Accessories

Radio switch DS RC Radio switch for MAICOsmartFeatures:Made in Germany quality, protection class IP 20 for safety in the officeFor simple operation of the fan in the office or home - the elegant control unit. Radio switch can be used individually or with the MAICOsmart system. For refurbishments and retrofitting. Can be used anywhere where no control cable can be installed. Requires no batteries and is mobile. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any office furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Description:EnOcean wireless switch. The wireless switch can be used individually with the ECA ... ipro RC/RCH, ER 100 RC or with the MAICOsmart system. The radio switch can also be used in combination with the EnOcean plug-in module E-SM to control the central ventilation units WS 160 Flat, WS 170 KBR../WS 170 KBL.., WS 320/470 and WR 310/410 via EnOcean. For refurbishments and retrofitting - no painting or wallpapering required. Tiles do not need to be removed or replaced. Can be used wherever no control cable can be installed. Radio switch is mobile. Radio switch does not require a battery. Radio switch can be screwed or glued to glass surfaces. Simple programming of the transmitters saves time-consuming Programmierarbeit.Artikel: DS RC, Battery: not required, Protection rating: IP 20, Mains cable: not required, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.065 kg, Weight with packaging: 0.115 kg, Width: 83 mm, Height: 83 mm, Depth: 16 mm, Width with packaging: 87 mm, Height with packaging: 87 mm, Depth with packaging: 75 mm, Ambient temperature: -25 °C to 65 °C, Radio frequency: 868.3 MHz, Number of radio channels: 4 channels, Range in building: 30 m

DS 45 RC - Brief InformationRadio switch as an accessory for the final assembly sets PP 45 RC and PPB 30 RC, for wireless switching of PP 45 RC and PPB 30 RC devices, 5 ventilation levels adjustable, programmes: continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation, time-limited intensive ventilation, time-limited shutdownDS 45 RC - Product DescriptionSpecial FeaturesWith the DS 45 RC radio switch, 5 ventilation levels can be selected: PP 45 - 15/20/30/36/42 m³/h and PPB 30 - 5/12/18/22/26 m³/h, and 3 operating modes: continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled automatic operation.Operating mode continuous ventilation with heat recovery: PushPull operation. The devices run alternately and change the direction of rotation every 60 seconds.Operating mode cross ventilation: One device is permanently in supply air mode and the corresponding device in extract air mode (e.g. for summer night cooling).Automatic operation is only possible with the optionally integrable humidity sensor PP 45 HYI in the RC device.Single operation of the PP 45 RC and PPB 30 RC with the DS 45 RC radio switch is also possible.By pressing a button, time-limited intensive ventilation (shock ventilation) or time-limited shutdown (sleep function) can also be selected.Any number of devices within range can be controlled via the DS 45 RC radio switch.Use wherever no control cable can be installed.The radio switch requires no battery.The radio switch can be screwed on or stuck to glass surfaces.FeaturesThe radio switch is required as an accessory for the final assembly sets PP 45 RC and PPB 30 RC.Installation / Operation / Maintenance Quick start RV 2 and PP 45: pdf | onlineInstallation instructions final assembly set PP 45: pdf | onlineInstallation manual: pdf | onlineOperating instructions: pdf | onlineInstallation and operating instructions DS 45 RC ArticleDS 45 RCPower supply cablenot necessaryInstallation locationWallType of installationSurface-mountedMaterialPlasticColourPure white, similar to RAL 9010Weight0.06 kgWeight with packaging0.07 kgWidth80 mmHeight80 mmDepth15 mmWidth with packaging90 mmHeight with packaging90 mmDepth with packaging37 mmPackaging unit1 pieceRangeKGTIN (EAN)4012799573630Article number0157.0363

Room air control RLS 45 O for up to 6 PushPull 60 O devicesFeatures:Quality Made in GermanyRoom air control - for simple control. Has 5 different ventilation levels as well as 3 operating programmes and a sensor-guided auto mode. Can be extended with a humidity sensor or an external sensor. Up to six devices can be connected. Programmes: Continuous ventilation with heat recovery, cross ventilation without heat recovery and auto mode.Attractive design - Neutral white colour similar to RAL 9016, compatible with any interior style Suitable for continuous operation. Description:Special features: 5 ventilation levels PP45-15/20/30/36/42m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto mode can be selected with the control unit. Continuous ventilation mode with heat recovery: PushPull operation. The devices run alternately and change direction every 60 seconds. Cross ventilation operating mode: One device is permanently in supply air mode and the corresponding device is in extract air mode (z.B. for summer night cooling). In automatic mode, the delivery volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 O room air control system can be expanded with the internal humidity sensor or with the external sensors (humidity, CO2, VOC). The delivery volume is adjusted and the devices achieve energy efficiency class A+. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of devices. Modbus connection possible. The control unit can be expanded with additional PP45 LT control units or power packs. The room air control unit is required as an accessory for the PP 45 K, PP 45 O or PPB 30 O final assembly sets. It is not possible to operate the PPB 30 K final assembly set in conjunction with the RLS 45 O room air control unit. Up to 6 PP45 devices or up to 3 PPB 30 O devices can be controlled simultaneously via an RLS 45 O room air control werden.Artikel: RLS 45 O, Rated voltage: 230 V, Mains cable: 2 / 1.5 mm2, Installation location: Wall, Installation type: Flush-mounted, Material: Plastic, Colour: Pure white, similar to RAL 9010, Weight: 0.1135 kg, Weight with packaging: 0.333 kg, Width: 80 mm, Height: 80 mm, Depth: 49 mm, Width with packaging: 81 mm, Height with packaging: 81 mm, Depth with packaging: 50 mm

RLS 45 K room air control unit for up to 6 PushPull 45 K devicesFeatures:Quality Made in GermanyRoom air control - for simple control. Has 5 different ventilation levels as well as 3 operating programmes and a sensor-guided auto mode. Can be extended with a humidity sensor or an external sensor. Up to six devices can be connected. Safety shutdown and configuration with PC/laptop. Programmes: Continuous ventilation with heat recovery, cross ventilation without heat recovery and sensor-guided auto mode. Time limit switch-off and intensive ventilationAttractive design - Neutral white similar to RAL 9016, compatible with any interior style Suitable for continuous operation. Description:Special features: 5 ventilation levels PP45-15/20/30/36/42m3/h and PPB 30 - 5/12/18/22/26 m3/h and 3 operating modes continuous ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto mode can be selected with the control unit. Continuous ventilation mode with heat recovery: PushPull operation. The devices run alternately and change direction every 60 seconds. Cross ventilation operating mode: One device is permanently in supply air mode and the corresponding device is in extract air mode (z.B. for summer night cooling). In automatic mode, the delivery volume is continuously adjusted to the sensor value (HYI, HY, CO2, VOC). The RLS 45 K room air control system can be expanded with the internal humidity sensor or with the external sensors (humidity, CO2, VOC). The delivery volume is adjusted and the devices achieve energy efficiency class A+. Operation of an odd number of devices is possible. The volume flows are automatically divided according to the number of appliances. Time-limited intensive ventilation (shock ventilation) or time-limited switch-off (sleep function) can also be selected at the touch of a button. The RLS 45 K room air control unit enables communication between exhaust air units (z.B. ECA/ER) and PushPull units. D.h. When an extract air fan starts up, the PushPull units switch to supply air mode to compensate for the resulting negative pressure. Supply air operation is possible with a run-on time of 0.6 or 15 minutes. The number of connected devices is also taken into account. The control unit has a separate 230 V input whose function can be defined in the software. The following functions are available for selection: Safety shutdown, sleep function, shock ventilation, supply air function for the exhaust air units with 0s, 6min or 15min overrun. ModBus connection is possible. In addition, the RLS 45 K room air control unit offers the option of conveniently configuring the device with a PC/laptop (Windows) using the commissioning software. Simple, time-saving digital commissioning and creation of digital commissioning protocols and recovery files. In combination with the EnOcean extension module PP 45 EO, the RLS 45 K room air control unit offers the unique possibility of connecting the wired PP 45 K and PP 45 O and the PP 45 RC radio devices with each other. With this control combination, it is therefore possible to z.B. wired devices can be installed on the ground floor and radio devices on the first floor. The entire system is controlled at the touch of a button. The control system can be expanded with additional PP45 LT control units or power packs. The room air control unit is required as an accessory for the PP 45 K, PP 45 O or PPB 30 K, PPB 30 O final assembly sets. For the PP 45 RC range of appliances, the RLS45 K wired control unit can be used as an option instead of the DS 45 RC wireless switch. The combination of RLS 45 K with the EnOcean extension module PP 45 EO is then required. Up to 6 fans can be controlled simultaneously via an RLS 45 K room air control unit, z.B. 6 x PP 45 devices or 4 x PP 45 devices + 1 x PPB 30 or up to 3 x PPB 30 deviceste.Artikel: RLS 45 K, Rated voltage: 230 V, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Flush-mounted, Material: Plastic, Colour: pure white, similar to RAL 9010, Weight: 0.112 kg, Weight with packaging: 0.341 kg, Width: 80 mm, Height: 80 mm, Depth: 49 mm, Width with packaging: 81 mm, Height with packaging: 81 mm, Depth with packaging: 50 mm

Delay time switch VZ 6 Run-on time 6 minFeatures:Made in Germany quality, protection class IP 40 for safety in the homeDelay timer - for simple operationControl of run-on time and switch-on delay. Can be operated using standard switches or push-buttons. Switch-on delay 50 s, run-on time 6 min.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Delay timer for controlling the switch-on delay and run-on time of fans. Can be operated using standard switches. VZ 24 C: Can be operated via standard switches or push-buttons. Interference-proof in accordance with EN 61000-4-5 (at 1000 V to 4000 V). If necessary, take additional interference suppression measures (L, C or RC elements, protective diodes, varistors). Test mark: VDE.Artikel: VZ 6, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Maximum load: 1.25 A, Protection rating: IP 40, Weight: 0.012 kg, Weight with packaging: 0.016 kg, Width: 20 mm, Height: 13 mm, Depth: 35 mm, Width with packaging: 20 mm, Height with packaging: 13 mm, Depth with packaging: 35 mm, Ambient temperature: 0 °C to 50 °C, Remote control: no, Run-on time: 6 min, Switch-on delay: 50 s, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Delay time switch VZ 12 Run-on time 12 minFeatures:Made in Germany quality, protection class IP 40 for safety in the homeDelay timer - for simple operationControl of run-on time and switch-on delay. Can be operated using standard switches or push-buttons. Switch-on delay 50 s, run-on time 12 min.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Delay timer for controlling the switch-on delay and run-on time of fans. Can be operated using standard switches. VZ 24 C: Can be operated via standard switches or push-buttons. Interference-proof in accordance with EN 61000-4-5 (at 1000 V to 4000 V). If necessary, take additional interference suppression measures (L, C or RC elements, protective diodes, varistors). Test mark: VDE.Artikel: VZ 12, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Maximum load: 1.25 A, Protection rating: IP 40, Weight: 0.012 kg, Weight with packaging: 0.016 kg, Width: 20 mm, Height: 13 mm, Depth: 35 mm, Width with packaging: 20 mm, Height with packaging: 13 mm, Depth with packaging: 35 mm, Ambient temperature: 0 °C to 50 °C, Remote control: no, Run-on time: 12 min, Switch-on delay: 50 s, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Delay time switch VZ 24 C Run-on time 1.5 to 24 minFeatures:Made in Germany quality, protection class IP 40 for safety in the homeDelay timer - for simple operationControl of run-on time and switch-on delay. Can be operated using standard switches or push-buttons. Switch-on delay 0-150 s, run-on time 1.5-24 min.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Delay timer for controlling the switch-on delay and run-on time of fans. Can be operated using standard switches. VZ 24 C: Can be operated via standard switches or push-buttons. Interference-proof in accordance with EN 61000-4-5 (at 1000 V to 4000 V). If necessary, take additional interference suppression measures (L, C or RC elements, protective diodes, varistors). Test mark: VDE.Artikel: VZ 24 C, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Maximum load: 1.25 A, Protection rating: IP 40, Weight: 0.012 kg, Weight with packaging: 0.016 kg, Width: 20 mm, Height: 13 mm, Depth: 35 mm, Width with packaging: 20 mm, Height with packaging: 13 mm, Depth with packaging: 35 mm, Ambient temperature: 0 °C to 50 °C, Remote control: no, Run-on time: 1.5 min - 24 min, Switch-on delay: 0 s - 150 s, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Room air control RLS 1 WR for WS 160 Flat, WS 170, WR 300/400/600Features:Quality Made in GermanyRoom air control - for easy installationIncluded in the scope of delivery of WS 160 Flat, WS 170, WR 310/WR 410, WS 320, WS 470 and WR 600. Filter change and fault indication via LED. Incl. adapter plate for flush-mounted box.Attractive design - compatible with any furnishing styleSuitable for continuous operation.Description:Included with the WS 160 Flat, WS 170, WR 310 / WR 410, WS 320, WS 470 and WR 600 ventilation units. Additional control units can be connected in parallel. Setting of 4 ventilation levels via buttons. With filter change message via LED. With fault indication via LED. Supplied with adapter plate for flush-mounted box. Control cable to the device LiYY 7x0.34 mm2. Power supply via the WS/WR deviceste.Artikel: RLS 1 WR, Voltage type: Alternating current, Rated voltage: 12 V, Material: Plastic, Plastic details: Polystyrene, PVC-free, Weight: 0.088 kg, Weight with packaging: 0.1 kg, Width: 80 mm, Height: 80 mm, Depth: 35 mm, Width with packaging: 87 mm, Height with packaging: 87 mm, Depth with packaging: 45 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

VZI 10 - Brief InformationInterval switch for regular ventilation of rarely used rooms, switch-on delay 50 s, run-on time 10 minVZI 10 - Product DescriptionInterval switch for regular ventilation of rarely used rooms.Switching on the fan via interval switch and manual operation possible.Operation possible via standard switches.Interval time adjustable: 1 h to 15 h.Installation in flush-mounted box possible.Installation / Operation / Maintenance Wiring DiagramsInstallation Instructions ArticleVZI 10Rated Voltage230 VMains Frequency50 Hz / 60 HzMaximum Load1.25 AProtection ClassIP 40Weight0.01 kgWeight with Packaging0.02 kgWidth20 mmHeight13 mmDepth35 mmWidth with Packaging20 mmHeight with Packaging13 mmDepth with Packaging35 mmAmbient Temperature0 °C to 50 °CRemote Control−Run-on Time10 minSwitch-on Duration10 minSwitch-on Delay50 sPackaging Unit1 pieceRangeAGTIN (EAN)4012799578239Article Number0157.0823

AKE/1 - Brief informationControl unit AKE/1 incl. 2 pcs. AKE FFT humidity and temperature sensor (4m cable, can be extended on site to max. 30m) for fully automatic cellar dehumidification in conjunction with various fansAKE/1 - Product descriptionProduct featuresFully automatic, intelligent cellar dehumidification control for the highest demands.Permanent equalisation of the absolute humidity indoors and outdoors: Connected fans ventilate independently if the absolute humidity in the room is higher than outside.No maintenance or manual control required: install once and the system works automatically.Operation of fans up to a total (supply and extract air fan) of 600 W and 3 A.For the use of fans > 600 W and 3 A as well as three-phase fans, a circuit breaker must be installed between the control unit and the fan.Barrier-free product, as it switches on/off automatically without additional switches.Control unit monitors the room humidity via integrated humidity/temperature sensors.Frost protection function: system switches off at indoor temperatures below 5 °C.Additional manual operation for 30 minutes can be switched on and off again using a button on the control unit.No additional installation from the switch to the device necessary.Additional manual operation with external button or switch possible.Automatic button / switch detection.Status and function display via LEDs.Compact dimensions: Control unit 160 x 110 x 90 mm, outdoor sensor Ø50 mm, height 13 mm.Scope of delivery: Control unit, 2 sensors with 4 m cable length each.Sensor cable can be extended on site with LIYY 4x0.25 mm² cable to max. 30 (separate installation required).Housing made of impact-resistant plastic.IP protection: Control unit IP40 / outdoor sensor IP54.Frost protection: To prevent the room from cooling down, the AKE has a frost protection function. This automatically switches off the connected fan(s) at indoor temperatures of less than 5 °C.Garage dehumidification: optional switch-off of the frost protection function for unheated rooms.Suitable for continuous operation.Installation instructionsSimple installation: Wall mounting.Electrical connection: Surface-mounted.

RLS 3 - Brief InformationControl unit for central ventilation units WS 150, ZEG 2000 P and ER 100 D, as well as duct fan HDR EC, On/Off, 3 levelsRLS 3 - Product DescriptionThree-stage room air control for exhaust fan ER 100 D and duct fan HDR EC.3 switching levels: basic, normal, full load (rotary knob).With separate, 2-pole On/Off switch (rocker switch).Both switches in a common double frame.Installation / Operation / Maintenance Wiring diagramsInstallation instructions ArticleRLS 3Type of voltageAlternating currentRated voltage230 VMaximum load10 AProtection classIP 30Type of installationFlush-mountedInstallation positionVertical / horizontalMaterialPlasticPlastic detailsPolystyrene, PVC-freeWeight0.19 kgWeight with packaging0.23 kgWidth150 mmHeight80 mmDepth32 mmWidth with packaging155 mmHeight with packaging83 mmDepth with packaging83 mmPackaging unit1 pieceRangeKGTIN (EAN)4012799578314Article number0157.0831

Product Information „Lunos 040113 Smart Comfort Control 5/SC-FT for e², ego and RA 15-60 with Humidity and Frost Protection“The Lunos Smart Comfort Control 5/SC-FT (Art. No. 040113) is an intelligent control solution for the ventilation series e², e²60, e²kurz, e²mini, ego as well as RA 15-60. The combination of control and operating unit enables comfortable, demand-oriented regulation of the ventilation system based on integrated humidity and temperature sensors.In automatic mode, the control independently adjusts the ventilation performance to the room conditions and offers eight automatic control levels. Additionally, four manually selectable ventilation levels as well as special operating modes such as summer mode, night setback and intensive ventilation are available.A separate power supply is required for operation, which is not included in the scope of delivery.Advantages at a glance✅ Intelligent control for multiple Lunos ventilation systems✅ Humidity-controlled automatic operation✅ Integrated temperature and frost protection✅ Eight automatic ventilation levels✅ Four manually selectable ventilation levels✅ Summer mode, night setback and intensive ventilation✅ Comfortable operation via separate control unit✅ Energy-efficient and demand-oriented ventilationCompatibility✔ Lunos e²✔ Lunos e²60✔ Lunos e²kurz✔ Lunos e²mini✔ Lunos ego✔ Lunos RA 15-60Functions✔ Humidity-controlled automatic operation✔ Temperature-dependent control✔ Frost protection function✔ Summer mode✔ Night setback✔ Intensive ventilation✔ Manual ventilation control✔ Automatic regulation in 8 levelsTechnical Details✔ Manufacturer: Lunos✔ Article number: 040113✔ Type: 5/SC-FT✔ Operating voltage: 12 V DC✔ Functional voltage range: 0–10 V✔ Maximum operating switching current: 5 A✔ Maximum connection power: 60 WInstallation✔ Installation in deep switch box with 90 mm depth✔ Suitable for living rooms, bedrooms and wet roomsPower supply requiredA compatible power supply is additionally required for operation:✔ 5/NT18 – 18 W (Art. No. 039973)✔ 5/NT60 – 60 W (Art. No. 039974)✔ 5/NT100 – 100 W (Art. No. 040096)Power supply not included in the scope of delivery.Features✔ Demand-oriented ventilation control✔ Energy-efficient operation✔ Comfortable operation✔ Automatic adjustment to room climate and season✔ Original Lunos system accessoriesAreas of application– Living rooms– Bedrooms– Bathrooms– Controlled residential ventilation– New build and renovationThe Lunos Smart Comfort Control 5/SC-FT ensures intelligent and comfortable regulation of decentralised ventilation systems. Thanks to automatic humidity and temperature monitoring as well as special comfort functions, it supports a pleasant indoor climate while maintaining energy-efficient operation.

Product Information „Lunos 036986 Switch 5/W2 for Silvento, two-stage, 2-pole, white“The Lunos Switch 5/W2 (Art. No. 036986) is a two-stage rocker switch for controlling ventilation units of the Silvento series. The two switching stages allow the fans to be conveniently switched between the operating levels of 0, 30 and 60 m³/h.The switch is designed for installation in a standard switch box and blends harmoniously into existing switch programmes with its simple white design.Advantages at a glance✅ Original Lunos switch✅ Two-stage fan control✅ Switching of volume flows 0, 30 and 60 m³/h✅ 2-pole design✅ Easy operation via two rockers✅ Suitable for standard switch boxes✅ Discreet design in whiteFunctions✔ Switching the fan on/off✔ Switching between two ventilation levels✔ Control of volume flows 30 and 60 m³/hTechnical details✔ Manufacturer: Lunos✔ Article number: 036986✔ Type: 5/W2✔ Switch type: Two-rocker switch✔ Design: 2-poleCompatibility✔ Lunos Silvento series✔ Other compatible Lunos fans with two-stage switchingInstallation✔ Installation in standard flush-mounted switch box✔ Easy installationDesign✔ Series: Paris✔ Colour: WhiteFeatures✔ Robust design✔ Maintenance-free✔ Easy operation✔ Original Lunos system accessoryAreas of application– Bathroom– Guest WC– Utility rooms– Residential buildings– New build and renovationThe Lunos Switch 5/W2 enables simple and reliable control of Silvento fans. With the two-stage switching, the ventilation performance can be adjusted as required and controlled comfortably.

Product Information „Lunos 040288 Comfort Control Board 5/FK for Silvento ec with Humidity and Temperature Sensor“The Lunos Comfort Control Board 5/FK (Art. No. 040288) is an intelligent control unit for the fans of the Silvento ec series. As a further development of the previous models 5/EC-FK and 5/EC-FK 90, it combines extensive control and regulation functions on one board.Thanks to the integrated humidity and temperature sensors, the comfort control board enables stepless, demand-based ventilation control. In addition, numerous adjustment options are available for volume flows, run-on time, switch-on delay, and interval operation.The comfort control board is ideally suited for applications where automatic adjustment of the ventilation performance to the room air conditions is desired.Advantages at a glance✅ Suitable for the Silvento ec series✅ Integrated humidity and temperature sensor✅ Stepless comfort humidity-temperature control✅ Adjustable basic and demand ventilation✅ Selectable volume flows from 0 to 100 m³/h✅ Integrated filter change indicator✅ Run-on time and interval switching integrated✅ Expandable with additional modulesVolume flow settings✔ 0 m³/h✔ 15 m³/h✔ 20 m³/h✔ 30 m³/h✔ 40 m³/h✔ 45 m³/h✔ 50 m³/h✔ 60 m³/h✔ 100 m³/hThe specified volume flows refer to the installed condition with accessories.The actual volume flows can be adapted to site-specific conditions. Fine adjustment is possible via the optional WLAN module.Control functions✔ Stepless humidity control✔ Temperature-dependent ventilation control✔ Automatic adjustment of ventilation performance✔ Integrated filter change indicatorTime functionsRun-on time✔ 0 minutes✔ 15 minutes✔ 30 minutesInterval switching✔ 30 minutes demand ventilation every 4 hoursor✔ 15 minutes demand ventilation every 2 hoursSwitch-on delay✔ OFF✔ 45 seconds✔ 120 secondsSlot for additional modules✔ Radar-based motion detector 5/BM✔ Radio module FM-EO✔ WLAN module✔ Diagnostic cableTechnical details✔ Manufacturer: Lunos✔ Article number: 040288✔ Type: 5/FK✔ Application area: Silvento ec series✔ Sensors: Integrated humidity and temperature sensor✔ Volume flow range: 0–100 m³/h✔ Filter change indicator: IntegratedAreas of application– Bathroom– Guest WC– Utility rooms– Residential ventilation– New build and renovationThe Lunos Comfort Control Board 5/FK enables comfortable and energy-efficient control of Silvento ec fans. Thanks to the integrated humidity and temperature sensors, the ventilation performance is automatically adjusted to the room conditions, ensuring a pleasant indoor climate with low energy consumption.

For use in Shopware:Product information „Lunos 040287 Base Board 5/ZI for Silvento ec-V and Silvento ec-KL“The Lunos Base Board 5/ZI (Art. No. 040287) is used to control the fans of the Silvento ec series and combines, as a further development, the functions of the previous boards 5/EC-ZI and 5/EC-ZI 90 in a single version. It enables demand-based control of basic and demand ventilation as well as extensive adjustment options for volume flows, run-on times and interval switching.The board allows the selection of fixed defined volume flows and additionally offers the possibility to adapt the actual air volumes to object-specific conditions. Settings can be conveniently fine-tuned via an optional WLAN module.Advantages at a glance✅ Suitable for Silvento ec-V and Silvento ec-KL✅ Combines the functions of the predecessor boards 5/EC-ZI and 5/EC-ZI 90✅ Adjustable basic and demand ventilation✅ Volume flows selectable from 0 to 100 m³/h✅ Integrated filter change indicator✅ Adjustable run-on time✅ Interval switching integrated✅ Expandable with additional modulesVolume flow settings✔ 0 m³/h✔ 15 m³/h✔ 20 m³/h✔ 30 m³/h✔ 40 m³/h✔ 45 m³/h✔ 50 m³/h✔ 60 m³/h✔ 100 m³/hThe specified volume flows refer to the installed condition with accessories.In addition, the actual volume flows can be manually adjusted to the target values. Fine adjustment is possible via the optional WLAN module.Time functionsRun-on time✔ 0 minutes✔ 15 minutes✔ 30 minutesInterval switching✔ 30 minutes demand ventilation every 4 hoursor✔ 15 minutes demand ventilation every 2 hoursStart delay✔ OFF✔ 45 seconds✔ 120 secondsSlot for additional modules✔ Radar-based motion detector 5/BM✔ Radio module FM-EO✔ WLAN module✔ Diagnostic cableTechnical details✔ Manufacturer: Lunos✔ Article number: 040287✔ Type: 5/ZI✔ Application area: Silvento ec-V and Silvento ec-KL✔ Volume flow range: 0–100 m³/h✔ Filter change indicator: Integrated✔ Expandable with additional modulesAreas of application– Bathroom ventilation– WC ventilation– Utility rooms– Residential ventilation– New build and renovationThe Lunos Base Board 5/ZI offers extensive adjustment and control options for Silvento ec fans and enables demand-based, energy-efficient and comfortable ventilation control.

Product Information „Lunos 040092 Gesture Control 5/GS for Universal Control 5/UNI with Touch and Gesture Function“The Lunos Gesture Control 5/GS (Art. No. 040092) is a modern control unit for comfortable operation of ventilation systems. Thanks to touch and gesture control, compatible Lunos ventilation devices can be operated contactlessly or by fingertip tap.The control unit allows operation of up to two universal controls, Nexxt as well as Silvento ec systems. In conjunction with the Universal Control 5/UNI, the ventilation series e², ego and RA 15-60 can also be comfortably controlled.Additionally, the gesture control features integrated humidity and temperature sensors, supporting demand-based ventilation control.Advantages at a glance✅ Modern touch and gesture control✅ Contactless operation possible✅ Integrated humidity and temperature sensors✅ Control of up to two universal controls✅ Compatible with numerous Lunos ventilation systems✅ Comfortable operation and modern design✅ Installation in deep flush-mounted switch boxFunctions✔ Touch operation✔ Gesture control✔ Control of ventilation levels✔ Support for demand-based ventilation✔ Humidity detection✔ Temperature detectionCompatibility✔ Lunos Universal Control 5/UNI✔ Lunos e² series (via 5/UNI)✔ Lunos ego (via 5/UNI)✔ Lunos RA 15-60 (via 5/UNI)✔ Lunos Nexxt✔ Lunos Silvento ecNote:The Universal Control 5/UNI is not included in the delivery.Technical Details✔ Manufacturer: Lunos✔ Article number: 040092✔ Type: 5/GS✔ Product type: Gesture and touch controlElectrical Data✔ Operating voltage: 12 V DC✔ Functional voltage range: 0–10 V✔ Maximum operating switching current: 5 A✔ Maximum connection power: 60 WInstallation✔ Installation in deep flush-mounted switch box✔ Required installation depth: 66 mmEquipment✔ Integrated humidity sensor✔ Integrated temperature sensor✔ Touch control surface✔ Gesture recognitionFeatures✔ Comfortable operation✔ Modern control technology✔ Energy-efficient ventilation control✔ Space-saving flush-mounted installation✔ Original Lunos system accessoryAreas of Application– Living rooms– Bedrooms– Bathrooms– Decentralised residential ventilation– Smart home-related applications– New builds and renovationsThe Lunos Gesture Control 5/GS combines modern comfort functions with intelligent ventilation control. Through touch and gesture operation as well as integrated humidity and temperature sensors, it enables comfortable and demand-based control of various Lunos ventilation systems.

Produktinformationen „Lunos 040091 Funkmodul UNI-EO für Universalsteuerung 5/UNI-FT mit EnOcean-Funktechnologie“Das Lunos Funkmodul UNI-EO (Art.-Nr. 040091) erweitert die Universalsteuerung 5/UNI-FT um eine bidirektionale Funkkommunikation auf Basis der bewährten EnOcean-Technologie. Dadurch können kompatible Funksensoren, Funkschalter und weitere Lunos Funkkomponenten in das Lüftungssystem integriert werden.Das Modul verarbeitet empfangene Sensorwerte und Schaltbefehle, übermittelt Systemzustände und ermöglicht eine intelligente Vernetzung verschiedener Lüftungskomponenten. So können beispielsweise Lüfter der e²-Serie automatisch auf Bedarfslüftungen reagieren, die von anderen Lunos Geräten per Funk signalisiert werden.Vorteile auf einen Blick✅ Original Lunos Funkmodul✅ Bidirektionale EnOcean-Funktechnologie✅ Für Universalsteuerung 5/UNI-FT geeignet✅ Integration von Funksensoren und Funkschaltern✅ Erweiterung von Automatik- und Komfortfunktionen✅ Intelligente Vernetzung mehrerer Lüftungssysteme✅ Energieeffiziente FunkkommunikationFunktionen✔ Empfang und Verarbeitung von Sensorwerten✔ Empfang von Funk-Schaltbefehlen✔ Übertragung von Systemzuständen✔ Erweiterung bestehender Automatikfunktionen✔ Vernetzung verschiedener Lüftungskomponenten✔ Bedarfsgerechte Anpassung des LüftungsbetriebsIntelligente SystemkommunikationDas UNI-EO Modul sorgt für die kontinuierliche Kommunikation zwischen der Universalsteuerung und verbundenen Lunos Funkkomponenten. Dadurch können Lüftungsgeräte automatisch auf veränderte Raumbedingungen oder externe Steuerbefehle reagieren.Beispielsweise können angeschlossene Geräte der e²-Serie automatisch zusätzliche Zuluft bereitstellen, wenn ein vernetztes Abluftgerät eine erhöhte Bedarfslüftung anfordert.Technische Details✔ Hersteller: Lunos✔ Artikelnummer: 040091✔ Typ: UNI-EO✔ Produkttyp: FunkmodulKompatibilität✔ Lunos Universalsteuerung 5/UNI-FT✔ Lunos EnOcean Funksensoren✔ Lunos EnOcean Funkschalter✔ Weitere kompatible Lunos FunkkomponentenTechnologie✔ Bidirektionale Funkkommunikation✔ EnOcean-Funktechnologie✔ Automatische Datenübertragung zwischen SystemkomponentenEigenschaften✔ Erweiterung bestehender Lüftungssteuerungen✔ Flexible Nachrüstung möglich✔ Energieeffiziente Funktechnik✔ Wartungsarme Ausführung✔ Original Lunos SystemzubehörEinsatzbereiche– Wohnräume– Schlafzimmer– Badezimmer– Einfamilienhäuser– Mehrfamilienhäuser– Neubau und Sanierung– Kontrollierte WohnraumlüftungDas Lunos Funkmodul UNI-EO erweitert die Universalsteuerung 5/UNI-FT um moderne EnOcean-Funktechnik und ermöglicht die intelligente Vernetzung von Sensoren, Schaltern und Lüftungsgeräten. Dadurch entstehen komfortable, energieeffiziente und bedarfsgerechte Lüftungslösungen für moderne Wohngebäude.

Produktinformationen „Lunos 040096 Netzteil 5/NT100 für Universalsteuerung 5/UNI, 100 W, Hutschienenmontage“Das Lunos Netzteil 5/NT100 (Art.-Nr. 040096) ist ein leistungsstarkes Netzteil zur Versorgung der Lunos Universalsteuerung 5/UNI und angeschlossener Lüftungssysteme. Mit einer Ausgangsleistung von 100 Watt eignet es sich insbesondere für größere Lüftungsanlagen mit mehreren angeschlossenen Geräten.Das Netzteil liefert eine sichere 12 V DC SELV-Ausgangsspannung und wird platzsparend auf einer DIN-Hutschiene montiert. Dank des Weitbereichseingangs von 100 bis 240 V AC bei 50/60 Hz ist ein flexibler Einsatz in unterschiedlichen Installationsumgebungen möglich.Die robuste Ausführung macht das Netzteil zur idealen Lösung für den Einsatz in Schaltschränken, Elektroverteilern und zentralen Lüftungssteuerungen.Vorteile auf einen Blick✅ Original Lunos Netzteil✅ Hohe Leistung mit 100 W✅ Für Universalsteuerung 5/UNI geeignet✅ Sichere 12 V DC SELV-Ausgangsspannung✅ Montage auf DIN-Hutschiene✅ Weitbereichseingang 100–240 V AC✅ Ideal für größere Lüftungssysteme✅ Platzsparende Installation im SchaltschrankTechnische Details✔ Hersteller: Lunos✔ Artikelnummer: 040096✔ Typ: 5/NT100✔ Leistung: 100 W✔ Montageart: Hutschienenmontage (DIN-Schiene)Elektrische Daten✔ Eingangsspannung: 100–240 V AC, 50/60 Hz✔ Nennspannung: 230 V AC✔ Ausgangsspannung: 12 V DC SELVKompatibilität✔ Lunos Universalsteuerung 5/UNI✔ Lunos Smart Comfort Steuerungen✔ Weitere kompatible Lunos 12-V-SystemeEigenschaften✔ Sichere Schutzkleinspannung (SELV)✔ Hohe Leistungsreserve✔ Kompakte Bauform✔ Für Schaltschrankmontage geeignet✔ Original Lunos SystemzubehörEinsatzbereiche– Kontrollierte Wohnraumlüftung– Dezentrale Lüftungssysteme– Schaltschränke und Elektroverteiler– Wohn- und Gewerbegebäude– Neubau und SanierungDas Lunos Netzteil 5/NT100 stellt die zuverlässige Stromversorgung leistungsstarker Lüftungssysteme sicher. Die Kombination aus hoher Ausgangsleistung, sicherer SELV-Spannung und einfacher Hutschienenmontage macht es zur idealen Energieversorgung für zentrale Lunos Steuerungen und größere Lüftungsanlagen.

Produktinformationen „Lunos 040089 Universalsteuerung 5/UNI-FT für e², ego und RA 15-60 mit Feuchte-/Temperatursensor“Die Lunos Universalsteuerung 5/UNI-FT (Art.-Nr. 040089) ist die zentrale Steuerungseinheit für dezentrale Lüftungssysteme der Serien e², e²60, e²kurz, e²mini, ego sowie für den Radial-Ablüfter RA 15-60. Dank integrierter Feuchte- und Temperatursensoren ermöglicht sie eine automatische, bedarfsgerechte Lüftungsregelung und trägt zu einem angenehmen Raumklima bei.Die Steuerung verfügt über eine integrierte Zeitnachlauffunktion für den Intervallbetrieb sowie LED-Anzeigen für Filterwechsel und Sommerlüftung. Darüber hinaus bildet sie die Grundlage für die Erweiterung des Systems mit der Touch Air Comfort (TAC) Bedienung.Vorteile auf einen Blick✅ Zentrale Steuerung für verschiedene Lunos Lüftungssysteme✅ Integrierter Feuchte- und Temperatursensor✅ Automatische bedarfsgerechte Lüftungsregelung✅ Zeitnachlauf für Intervallbetrieb✅ LED-Anzeige für Filterwechsel✅ Anzeige der Sommerlüftungsfunktion✅ Erweiterbar mit Touch Air Comfort (TAC)Kompatibilität✔ Lunos e²✔ Lunos e²60✔ Lunos e²kurz✔ Lunos e²mini✔ Lunos ego✔ Lunos RA 15-60Funktionen✔ Automatische Feuchteregelung✔ Temperaturabhängige Steuerung✔ Zeitnachlaufmodul integriert✔ Intervallbetrieb✔ Sommerlüftungsfunktion✔ Filterwechselanzeige per LEDTechnische Details✔ Hersteller: Lunos✔ Artikelnummer: 040089✔ Typ: 5/UNI-FT✔ Betriebsspannung: 12 V DC✔ Funktionsspannungsbereich: 0–10 V✔ Maximaler Schaltstrom: 5 A✔ Maximale Anschlussleistung: 60 WMontage✔ Einbau in tiefe Unterputz-Schalterdose (66 mm)HinweisFür die Stufenumschaltung ist ein zusätzlicher Schalter erforderlich, beispielsweise der Lunos 5/W2U.Eigenschaften✔ Zentrale Steuerung mehrerer Lüftungssysteme✔ Energieeffiziente bedarfsgerechte Regelung✔ Erweiterbar durch Zubehör✔ Einfache Bedienung✔ Original Lunos SystemzubehörEinsatzbereiche– Dezentrale Wohnraumlüftung– Wohnhäuser und Wohnungen– Neubau und Sanierung– Feuchtegeregelte Lüftungssysteme– Komfortlüftung mit WärmerückgewinnungDie Lunos Universalsteuerung 5/UNI-FT ermöglicht die komfortable und bedarfsgerechte Steuerung verschiedener Lunos Lüftungssysteme. Durch die integrierten Feuchte- und Temperatursensoren sowie die Zeitnachlauffunktion sorgt sie für eine effiziente Lüftung und ein angenehmes Raumklima.

Produktinformationen „Lunos 040001 Hutschienenclip HC für 5/UNI Steuerung und 5/ACM“Der Lunos Hutschienenclip HC (Art.-Nr. 040001) dient zur einfachen und sicheren Montage der Universalsteuerung 5/UNI sowie des Zusatzmoduls 5/ACM auf einer DIN-Hutschiene.Durch die passgenaue Ausführung ermöglicht der Hutschienenclip eine schnelle Installation der Steuerungs- und Erweiterungsmodule in Verteilerschränken und Schaltsystemen. Die Befestigung sorgt für einen sicheren Halt und erleichtert zugleich Wartungs- und Servicearbeiten.Vorteile auf einen Blick✅ Original Lunos Zubehör✅ Für DIN-Hutschienenmontage geeignet✅ Passend für 5/UNI Universalsteuerung✅ Passend für 5/ACM Zusatzmodul✅ Einfache und schnelle Montage✅ Sicherer Halt im Schaltschrank✅ Wartungsfreundliche BefestigungslösungTechnische Details✔ Hersteller: Lunos✔ Artikelnummer: 040001✔ Typ: HC✔ Anwendung: Hutschienenclip zur Befestigung von Steuerungsmodulen✔ Montageart: DIN-HutschieneKompatibilität✔ Lunos 5/UNI Universalsteuerung✔ Lunos 5/ACM ZusatzmodulEigenschaften✔ Einfache Installation auf Tragschienen✔ Passgenaue Befestigung✔ Robuste Ausführung✔ Wartungsfreundlich✔ Original Lunos SystemzubehörEinsatzbereiche– Lüftungssteuerungen– Schaltschränke– Elektroverteiler– Wohnraumlüftung– Neubau und SanierungDer Lunos Hutschienenclip HC ermöglicht die sichere und professionelle Montage von Lunos Steuerungs- und Erweiterungsmodulen auf DIN-Hutschienen und sorgt für eine ordentliche Integration in Schaltschränke und Verteilersysteme.

Product Information „Lunos 040000 CO₂ Sensor SCO-TAC for Touch Air Comfort Control“The Lunos CO₂ Sensor SCO-TAC (Art. No. 040000) is an optional carbon dioxide sensor for expanding the Touch Air Comfort (TAC) control. It continuously monitors the CO₂ concentration in the indoor air and supports demand-driven regulation of the ventilation system.By detecting the air quality, the ventilation control can automatically respond to elevated CO₂ levels and adjust the air exchange accordingly. This contributes to a pleasant indoor climate and consistently high air quality.Advantages at a glance✅ Original Lunos accessory✅ CO₂ measurement for air quality monitoring✅ Suitable for Touch Air Comfort (TAC) control✅ Supports demand-driven ventilation control✅ Automatic adjustment of ventilation performance possible✅ Improvement of indoor climate✅ Easy integration into existing systemsFunction✔ Detection of CO₂ concentration in indoor air✔ Support of automatic ventilation control✔ Optimisation of indoor air qualityTechnical Details✔ Manufacturer: Lunos✔ Article number: 040000✔ Type: SCO-TAC✔ Product type: CO₂ sensorCompatibility✔ Lunos Touch Air Comfort (TAC) controlFeatures✔ Continuous air quality monitoring✔ Supports energy-efficient ventilation operation✔ Compact design✔ Maintenance-friendly✔ Original Lunos system accessoryAreas of Application– Living rooms– Bedrooms– Children’s rooms– Offices and workspaces– Meeting rooms– Controlled residential ventilationThe Lunos CO₂ Sensor SCO-TAC expands the Touch Air Comfort control with intelligent air quality monitoring. By automatically detecting the CO₂ concentration, it supports demand-driven and comfortable ventilation control for a healthy indoor climate.

Product Information „Lunos 039974 Power Supply 5/NT60, 60 W for Universal Control 5/UNI“The Lunos Power Supply 5/NT60 (Item No. 039974) is a powerful 60 W power supply unit for powering the Lunos Universal Control 5/UNI. It has been specially developed for use in Lunos ventilation systems and is suitable for mounting on a DIN rail in the control cabinet or distribution system.With an output voltage of 12 V DC SELV, the power supply can supply several ventilation units simultaneously and enables the safe operation of larger ventilation systems.Advantages at a glance✅ Original Lunos accessory✅ Suitable for the Universal Control 5/UNI✅ Power 60 W✅ Mounting on DIN rail✅ Safe 12 V DC SELV output voltage✅ Compact design✅ Ideal for central ventilation controlsTechnical details✔ Manufacturer: Lunos✔ Item number: 039974✔ Type: 5/NT60✔ Power: 60 W✔ Mounting: DIN rail / mounting rail✔ Input voltage: 100–240 V AC✔ Output voltage: 12 V DC SELV✔ Operating switching current: Max. 1.5 AMaximum connectable devicesWhen using the power supply, the maximum number of devices that can be connected is:✔ 5 × Lunos ego✔ 10 × Lunos e² (5 device pairings)✔ 2 × Lunos RA 15-60Features✔ Reliable power supply✔ Designed for continuous operation✔ Easy integration into distribution cabinets✔ Compatible with Lunos control systems✔ Low-maintenance designAreas of application– Controlled residential ventilation– Lunos e² systems– Lunos ego systems– Lunos RA 15-60 systems– New builds and renovations– Central control unitsThe Lunos Power Supply 5/NT60 ensures reliable power supply for Lunos ventilation systems and is the ideal complement to the Universal Control 5/UNI for larger systems with multiple connected ventilation units.

Product Information “Lunos 039946 TAC Touch Air Comfort Control for e², ego, RA 15-60, AB30/60 and Silvento”The Lunos Touch Air Comfort (TAC) control (Art. no. 039946) is the central control unit for decentralised ventilation systems from Lunos. It enables comfortable operation and intelligent regulation of ventilation devices from the e², e²mini, ego, RA 15-60, AB30/60 series as well as Silvento in conjunction with the additional module 5/ACM.The system combines modern touch operation with intelligent sensors and extensive automation functions. All settings can be conveniently made and monitored via the energy-saving E-Ink display. Thanks to the integrated humidity and temperature sensor as well as the optional CO₂ sensor, ventilation can be controlled on demand and energy-efficiently.Advantages at a glance✅ Central control for numerous Lunos ventilation systems✅ Modern touch panel with E-Ink display✅ Integrated humidity and temperature sensor✅ Optionally expandable with CO₂ sensor✅ Individual time programmes and automatic functions✅ Data logging and USB interface✅ Suitable for new builds and renovations✅ Expandable via universal controls 5/UNICompatibility✔ Lunos e²✔ Lunos e²mini✔ Lunos ego✔ Lunos RA 15-60✔ Lunos AB30/60✔ Lunos Silvento (via additional module 5/ACM)Functions✔ Touch operation with E-Ink display✔ Automatic humidity and temperature control✔ Optional CO₂-controlled ventilation✔ Individual time programmes✔ Summer ventilation✔ Night mode✔ Absence mode✔ Party mode✔ Cross ventilation✔ Filter change indicator✔ Fault diagnosisIntelligent Sensor TechnologyThe control unit features an integrated humidity and temperature sensor for automatic adjustment of the ventilation output.Optionally, the CO₂ sensor SCO-TAC can be added to additionally regulate ventilation based on air quality.Control Options✔ Manual limit value setting✔ Automatic limit value control✔ Individual comfort schedules✔ Landlord protection to restrict certain functions✔ Configuration via planning code or menu navigationData Recording and Maintenance✔ Data logging of sensor values and operating times✔ Reading via USB interface✔ Firmware and software updates via USB✔ Visual and acoustic alerts for filter changes or faultsExpansion Options✔ Connection of additional universal controls 5/UNI✔ Three switching inputs for external control elements✔ Connection of 230 V devices via 5/ACM moduleTechnical Data✔ Supply voltage: 100–240 V AC, 50–60 Hz✔ Device voltage: 12 V DC SELV✔ Protection class: IP22✔ Installation type: Horizontal✔ Recommended mounting height: 1.4–1.6 mTechnical Details✔ Manufacturer: Lunos✔ Article number: 039946✔ Type: TAC Touch Air Comfort✔ Product type: Central ventilation controlControl Unit Dimensions✔ Height: 155 mm✔ Width: 97 mm✔ Depth: 20 mmElectronics Box Dimensions✔ Height: 143 mm✔ Width: 70 mm✔ Depth: 75 mmFeatures✔ Intuitive operation✔ Energy-efficient control✔ Central control of multiple ventilation systems✔ Extensive automation functions✔ Original Lunos system componentAreas of Application– Apartments– Single-family houses– Multi-family houses– Living and sleeping rooms– Bathrooms– New builds and renovationsThe Lunos TAC Touch Air Comfort control combines the control of various Lunos ventilation systems in one central control unit. Thanks to intelligent sensors, modern touch operation and extensive automatic functions, it ensures a comfortable, energy-efficient and healthy indoor climate.

Product Information „Lunos 039840 Series Switch 5/W2FK for FK Control Silvento, white“The Lunos Series Switch 5/W2FK (Art. No. 039840) was specially developed for the control of humidity- and temperature-controlled Silvento ec fans. It enables convenient operation of the ventilation functions and is designed for installation in a standard flush-mounted switch box.The series switch features two rocker switches and is suitable for controlling Silvento V-ec and Silvento KL-ec fans with comfort control board. The switch functions allow the automatic humidity control to be deactivated during the heating period and switching between basic and demand ventilation.Advantages at a glance✅ Original Lunos accessory✅ Suitable for Silvento V-ec and KL-ec✅ Two switching functions in one device✅ Installation in standard switch box✅ Easy operation via two rocker switches✅ Ideal for comfort control boards with FK controlFunctions✔ Deactivation of humidity control during the heating period✔ Switching between basic ventilation and demand ventilation✔ Convenient control of humidity- and temperature-controlled fansTechnical Details✔ Manufacturer: Lunos✔ Article number: 039840✔ Type: 5/W2FK✔ Application: FK control for Silvento ec fans✔ Design: Series switch with two rocker switches✔ Installation: Flush-mounted in standard switch box✔ Colour: WhiteCompatibility✔ Lunos Silvento V-ec with comfort control board✔ Lunos Silvento KL-ec with comfort control boardAreas of Application– Bathroom– Guest WC– Utility rooms– Residential ventilation– Humidity- and temperature-controlled ventilation systemsThe Lunos Series Switch 5/W2FK enables convenient and demand-oriented control of Silvento ec fans with FK control. By switching between basic and demand ventilation as well as targeted deactivation of humidity control, it offers additional flexibility for daily operation.

Product Information „Lunos 036641 Switch 5/W for Light and Fan Control, Double-Pole, White“The Lunos Switch 5/W (Art. No. 036641) is a double-pole rocker switch for controlling lighting and ventilation devices. It is particularly suitable for fans with overrun function, devices with base load operation, or applications with light coupling in single-stage operation.Thanks to the classic ON/OFF switching, the switch allows simple and reliable operation. Installation is carried out in a standard commercial switch box, enabling straightforward integration into existing electrical installations.Advantages at a Glance✅ Original Lunos switch✅ Double-pole ON/OFF switching✅ Suitable for light and fan control✅ Ideal for fans with overrun✅ Suitable for base load operation✅ Supports light coupling in single-stage operation✅ Installation in standard switch boxFunctions✔ Switching fans on and off✔ Switching lighting on and off✔ Control of fans with overrun control✔ Usable for light couplingTechnical Details✔ Manufacturer: Lunos✔ Article number: 036641✔ Type: 5/W✔ Switch type: Rocker switch✔ Version: Double-poleInstallation✔ Installation in standard flush-mounted switch box✔ Easy installationApplication Areas✔ Fans with overrun control✔ Fans with base load operation✔ Single-stage fan controls✔ Light-fan combinationsDesign✔ Series: Paris✔ Colour: WhiteFeatures✔ Robust design✔ Maintenance-free✔ Easy operation✔ Suitable for residential and commercial applications✔ Original Lunos system accessoryAreas of Use– Bathrooms– Guest WCs– Utility rooms– Kitchens– Residential buildings– New builds and renovationsThe Lunos Switch 5/W offers a reliable solution for controlling lighting and ventilation. Due to its double-pole design, it is especially suitable for fans with overrun, base load operation, or light coupling and can be easily integrated into existing installations.

Produktinformationen „Lunos 039973 Netzteil 5/NT18, 18 W für ego, e² und RA 15-60, Unterputzmontage“Das Lunos Netzteil 5/NT18 (Art.-Nr. 039973) ist ein kompaktes 12-V-SELV-Netzteil zur Stromversorgung von Lüftungssystemen der Serien ego, e² und RA 15-60. Es wurde speziell für den Einbau in tiefe Unterputzdosen mit 66 mm Einbautiefe entwickelt und eignet sich ideal für platzsparende Installationen.Dank des Weitbereichseingangs von 100 bis 240 V AC kann das Netzteil flexibel eingesetzt werden. Die sichere 12 V DC SELV-Ausgangsspannung gewährleistet einen normgerechten Betrieb der angeschlossenen Lüftungsgeräte.Mit einer Leistung von 18 W können bis zu 3 ego, 6 e² (3 Gerätepaare) oder 1 RA 15-60 versorgt werden.Vorteile auf einen Blick✅ Original Lunos Netzteil✅ Kompakte Bauform für Unterputzmontage✅ Passend für tiefe Schalterdosen ab 66 mm✅ Sichere 12 V DC SELV-Ausgangsspannung✅ Weitbereichseingang 100–240 V AC✅ Für mehrere Lüftungsgeräte geeignet✅ Ideal für Universal- und GestensteuerungenTechnische Details✔ Hersteller: Lunos✔ Artikelnummer: 039973✔ Typ: 5/NT18✔ Leistung: 18 W✔ Eingangsspannung: 100–240 V AC✔ Ausgangsspannung: 12 V DC (SELV)✔ Maximaler Ausgangsstrom: 1,5 AKompatibilität✔ Lunos ego (bis 3 Geräte)✔ Lunos e² (bis 6 Geräte bzw. 3 Paare)✔ Lunos RA 15-60Montage✔ Einbau in tiefe Unterputzdose✔ Geeignet für 66 mm Einbautiefe✔ Platzsparende InstallationAbmessungen✔ Durchmesser: 55 mm✔ Höhe: 25 mm✔ Erforderliche Einbautiefe: 66 mmEigenschaften✔ Kompakte Bauform✔ Sichere SELV-Spannungsversorgung✔ Hohe Betriebssicherheit✔ Einfache Installation✔ Original Lunos SystemzubehörEinsatzbereiche– Dezentrale Wohnraumlüftung– Lunos ego Systeme– Lunos e² Systeme– Lunos RA 15-60– Neubau und Sanierung– UnterputzinstallationenDas Lunos Netzteil 5/NT18 ermöglicht die zuverlässige Stromversorgung von Lunos Lüftungssystemen bei minimalem Platzbedarf. Die kompakte Bauweise macht es zur idealen Lösung für den Einbau in tiefe Unterputzdosen.

Product Information „Lunos 039972 Switch 5/W2U for Universal Control 5/UNI, printed“The Lunos Switch 5/W2U (Item No. 039972) is a control switch specially developed for the Universal Control 5/UNI for convenient operation of ventilation systems. It allows the selection of up to four ventilation levels as well as the activation or deactivation of summer ventilation.The printed switch enables simple and clear operation of the connected ventilation system and is suitable for various Lunos ventilation systems.Advantages at a glance✅ Original Lunos control element✅ Suitable for Universal Control 5/UNI✅ Selection of up to four ventilation levels✅ Activation and deactivation of summer ventilation✅ Simple and intuitive operation✅ Printed switch surface✅ Compatible with various Lunos ventilation systemsFunctions✔ Selection of up to four ventilation levels✔ Control of ventilation performance✔ Activation of summer ventilation✔ Deactivation of summer ventilationTechnical Details✔ Manufacturer: Lunos✔ Item number: 039972✔ Type: 5/W2U✔ Application: Control element for Universal Control 5/UNI✔ Version: PrintedCompatibility✔ Lunos Universal Control 5/UNI✔ LUNOMAT✔ Lunos e² Series✔ Lunos ego✔ Lunos RA 15-60Features✔ Easy operation✔ Clear function labelling✔ Robust design✔ Maintenance-free✔ Original Lunos system accessoryAreas of Application– Decentralised residential ventilation– Houses and apartments– New builds and renovations– Ventilation systems with Universal Control 5/UNIThe Lunos Switch 5/W2U enables convenient control of various ventilation systems and offers simple selection of the desired ventilation level as well as operation of the summer ventilation function.