Brandschutz

Disc valve, fire protection WBV 10 maintenance-free, DN100Features:Quality Made in GermanyDisc valve with fire protection - for easy ventingStepless regulation of the air flow by means of a rotating valve disc. Simple installation with installation frame. Installation frame and valve housing connected with bayonet lock. Installation inside or outside fire-resistant shaft walls.Attractive design - compatible with any interior style Fire resistance class K 90 - 18017, suitable for continuous operation.Description:Disc valves for ventilation. Installation frame and valve housing connected with a bayonet catch. Stepless regulation of the air flow by means of a rotating valve disc. Installation with mounting frame. Fire resistance class K 90 - 18017. Installation inside and outside fire-resistant shaft walls. Type series WBV: With maintenance-free fire protection shut-off device and hermetically sealed release device. TB series: Locking of the shut-off device by cadmium-free fusible link. Release of the fusible link at 72 °C or manually. Recommended accessories: Grease trap filter element FFE for use in rooms with greasy exhaust air (kitchens, etc.).Article: WBV 10, Air direction: venting, Material: sheet steel, powder-coated, Colour: pure white, similar to RAL 9010, Weight: 0.6 kg, Weight with packaging: 0.62 kg, Fire protection: yes, Suitable for nominal width: 100 mm, Width: 134 mm, Height: 134 mm, Depth: 83 mm, Width with packaging: 155 mm, Height with packaging: 155 mm, Depth with packaging: 150 mm, Approval number: Z-41.3-561, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Fire protection ceiling penetration seal TS 18 for exhaust air systems ER, DN 100Features:Quality Made in GermanyFire protection ceiling penetration seal - for easy installationWith continuous free cross-section and smooth inner surfaces. Maintenance-free. Fire resistance class K90-18017. For ventilation and extraction. Flush-mounted installation on the ceiling.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Fire protection ceiling penetration seal for extract air systems ER. With continuous free cross-section and smooth inner surfaces. General building authority approval, approval number Z-41.3-556. Approval certificate at _www.maico-ventilatoren.com. Fire resistance class K90-18017. ##########_3__: TS 18 DN 100, Air direction: Ventilation, Installation location: Ceiling, Installation type: Flush-mounted, Material: Sheet steel, Weight: 0.895 kg, Weight with packaging: 0.94 kg, Fire protection: yes, Suitable for nominal width: 100 mm, Width: 226 mm, Height: 152 mm, Depth: 126 mm, Width with packaging: 227 mm, Height with packaging: 153 mm, Depth with packaging: 130 mm, Approval number: Z-41.3-556, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Disc valve, fire protection WBV 12 maintenance-free, DN125Features:Quality Made in GermanyDisc valve with fire protection - for easy ventingStepless regulation of the air flow thanks to the rotating valve disc. Simple installation with installation frame. Installation frame and valve housing connected with bayonet lock. Installation inside or outside fire-resistant shaft walls.Attractive design - compatible with any interior style Fire resistance class K 90 - 18017, suitable for continuous operation.Description:Disc valves for ventilation. Installation frame and valve housing connected with a bayonet catch. Stepless regulation of the air flow by means of a rotating valve disc. Installation with mounting frame. Fire resistance class K 90 - 18017. Installation inside and outside fire-resistant shaft walls. Type series WBV: With maintenance-free fire protection shut-off device and hermetically sealed release device. TB series: Locking of the shut-off device by cadmium-free fusible link. Release of the fusible link at 72 °C or manually. Recommended accessories: Grease trap filter element FFE for use in rooms with greasy exhaust air (kitchens, etc.).Article: WBV 12, Air direction: venting, Material: sheet steel, powder-coated, Colour: pure white, similar to RAL 9010, Weight: 0.78 kg, Weight with packaging: 0.8 kg, Fire protection: yes, Suitable for nominal width: 125 mm, Width: 162 mm, Height: 162 mm, Depth: 88 mm, Width with packaging: 190 mm, Height with packaging: 190 mm, Depth with packaging: 150 mm, Approval number: Z-41.3-561, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Surface-mounted fan ER-APB 60 61 m3/h, fire protection, standardFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed-controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Standard version: ER 100: Speed controllable. ER 60: Not speed controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60, Version: Standard version, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.87 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.12 kg, Weight with packaging: 2.68 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 43 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

Fire protection ceiling penetration seal TS 18 for exhaust air systems ER, DN 140Features:Quality Made in GermanyFire protection ceiling penetration seal - for easy installationWith continuous free cross-section and smooth inner surfaces. Maintenance-free. Fire resistance class K90-18017. For ventilation and extraction. Flush-mounted installation on the ceiling.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Fire protection ceiling penetration seal for extract air systems ER. With continuous free cross-section and smooth inner surfaces. General building authority approval, approval number Z-41.3-556. Approval certificate at _www.maico-ventilatoren.com. Fire resistance class K90-18017. ##########_3__: TS 18 DN 140, Air direction: Ventilation, Installation location: Ceiling, Installation type: Flush-mounted, Material: Sheet steel, Weight: 1.37 kg, Weight with packaging: 1.42 kg, Fire protection: yes, Suitable for nominal width: 140 mm, Width: 273 mm, Height: 167 mm, Depth: 173 mm, Width with packaging: 274 mm, Height with packaging: 168 mm, Depth with packaging: 174 mm, Approval number: Z-41.3-556, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Fire protection ceiling penetration seal TS 18 for exhaust air systems ER, DN 160Features:Quality Made in GermanyFire protection ceiling penetration seal - for easy installationWith continuous free cross-section and smooth inner surfaces. Maintenance-free. Fire resistance class K90-18017. For ventilation and extraction. Flush-mounted installation on the ceiling.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Fire protection ceiling penetration seal for extract air systems ER. With continuous free cross-section and smooth inner surfaces. General building authority approval, approval number Z-41.3-556. Approval certificate at _www.maico-ventilatoren.com. Fire resistance class K90-18017. Wartungsfrei.Artikel: TS 18 DN 160, Air direction: Ventilation, Installation location: Ceiling, Installation type: Flush-mounted, Material: Sheet steel, Weight: 2.08 kg, Weight with packaging: 2.1 kg, Fire protection: yes, Suitable for nominal width: 160 mm, Width: 295 mm, Height: 180 mm, Depth: 195 mm, Width with packaging: 296 mm, Height with packaging: 181 mm, Depth with packaging: 196 mm, Approval number: Z-41.3-556, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Surface-mounted fan ER-APB 100 VZ 100 m3/h, fire protection, delay timeFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Delay timer, run-on time and switch-on delay With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed-controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with delay timer: Switch-on delay approx. 50 sec. Run-on time approx. 6 min. Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100 VZ, Version: Delay timer, Delivery volume: 100 m3/h, Speed: 1850 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.28 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 29 W, IMax: 0.15 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.09 kg, Weight with packaging: 2.65 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 49 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Exhaust air element, surface-mounted Centro-E-APB electric, for central ventilationFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Exhaust air telemet with electronic actuator. Can be installed in all DIN VDE 0100-701 elements, even with water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line. Electrical plug-in connection for quick installation. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Exhaust air element Centro-E-APB - Electric version: Exhaust air element with electrothermal actuator. For basic and on-demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-E-APB exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even with water jets. Protection class II. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-E-APB, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Centralised, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 1.45 kg, Weight with packaging: 2.01 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 26 dB(A) / 33 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Surface-mounted fan ER-APB 60 VZ 61 m3/h, fire protection, delay timeFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Delay timer with switch-on delay and run-on time. With fire protection metal shut-off damper to prevent fire transmission. Not speed-controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connector to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with delay timer: Switch-on delay approx. 50 sec. Run-on time approx. 6 min. Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 VZ, Version: Delay timer, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.62 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.13 kg, Weight with packaging: 2.69 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release device, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 43 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 100 G 100 m3/h, fire protection, base loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Switching to full load possible. On/off of base load possible with additional switch. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with base load switching: The appliance runs in continuous operation at 35 m3/h. The full load level can be switched on/off using a light switch or separate switch. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100 G, Version: Base load circuit, Delivery volume: 35 m3/h / 100 m3/h, Speed: 900 1/min / 1850 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.47 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 28.5 W, IMax: 0.09 A / 0.15 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.09 kg, Weight with packaging: 2.65 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 33 dB(A) / 49 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 60 G 61 m3/h, fire protection, base loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Switching to full load possible. An additional switch can be used to switch the base load on or off. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with base load switching: The appliance runs in continuous operation at 35 m3/h. The full load level can be switched on/off using a light switch or separate switch. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 G, Version: Base load circuit, Delivery volume: 35 m3/h / 61 m3/h, Speed: 900 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.62 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.14 kg, Weight with packaging: 2.7 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 33 dB(A) / 43 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 100 F 100 m3/h, fire protection, lightFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via light control. Switch-on delay and run-on time. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Electrical plug-in connection for quick and easy installation. Not speed controllable. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Switching variant: With an additional switch, the fan can be switched off independently of the room lighting (see wiring diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100 F, Version: Light control, Delivery volume: 100 m3/h, Speed: 1850 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -21.24 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 29 W, IMax: 0.15 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.1 kg, Weight with packaging: 2.66 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 49 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 60 F 61 m3/h, fire protection, light controlFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via light control. Switch-on delay and run-on time. The device can be switched off independently of the room lighting using an additional switch. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Cannot be speed-controlled. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Switching variant: With an additional switch, the fan can be switched off independently of the room lighting (see wiring diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016 All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 F, Version: Light control, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -19.51 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.13 kg, Weight with packaging: 2.69 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release device, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 43 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Fire protection ceiling penetration seal TS 18 for exhaust air systems ER, DN 180Features:Quality Made in GermanyFire protection ceiling penetration seal - for easy installationWith continuous free cross-section and smooth inner surfaces. Maintenance-free. Fire resistance class K90-18017. For ventilation and extraction. Flush-mounted installation on the ceiling.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Fire protection ceiling penetration seal for extract air systems ER. With continuous free cross-section and smooth inner surfaces. General building authority approval, approval number Z-41.3-556. Approval certificate at _www.maico-ventilatoren.com. Fire resistance class K90-18017. ##########_3__: TS 18 DN 180, Air direction: Ventilation, Installation location: Ceiling, Installation type: Flush-mounted, Material: Sheet steel, Weight: 2.22 kg, Weight with packaging: 2.3 kg, Fire protection: yes, Suitable for nominal width: 180 mm, Width: 320 mm, Height: 190 mm, Depth: 220 mm, Width with packaging: 321 mm, Height with packaging: 191 mm, Depth with packaging: 222 mm, Approval number: Z-41.3-556, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Surface-mounted fan ER-APB 100 100 m3/h, fire protection, standardFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Standard version: ER 100: Speed controllable. ER 60: Not speed controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100, Version: Standard version, Delivery volume: 100 m3/h, Speed: 1850 1/min, Air direction: Ventilation, Speed controllable: yes, SEC average: -6.47 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 28.5 W, IMax: 0.15 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.08 kg, Weight with packaging: 2.64 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 49 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

Fire protection ceiling penetration seal TS 18 for exhaust air systems ER, DN 200Features:Quality Made in GermanyFire protection ceiling penetration seal - for easy installationWith continuous free cross-section and smooth inner surfaces. Maintenance-free. Fire resistance class K90-18017. For ventilation and extraction. Flush-mounted installation on the ceiling.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Fire protection ceiling penetration seal for extract air systems ER. With continuous free cross-section and smooth inner surfaces. General building authority approval, approval number Z-41.3-556. Approval certificate at _www.maico-ventilatoren.com. Fire resistance class K90-18017. ##########_3__: TS 18 DN 200, Air direction: Ventilation, Installation location: Ceiling, Installation type: Flush-mounted, Material: Sheet steel, Weight: 2.755 kg, Weight with packaging: 2.815 kg, Fire protection: yes, Suitable for nominal width: 200 mm, Width: 342 mm, Height: 202 mm, Depth: 242 mm, Width with packaging: 345 mm, Height with packaging: 203 mm, Depth with packaging: 243 mm, Approval number: Z-41.3-556, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Exhaust air element, surface-mounted Centro-H-APB humidity-controlledFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against humidity, unpleasant odours and mouldBarrier-free product, as on/off via automatic humidity sensor. Uncomplicated one-man installation with standard tools - low-maintenance device. Adjustable relative humidity. Manual operation possible. Full load can be switched on manually with run-on time. Can be installed in all DIN VDE 0100-701 elements, even with water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line. Electrical plug-in connection for quick installation. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Centro-H-APB extract air element - version with automatic humidity control: extract air element with electrothermal actuator. For basic and demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-H-APB exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even with water jets. Protection class II. Barrier-free product, as it switches on/off automatically. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Valve monitors the room humidity independently and automatically switches to ventilation on demand. Manual operation possible via a switch, e.g. switching on the ventilation on demand using a light switch. Standard switching: Exhaust air element closed Operation in basic ventilation, humidity control is active when the switch-on point is exceeded - operation in demand ventilation, when the switch-off point is undershot - operation in basic ventilation. Other switching variants: manual activation of demand ventilation. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-H-APB, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3.5 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.492 kg, Weight with packaging: 2.034 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 340 mm, Depth with packaging: 255 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min - run-on time available when using an optional switch (z.B. Light switch) available, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Nominal width: 75 mm / 80 mm

Surface-mounted fan ER-APB 100 H 100 m3/h, fire protection Humidity base loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity control. Switch-on point can be set by relative humidity with jumper. Manual switch-on of full load with run-on time. Fan runs in base load operation. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Electrical plug-in connection for quick and easy installation. Not speed controllable. Not suitable for second room ventilation. Can also be installed in the event of water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with humidity control and base load switching: Barrier-free product, as automatic switching on/off via humidity control is possible. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Fan monitors the room air humidity independently and vents automatically. Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. switching on the full load using a light switch. Standard switching: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: Fan operation with or without base load operation, manual activation of full load, switching the fan on or off using a switch. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. The fan runs until the humidity in the room has fallen below the switch-off humidity. After 60 minutes at the latest, the run-on time is activated and the fan is then switched off. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100 H, Version: Humidity control, Delivery volume: 35 m3/h / 100 m3/h, Speed: 900 1/min / 1850 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -21.82 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 29 W, IMax: 0.09 A / 0.15 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.1 kg, Weight with packaging: 2.66 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min / Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 33 dB(A) / 49 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal width: 75 mm / 80 mm

Surface-mounted fan ER-APB 60 H 61 m3/h, fire protection, basic humidity loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against humidity, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity control. Relative humidity can be set with a jumper for switch-on point. Switch-off point is fixed value. Manual switch-on at full load possible and with run-on time. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Electrical plug-in connection for quick and easy installation. Not speed controllable. Not suitable for second room ventilation. Can also be installed in the event of water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with humidity control and base load switching: Barrier-free product, as automatic switching on/off via humidity control is possible. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Fan monitors the room air humidity independently and vents automatically. Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. switching on the full load using a light switch. Standard switching: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: Fan operation with or without base load operation, manual activation of full load, switching the fan on or off using a switch. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. The fan runs until the humidity in the room has fallen below the switch-off humidity. After 60 minutes at the latest, the run-on time is activated and the fan is then switched off. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016 All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 H, Version: Humidity control, Delivery volume: 35 m3/h / 61 m3/h, Speed: 900 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -20.23 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.17 kg, Weight with packaging: 2.73 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min / Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 33 dB(A) / 43 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal width: 75 mm / 80 mm

Disc valve, fire protection TB 10 DN100Features:Quality Made in GermanyDisc valve with fire protection - for simple ventilation and air extractionStepless regulation of the air flow thanks to the rotating valve disc. Simple installation with mounting frame. Installation frame and valve housing connected with bayonet lock. Installation inside or outside fire-resistant shaft walls.Attractive design - compatible with any interior style Fire resistance class K 90 - 18017, suitable for continuous operation.Description:Disc valves for ventilation. Installation frame and valve housing connected with a bayonet catch. Stepless regulation of the air flow by means of a rotating valve disc. Installation with mounting frame. Fire resistance class K 90 - 18017. Installation inside and outside fire-resistant shaft walls. Type series WBV: With maintenance-free fire protection shut-off device and hermetically sealed release device. TB series: Locking of the shut-off device by cadmium-free fusible link. Release of the fusible link at 72 °C or manually. Recommended accessories: Grease trap filter element FFE for use in rooms with greasy exhaust air (kitchens, etc.).Article: TB 10, Air direction: venting, Material: sheet steel, powder-coated, Colour: pure white, similar to RAL 9010, Weight: 0.45 kg, Weight with packaging: 0.465 kg, Fire protection: yes, Suitable for nominal width: 100 mm, Width: 134 mm, Height: 134 mm, Depth: 83 mm, Width with packaging: 135 mm, Height with packaging: 145 mm, Depth with packaging: 135 mm, Approval number: Z-41.3-606, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Disc valve, fire protection TB 12 DN125Features:Quality Made in GermanyDisc valve with fire protection - for simple ventilation and air extractionStepless regulation of the air flow by means of a rotating valve disc. Simple installation with mounting frame. Installation frame and valve housing connected with bayonet lock. Installation inside or outside fire-resistant shaft walls.Attractive design - compatible with any interior style Fire resistance class K 90 - 18017, suitable for continuous operation.Description:Disc valves for ventilation. Installation frame and valve housing connected with a bayonet catch. Stepless regulation of the air flow by means of a rotating valve disc. Installation with mounting frame. Fire resistance class K 90 - 18017. Installation inside and outside fire-resistant shaft walls. Type series WBV: With maintenance-free fire protection shut-off device and hermetically sealed release device. TB series: Locking of the shut-off device by cadmium-free fusible link. Release of the fusible link at 72 °C or manually. Recommended accessories: Grease trap filter element FFE for use in rooms with greasy exhaust air (kitchens, etc.).Article: TB 12, Air direction: venting, Material: sheet steel, powder-coated, Colour: pure white, similar to RAL 9010, Weight: 0.68 kg, Weight with packaging: 0.7 kg, Fire protection: yes, Suitable for nominal width: 125 mm, Width: 162 mm, Height: 162 mm, Depth: 88 mm, Width with packaging: 160 mm, Height with packaging: 150 mm, Depth with packaging: 160 mm, Approval number: Z-41.3-606, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Disc valve, fire protection TB 15 DN150Features:Quality Made in GermanyDisc valve with fire protection - for simple ventilation and air extractionStepless regulation of the air flow by means of a rotating valve disc. Simple installation with mounting frame. Installation frame and valve housing connected with bayonet lock. Installation inside or outside fire-resistant shaft walls.Attractive design - compatible with any interior style Fire resistance class K 90 - 18017, suitable for continuous operation.Description:Disc valves for ventilation. Installation frame and valve housing connected with a bayonet catch. Stepless regulation of the air flow by means of a rotating valve disc. Installation with mounting frame. Fire resistance class K 90 - 18017. Installation inside and outside fire-resistant shaft walls. Type series WBV: With maintenance-free fire protection shut-off device and hermetically sealed release device. TB series: Locking of the shut-off device by cadmium-free fusible link. Release of the fusible link at 72 °C or manually. Recommended accessories: Grease trap filter element FFE for use in rooms with greasy exhaust air (kitchens, etc.).Article: TB 15, Air direction: venting, Material: sheet steel, powder-coated, Colour: pure white, similar to RAL 9010, Weight: 0.71 kg, Weight with packaging: 0.725 kg, Fire protection: yes, Suitable for nominal width: 150 mm, Width: 183 mm, Height: 183 mm, Depth: 97 mm, Width with packaging: 185 mm, Height with packaging: 185 mm, Depth with packaging: 170 mm, Approval number: Z-41.3-606, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

ApplicationMain areas of application: Sealing and waterproofing of fire-retardant and fire-resistant components, such as ventilation ducts, pipe openings for heating and ventilation installation, smoke flaps, lift shafts, cable shafts, escape staircases, prefabricated ceilings, etc.PropertiesFlame-retardant one-component silicone sealant based on Alcoxy. According to type certificate no. 10224/DO EC from Bureau Veritas in accordance with IMO FTP Code Annex 1, Part 5, suitable for use on ships. Complies with DIN 18542 Part 2 Gr. E and ISO 11600-F&G-25LM, processing temperature + 5° C to + 40°, curing time (23°C, 50 % rel. LF)1 day: 2.0 mm, 7 days: 5.0 mm, temperature resistance - 50° C to + 150 °C