W Power consumption Dimensioning 5 VA Power supply / control connection Cable 1 m, 2 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 2.5 Nm Spring return torque min. 2.5 Nm Motor direction selectable by mounting L / R Direction of travel Emergency adjustment function selectable by mounting L / R Manual adjustment no Angle of rotation max. 95° Angle of rotation Note adjustable from 37% in 2.5% increments (with mechanical stop) mechanical stop) Running time motor 75 s / 90° Running time emergency adjustment function <25 s / 90° Motor sound power level 50 dB(A) Axle drive Universal clamping block 6...12.7 mm Mechanical position indicator Service life min. 60,000 emergency positions Safety class Protection class IEC/EN II insulated Protection class IEC/EN IP42 EMC CE in accordance with 2004/108/EC Low Voltage Directive CE according to 2006/95/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 Mode of operation Type 1.AA Overvoltage category III Rated impulse voltage Supply / control Control 4 kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.69 kg

Shut-off damper: galvanised steel or stainless steel V2A with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing according to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft Belimo LMC24A, running time 35 sec., 5 Nm, constant, 95° AC 230 V, open-close, 3-point The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo LMC230A Electrical data Rated voltage AC 230 V Nominal voltage Frequency 50/60 Hz Operating range AC 85...264 V Power consumption operation 2 W Power consumption idle position 0.5 W Power consumption Dimensioning 4 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 5 Nm Direction of rotation Motor selectable with switch 0 (anti-clockwise) / 1 (clockwise rotation) Manual adjustment Gear disengagement with push button, lockable Angle of rotation max. 95° Angle of rotation Note can be limited on both sides by adjustable mechanical stops Motor running time 35 s / 90° Motor sound power level 45 dB(A) Axle mounting Universal clamping block 6...20 mm Mechanical position indicator, clip-on Safety Protection class IEC/EN II insulated Protection class UL II insulated Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2004/108/EC Low Voltage Directive CE according to 2006/95/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 Certification UL cULus according to UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control ##########_41__ kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.50 kg

Shut-off damper steel, galvanised with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo CM24-L damper actuator for open/close control of dampers, AC/DC 24 V, 2 NM torque for dampers up to 0.4 m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo CM24-L Electrical data Rated voltage AC/DC 24 V Nominal voltage Frequency 50/60 Hz Functional range AC 19.2...28.8 V / DC 19.2...28.8 V Power consumption in operation 0.5 W Power consumption idle position 0.2 W Power consumption Dimensioning 1 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 2 Nm Direction of rotation Motor anti-clockwise Manual adjustment with magnet Angle of rotation 0...287.5°, Angle of rotation Note without limit: endless with one end stop clip Z-ESCM: 315° Running time motor 75 s / 90° Motor sound power level 35 dB(A) Axle drive Universal clamping block 6...12.7 mm Mechanical position indicator, clip-on (with integrated magnet for gear disengagement) (with integrated magnet for gear disengagement) Safety Protection class IEC/EN III safety extra-low voltage (SELV) Protection class UL UL Class 2 Supply Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2014/30/EU Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 UL cULus certification in accordance with UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control ##########_48__ kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.28 kg

Shut-off damper steel, galvanised with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft Belimo LMC24A, running time 35 sec., 5 Nm, constant, 95° AC/DC 24 V, open-close, 3-point The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo LMC24A Electrical data Rated voltage AC/DC 24 V Nominal voltage Frequency 50/60 Hz Functional range AC 19.2...28.8 V / DC 19.2...28.8 V Power consumption in operation 1.5 W Power consumption idle position _##########_13__ W Power consumption dimensioning 2.5 VA Power supply / control connection Cable 1 m, 3 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 5 Nm Direction of rotation Motor selectable with switch 0 (anti-clockwise) / 1 (clockwise rotation) Manual adjustment Gear disengagement with push button, lockable Angle of rotation max. 95° Angle of rotation Note can be limited on both sides by adjustable mechanical stops Motor running time 35 s / 90° Motor sound power level 45 dB(A) Axle mounting Universal clamping block 6...20 mm Mechanical position indicator, clip-on Safety Protection class IEC/EN III Safety extra-low voltage Protection class UL UL Class 2 Supply Protection class IEC/EN IP54 Protection class NEMA/UL NEMA 2, UL Enclosure Type 2 EMC CE according to 2004/108/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 UL cULus certification in accordance with UL 60730-1A, UL 60730-2-14 and CAN/CSA E60730-1:02 Mode of operation Type 1 Rated impulse voltage Supply / Control 0.8 kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.49 kg

Shut-off damper steel, galvanised with EPDM sealing lips for airtight installation to DIN EN 12237 class D best class of this standard Damper blade with EPDM sealing lip tight-closing to DIN EN 1751 class 4 best class of this standard Damper blade with two bearings; damper with motorised bracket, rotatable for actuator mounting at any position, 360° around damper shaft With Belimo TF24 damper actuator with spring return Running time motor 75 s / 90°; running time emergency control function <25 s / 90° for open/close control of dampers, AC/DC 24 V, 2.5 NM torque, for dampers up to 1m² damper area The shut-off damper is inserted between two ventilation ducts Technical data sheet Belimo TF24 Electrical data Rated voltage AC/DC 24 V Nominal voltage Frequency 50/60 Hz Functional range AC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 2.5 W Power consumption idle position 1.5 W Power consumption Dimensioning 5 VA Power supply / control connection Cable 1 m, 2 x 0.75 mm² Parallel operation Yes (observe power data) Functional data Motor torque min. 2.5 Nm Spring return torque min. 2.5 Nm Motor direction selectable by mounting L / R Direction of rotation Emergency adjustment function selectable by mounting L / R Manual adjustment no Angle of rotation max. 95° Angle of rotation Note adjustable from 37% in 2.5% increments (with mechanical stop) mechanical stop) Running time motor 75 s / 90° Running time emergency adjustment function <25 s / 90° Motor sound power level 50 dB(A) Axle drive Universal clamping block 6...12.7 mm Mechanical position indicator Service life min. 60,000 emergency positions Safety class Protection class IEC/EN III Safety extra-low voltage Protection class IEC/EN IP42 EMC CE according to 2004/108/EC Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14 Mode of operation Type 1.AA Overvoltage category III Rated impulse voltage Supply / Control 0.8 kV Degree of pollution of the environment 3 Ambient temperature -30...50°C Storage temperature -40...80°C Ambient humidity 95% r.H, non-condensing Maintenance maintenance-free Weight approx. Weight approx. 0.69 kg