Small room fan ECA 100 ipro Standard, DN100Features:Made in Germany quality, super quiet, two-stage fan connection DN 100, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC,The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on and off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for overrun (4-core cable to fan required)Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Two-stage operation using standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. VDE-GS mark, exception: ECA 100 ipro RC/RCH. VDE mark: ECA 100 RC/RCH. Protection class IP X5 for safety in the bathroom. Protection class II. Suitable for continuous operation. Thermal overload protection. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation, as cover can be easily removed with tools. Wall and ceiling mounting possible. Compatible with ECA predecessor models DN 100, as the fixing holes and flush-mounted cable entry are in the same place. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA 100 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 100 ipro, Version: Standard version, Delivery volume: 78 m3/h / 92 m3/h, Speed: 2100 1/min / 2500 1/min, Speed controllable: yes, Reversible: no, SEC average: -10.69 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 6 W / 8 W, IMax: 0.06 A, Protection rating: IP X5, Mains cable: 3/5 x 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.7 kg, Weight with packaging: 0.85 kg, Flap: none, Nominal width: 100 mm, Width: 159 mm, Height: 159 mm, Depth: 130 mm, Width with packaging: 165 mm, Height with packaging: 165 mm, Depth with packaging: 145 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 27 dB(A) / 32 dB(A) / distance 3 m, Free field conditions

Small room fan ECA 120 VZ internal grille, delay time, DN120Features:Made in Germany quality, super quiet, fan fastening with 2 clamping springs in the pipe, protection class IP 45 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Switch-on delay and run-on time. No rotary switch control and with fixed inner grille. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with delay timer: switch-on delay approx. 50 sec. Run-on time approx. 6 min. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with pressure strength. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 VZ, Version: Delay timer, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 45, Mains cable: 5 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

Small room fan ECA piano H humidity control, DN100Features:Made in Germany quality, super quiet, fan connection DN 100, protection class IP X4 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity sensor - low-maintenance device. Fan monitors room humidity and vents automatically. Uncomplicated one-man installation with standard tools. Permanent power connection required for adjustable run-on time (4-core cable to fan). Not speed controllable Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Humidity control version with adjustable overrun: Barrier-free product, as it switches on / off automatically. With VDE mark. Switch-on humidity adjustable from approx. 50 % relative humidity to approx. 90 % relative humidity. Can be switched on manually with an additional switch, fan then runs for the set run-on time. Run-on time adjustable from approx. 0.5 min to approx. 18 min. Humidity control has priority. Not speed-controllable. Particularly quiet thanks to innovative piano impeller. Cover can be removed for cleaning without tools. Compatible with ECA 100 ipro and ECA predecessor models DN 100, same position of screw holes and cable entry. Protection class IP X4 for safety in the bathroom. Protection class II. Integrated springless non-return flap, durable and stable. Colour traffic white similar to RAL 9016. Suitable for DN 100 pipe. Housing made of impact-resistant plastic. Thermal overload protection. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Extremely simple installation as cover can be removed without tools. Wall and ceiling mounting possible, hole in cover required for ceiling mounting. Electrical connection: Flush-mounted electrical connection. Safety instructions: All ECA piano devices can be used in protection zone 2 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA piano H, Version: Humidity control with adjustable overrun, Delivery volume: 80 m3/h, Speed: 2400 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Rated power: 8 W, IMax: 0.06 A, Protection rating: IP X4, Mains cable: 3/5 x 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.5 kg, Weight with packaging: 0.63 kg, Nominal width: 100 mm, Width: 151 mm, Height: 151 mm, Depth: 104 mm, Width with packaging: 160 mm, Height with packaging: 160 mm, Depth with packaging: 130 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 0.5 min - 18 min - Run-on time when using an optional switch (z.B. Light switch) available, sound pressure level: 26 dB(A) / distance 3 m, free field conditions

ECA 120 K small room fan internal shutter, standard, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against humidity, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Speed controllable. With electrically operated internal lock and protective seals to prevent the ingress of condensation water Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: With electrically operated internal lock. Speed controllable. Exception: ECA 150/4 K. Due to the phase control technology, a physically induced humming noise can occur in the lower speed range. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 K, Version: Standard version, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: yes, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.08 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 36 dB(A) / distance 3 m, Free field conditions

Small room fan ECA 120 KVZ internal shutter, delay time, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against humidity, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Not speed controllable. Electrically operated internal lock. Protective seals to prevent the ingress of condensation. Switch-on delay and run-on time. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with delay timer: With electrically operated internal lock. Switch-on delay approx. 50 seconds. Run-on time approx. 6 minutes. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 KVZ, Version: Delay timer, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 5 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 36 dB(A) / distance 3 m, Free field conditions

Small room fan ECA 120 24 V safety extra-low voltage, DN120Features:Made in Germany quality, super quiet, fan fastening with 2 clamping springs in the pipe, protection class IP 45 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldOn/off switch via electrical connection, optionally surface-mounted or flush-mounted - low-maintenance device. Use only with approved safety transformer. Uncomplicated one-man installation with standard tools. Protective seal against condensation.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with safety extra-low voltage: Rated voltage 24 V, 50 Hz. Use only with approved safety transformer (on site, 230 V/24 V). Combination with delay timer VZ 6, VZ 12 or VZ 24 C (see accessories) possible. Install the delay timers between the switch (230 V) and the input side of the safety transformer. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with pressure strength. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 24 V, Version: Safety extra-low voltage, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 24 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 1.2 A, Protection rating: IP 45, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Nominal diameter: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

ECA 120 KF small room fan internal shutter, light, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipeFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via light control - low-maintenance device. Uncomplicated one-man installation with standard tools. Continuous power connection required for adjustable run-on time (4-core cable to fan). Not speed-controllable. Protective seals against condensationAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with light control: With electrically operated inner lock. Barrier-free product, as it switches on and off automatically. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 seconds. Run-on time approx. 6 minutes. Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 KF, Version: Light control, Delivery volume: 180 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversibility: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 34, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.06 kg, Damper type: electric, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 36 dB(A) / distance 3 m, Free-field conditions

ECA 120 F small room fan with internal grille and light, DN120Features:Made in Germany quality, super quiet, fan fastening with 2 clamping springs in the pipe, protection class IP 45 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product as it switches on/off automatically via minimum brightness in the room - low-maintenance device. Uncomplicated one-man installation with standard tools. Switch-on delay and run-on time. No rotary switch control and with fixed inner grille. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Switching variant: With an additional switch, the fan can be switched off independently of the room lighting (see wiring diagrams on the Internet). Not speed-controllable. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120 F, Version: Light control, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: no, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 45, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.065 kg, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

Small room fan ECA 150 ipro standard version, DN150Features:Quality Made in Germany, Super quiet, two-stage fan connection DN 150, Protection class IP X5 for safety in the kitchen, Protection class IIFor a better indoor climate in the kitchen or cellar, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device - uncomplicated one-man installation with standard tools. Permanent power connection required for run-on time (4-core cable to fan required) Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any kitchen furnishing styleSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: On/off via light switch or separate switch. Operation in either level 1 or level 2. Can be operated in two stages using a standard double changeover switch. Speed controllable. Intelligently programmed small room fan for the highest demands. 2 performance levels. Concealed intake through design cover. For ventilation. Combines high flow volume with high pressure. With VDE-GS mark. Protection class IP X5 for safety in the bathroom. Protection class II. Thermal overload protection. Suitable for continuous operation. Colour traffic white similar to RAL 9016. Housing made of impact-resistant plastic. Motor: Energy-saving, robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Compatible with ECA predecessor models DN 150, as the fixing holes and flush-mounted cable entry are in the same place. Wall and ceiling mounting possible. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: All ECA 150 ipro devices can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 150 ipro, Version: Standard version, Delivery volume: 200 m3/h / 250 m3/h, Speed: 1672 1/min / 2189 1/min, Speed controllable: yes, Reversible: no, SEC average: -11.18 kWh/(m2*a), Voltage type: alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Rated power: 15 W / 19 W, IMax: 0.09 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: ceiling / wall, Installation type: Surface-mounted, Installation position: Any, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.6 kg, Weight with packaging: 1.885 kg, Flap: None, Nominal width: 150 mm, Width: 228 mm, Height: 228 mm, Depth: 123.3 mm, Width with packaging: 235 mm, Height with packaging: 235 mm, Depth with packaging: 200 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 33 dB(A) / 40 dB(A) / distance 3 m, Free field conditions

ECA 120 small room fan internal grille, standard, DN120Features:Made in Germany quality, Super quiet, Fan fastening with 2 clamping springs in the pipe, Protection class IP 45 for safety in the bathroom, Protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldSimple operation by switching on/off with the light switch - low-maintenance device. Uncomplicated one-man installation with standard tools. Speed controllable. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation, thermal overload protection. Energy-saving, robust motor with ball bearingDescription:Standard version: Speed controllable. Due to the phase control technology, a physically induced humming noise can occur in the lower speed range. High delivery volume despite compact size. Combines high delivery volume with high pressure. Thermal overload protection. Housing made of impact-resistant plastic. Protection class II. With VDE-GS mark, exception: ECA 120 24 V. With protective seals to prevent the ingress of condensation water when installed in ceilings. Speed control optional for ECA fans in standard version. Colour traffic white similar to RAL 9016. Motor: Robust motor with ball bearing, maintenance-free. Suitable for continuous operation. Installation instructions: Simple, quick removal of the cover. Quick fastening of the fan in the duct using 2 clamping springs. Electrical connection: Electrical connection optionally surface-mounted or flush-mounted. Safety instructions: ECA 120 devices with protection class IP 45 can be used in protection zone 1 in accordance with DIN VDE 0100-701. For details see Planungshinweise.Artikel: ECA 120, Version: Standard version, Delivery volume: 170 m3/h, Speed: 2600 1/min, Speed controllable: yes, Reversible: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 19 W, IMax: 0.14 A, Protection rating: IP 45, Mains cable: 3 / 1.5 mm2, Installation location: Wall, Installation type: Surface-mounted, Installation position: Any, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.9 kg, Weight with packaging: 1.05 kg, Nominal width: 120 mm, Width: 171 mm, Height: 171 mm, Depth: 114 mm, Width with packaging: 180 mm, Height with packaging: 180 mm, Depth with packaging: 140 mm, Fluid temperature at IMax: 40 °C, Sound pressure level: 42 dB(A) / distance 3 m, Free-field conditions

LUNOS Lunos 41212 Klemmlüfter Ventilatoreinsatz KL für Silvento ec, inkl. Blende und Filter Der Silvento KL ist ein energieeffizientes Abluftgerät für fensterlose Räume wie Bad, WC, Küchen oder Hauswirtschaftsräume. Dank der zweiten Generation bietet es verbesserte Effizienz, einfache Bedienung und komfortable Wartung.Silvento KL AbluftgerätAbluftgerät mit EC-MotorenVolumenströme bis 100 m³/h einstellbarOptimierter Filterrahmen für bessere Ansaugleistung und ca. 10 % geringere LeistungsaufnahmeRGB-LED für Filterwechsel und DiagnosenKombinierbar mit Erweiterungsmodulen: Bewegungsmelder, Funkmodul, WLAN-Modul 5/WMEnergieeffizient, äußerst geringer Stromverbrauch

Abluft-SerieDer Silvento ec ist ein Abluftgerät, welches sehr effizient arbeitet. Wer den Silvento ec als Klemmlüfter benötigt, liest hier weiter.BesonderheitenÜber die Auswahl der verschiedenen Steuerplatinen bestimmt man die Funktionen des Silvento ec. Dadurch wird er zu einem wahren Alleskönner und Volumenströme sind bei Abweichungen vom Soll-Wert einstellbar.Die Steuerung des Silvento ec wird aus sieben verschiedenen Steuerungs-Platinen gewählt:Basisplatine:Für Lüftungsstufen zwischen 15-60 m³/h. Kann zusätzlich mit Zeitnachlauf, Intervallschaltung und Einschaltverzögerung kombiniert werden.Basisplatine 90:Für Lüftungsstufen bis 90 m³/h. Kann zusätzlich mit Zeitnachlauf, Intervallsteuerung und Einschaltverzögerung kombiniert werden.Komfortplatine:Für Lüftungsstufen zwischen 15-60 m³/h mit integriertem Feuchte- und Temperatursensor.Komfortplatine 90:Für Lüftungsstufen bis 90 m³/h mit integriertem Feuchte- und Temperatursensor.Komfort+:Diese Platine bietet neben den bekannten Schalt-, Zeit- und Konfigurationsmöglichkeiten (z.B. Schalterkopplungen oder Feuchte-Sensorik) den VOC-Sensor. Zudem können eine integrierte Feuchte- und Temperatur-Sensorik oder eine CO²-Aquivalenzregelung zugeschaltet sowie optional erhältliche Bewegungssensoren oder Funkmodule integriert werden.Komfort 90+:Wie die Komfort+ Platine, nur mit Lüftungsstufen bis 90 m³/h.Kellerplatine:Mit dieser Platine sorgt der Silvento ec für eine saubere und hygienische Durchlüftung des Kellerbereichs. Die Inbetriebnahme erfolgt in Verbindung mit der Platine 5/EC-KE sowie dem Schalter-Typ 5/W2-FK. Der Lüfter zeichnet dauerhaft die Luftfeuchtigkeit auf und bildet den Mittelwert, welcher durch das Lüften erreicht werden kann. Alle Platinen sind mit drei aufsteckbaren Erweiterungsmodulen kombinierbar:Bewegungsmeldermodul:Mit dem radargestützten Bewegungsmelder werden Schalter überflüssig. Sämtliche Steuertechniken des Grundmoduls werden über den Bewegungsmelder ausgelöst.Funkmodul:Mithilfe diesen Moduls kann der Silvento ec über Funk von externen Steuerungen, Sensoren oder mit Funkschaltern ohne weitere Verkabelung ferngesteuert werden.WLAN-Modul:Mit dem 5/WM hat man jetzt die Freiheit, das Lüftungssystem kabellos aus der Ferne, mit einer Reichweite von bis zu 100 Metern in offenen Bereichen, zu steuern.EinbauDer Einbau im Bereich 1 und 2 in Bade- und Duschräumen entsprechend VDE 100 ist zulässig, siehe auch unter Donwloads im Dokument "Raumpositionierung/Einbau Lüftungsgeräte". Damit der Silvento ec auch an der Außenwand einen guten Eindruck macht, können sich passend zur Fassade Außengitter oder Außenhauben ausgewählt werden.ZulassungDer Silvento ec hat am 21. April 2021 die Allgemeine Bauaufsichtliche Zulassung Z-51.1-215 vom DIBt erhalten.ExtraAls Erweiterung des Funktionsumfangs sowie zur Nutzung von Logging-Funktionen kann der Silvento ec mit der Diagnosesoftware verwendet werden. Durch den äußerst geringen Energieverbrauch ist der Silvento ec so effizient, dass er nicht in die Klassifizierung für das Energielabel fällt und somit gar nicht gelabelt werden darf.Art.-Nr. 40078Art.-Nr. 40079