Browse our clearance and B-stock items

Intelmann garden torch / toilet paper torch / toilet paper torch Material: steel (rusting) Fire basket 45° bevelled Dimensions: total height: 115 cm; fire basket: 25/15 cm (45° bevelled); diameter of fire basket: 14 cm Handle: made of 1" steel pipe with spike for easier penetration into the ground Elegant garden torch, timeless design, the absolute eye-catcher for barbecues or garden parties Traces of rust may be visible due to processing and storage Garden torch / toilet paper torch made of steel (rusting). An absolute eye-catcher for barbecues, garden parties or outdoor birthday parties. The characteristic rust patina develops over the course of a few weeks / months. The integrated air holes at the bottom of the fire basket provide optimum ventilation and ensure the best possible burning power of the torch. The torch is lit with a roll of toilet paper soaked in rapeseed oil or sunflower oil. One roll absorbs approx. 0.75 litres of oil. (Alternatively, toilet paper soaked in candle wax can be used.) The roll soaks up the oil in approx. 10-15 minutes. Then place a piece of barbecue lighter on the toilet roll and light it. The toilet paper will ignite after approx. 5 minutes. It will burn for approx. two to three hours without needing to be topped up with oil. We recommend toilet paper with a high absorbency / large volume, as this ensures a long burning time. Please make sure that the torch handle has a sufficient hold in the ground. Do not extinguish the burning torch with water! Suitable extinguishing agents are sand, fire blanket or fire extinguisher! NOTES ON FIRE PROTECTION Please note that fire protection must be taken into account when using the torch. Set up the torch in a stable, wobble-free position on a non-flammable surface and out of the reach of children and pets! Protect it from tipping over due to accidental knocks! Wood fires can cause flying sparks. The wind conditions must be observed accordingly.

EPDM sealing ring 63mm, suitable for the XS system 63 mm

Sleeve made of galvanized steel sheet for connecting individual parts of the plastic ventilation pipe Ø 63 mm.

Intelmann garden torch / toilet paper torch / toilet paper torch Material: stainless steel V2A (polished) Fire basket 45° bevelled Dimensions: total height: 115 cm; fire basket: 25/15 cm (45° bevelled); diameter of fire basket: 14 cm Handle: made of 1" stainless steel tube with spike for easier penetration into the ground Elegant garden torch, timeless design, the absolute eye-catcher for barbecues or garden parties The heat causes the stainless steel fire basket to turn golden / purple / blue in colour Garden torch / toilet paper torch made of V2A stainless steel. An absolute eye-catcher for barbecues, garden parties or outdoor birthday parties. The integrated air holes at the bottom of the fire basket provide optimum ventilation and ensure the best possible burning power of the torch. The torch is lit with a roll of toilet paper soaked in rapeseed oil or sunflower oil. One roll absorbs approx. 0.5 - 0.75 litres of oil. (Alternatively, toilet paper soaked in candle wax can be used.) The roll soaks up the oil in approx. 10-15 minutes. Then place a piece of barbecue lighter on the toilet roll and light it. The toilet paper will ignite after approx. 5 minutes. It will burn for approx. two to three hours without needing to be topped up with oil. We recommend toilet paper with a high absorbency / large volume, as this ensures a long burning time. Please make sure that the torch handle has a sufficient hold in the ground. Do not extinguish the burning torch with water! Suitable extinguishing agents are sand, fire blanket or fire extinguisher! NOTES ON FIRE PROTECTION Please note that fire protection must be taken into account when using the torch. Set up the torch in a stable, wobble-free position on a non-flammable surface and out of the reach of children and pets! Protect it from tipping over due to accidental knocks! Wood fires can cause flying sparks. The wind conditions must be observed accordingly.

PVC end cap 63mm, suitable for the XS system 63 mm This end cap is used for permanent or temporary closure.

Exhaust bend ØD=152 mm, V2A, 135°, H=1150mm, suitable only for KG pipe socket DN 150/160.The standard ABB2-KG150 is slipped over the KG pipe. This involves a smaller internal diameter of 152 mm! Therefore, it only fits into the KG pipe socket!

Branch piece for direct connection of a plate valve Ø 125 mm Connection to the XS system hose via two nozzles Ø 75 mm For mounting on floor, wall or ceiling Auxiliary tabs on the sides with drill holes The tapering shape towards the rear ensures an optimised airflow as far as possible Connection: 2x Ø 75 mm; outlet: Ø 125 mm; height: 150 mm

Exhaust bend nominal size 100 mm to 300 mm H = 1150 mm  made of stainless steel V2A 1.4301 rustproof (ground grain 200) with bird protection grille Exclusively suitable for KG pipe (orange) Exhaust bend in 135° segment construction Pipe connection with EPDM double-lip seal for connection to KG pipeInserted into KG pipe, with lip seal

HDR 12 - Brief InformationDiagonal fan, for duct installation, DN 125, motor with AC technology, three-speedHDR 12 - Product DescriptionSpecial FeaturesHighly efficient duct fan, made of high-quality plastic (PP).Suitable for industrial and residential building installations.With integrated mounting bracket for quick and easy fan attachment.High-pressure diagonal impeller with downstream stator for high air performance.Aerodynamically and acoustically optimised modular design ensures smooth running.Compact dimensions require little space.For direct installation between pipes, suitable for supply or exhaust air depending on installation position.Pressure and suction side connection spigots correspond to common standard pipe diameters.Quick and easy inspection and maintenance of the fan by opening the tension clamps.Protection class IP 44.AC MotorSpeed controllable 3-stage, optionally speed controllable via phase angle control or transformer.Thermal overload protection standard.Electrical connection via terminal box integrated on the housing.Robust motor with moisture protection and ball bearings, maintenance-free.Thermal class 130 (B).Installation InstructionsInstallation possible in any position.Electrical ConnectionExternal terminal box with cable entry gland.Safety InstructionsOperate the fan with free intake or free outlet only if the impeller’s contact protection according to DIN EN ISO 13857 is ensured. For this, optionally fit the protective grille SGR.Installation / Operation / Maintenance Wiring diagramsSafety instructions for industrial fans: pdf | onlineInstallation instructions ArticleHDR 12Airflow volume462 m³/hSpeed2,682 rpmImpeller typediagonalSpeed controllable✔Reversibility−Type of voltageAlternating currentRated voltage230 VMains frequency50 HzRated power39.3 W / at optimal efficiencyIRated0.16 A / at optimal efficiencyIMax0.18 AProtection classIP 44Thermal classBInstallation positionvertical / horizontalMaterialPlastic PPHousing materialPolypropyleneColourgreyWeight2.58 kgWeight with packaging3.1 kgNominal diameter125 mmWidth235 mmHeight244.5 mmDepth295 mmWidth with packaging255 mmHeight with packaging245 mmDepth with packaging310 mmMedium temperature at IMax50 °CPackaging unit1 pieceRangeCGTIN (EAN)4012799805373Article number0080.0537

Distribution box, 1x DN200 nipple inlet with lip seal, 12x DN63 outlets, 6 outlets per longitudinal side, galvanized Width: 300mm; Height: 145mm; Length: 600mm  

Distribution box with two DN200 connections and 12 DN75 outlets made of galvanized steel sheet 6 outlets per side as main distributor Width: 235mm; Height: 305mm; Depth: 235mm Inlet: 2x DN200; Outlet: 12x DN75  

Distribution box with one DN200 connection and 10 DN75 outlets made of galvanized steel sheet Two rows with 5 outlets each as main distributor Width: 560mm; Height: 500mm; Depth: 300mm Inlet: 1x DN250; Outlet: 10x DN75  

Distribution box, 1x DN250 inlet nipple with lip seal, 6x DN63 outlets, 1 row of 6 on one side, galvanised Width: 560mm; Height: 500mm; Depth: 300mm

Distribution box, 1x DN250 inlet nipple with lip seal, 10x DN63 outlet, 2 rows of 5 on one side, galvanised Width: 560mm; Height: 500mm; Depth: 300mm

Ventilation duct for use as supply or exhaust air duct in rooms with central systems for controlled residential ventilation. Outer diameter 63 mm Inner diameter 51 mm Flexible ventilation duct in composite pipe construction Corrugated outside, smooth inside Hygienically tested Outer pipe pressure-resistant, inner pipe sound-absorbing  

Distribution box, 1x DN250 inlet nipple with lip seal, 12x DN63 outlets, 2 rows of 6 pieces on one side, galvanized Width: 560mm; Height: 500mm; Depth: 300mm  

Round louvre hood V2A DN 160 in RAL 7031 spray-painted

Distribution box, 1x DN200 nipple inlet with lip seal, 6x DN63 outlets, 3 outlets per longitudinal side, galvanized Width: 300mm; Height: 145mm; Length: 600mm  

Ventilation pipe for use as a supply or exhaust air pipe in rooms with centralised systems for controlled domestic ventilation. Outer diameter 75 mm Inner diameter 63 mm Flexible ventilation pipe in composite pipe construction Corrugated outside, smooth inside Hygienically tested Outer pipe pressure-resistant, inner pipe sound-absorbing

Distribution box, 1x DN200 nipple inlet with lip seal, 18x DN63 outlets, 9 outlets per long side, galvanised Width: 300mm; Height: 145mm; Length: 600mm

Louvre cover round V2A DN 160 in RAL 7004 spray-painted