Befestigungstechnik
Threaded rod, M24Steel, galvanisedaccording to DIN 975, strength 4.8Length: 1 m
Stainless steel washers, DIN 9021, 8.4 mm for M 8Stainless steel A2DIN 9021 (wide washer)
Tinsmith screws (A2 - copper-plated) 4.5 x 45Stainless steel A2 (copper-plated)Screw size 4.5 x 45Screw with sealing disc (neoprene-coated) 19mmDrive T25
Chipboard screws with countersunk head and drive, 6.0 x 80Steel, electrogalvanised, hardenedPartial threadDrive T30
Spanners/hexagon head screws, DIN 571, 8 x 80Steel, galvanisedDIN 571
Spanners 8 x 80Stainless steel A2DIN 571
Reducing pieces, hexagonal, M 8 / M 10Steel, galvanisedInternal thread: M 8External thread: M 10
Pendulum hanger, M8, long versionSteel, galvanised<Height 60 mm<For vertical pendulum suspension of pipes with variable lengths using threaded rods<Height adjustment possible<Pendulum effect 2 x 20°<for M8 thread
Eyebolts, 8 x 20Steel, galvanised
Hexagon head screws/machine screws, DIN 933, M 8 x 80Steel, galvanisedDIN 933with metric threadStrength 8.8
Machine screws / Hexagon head screws stainless steel A2, M 8 x 80Stainless steel A2DIN 933Strength A2-70with metric thread
Stainless steel nuts, DIN 934, M 8Stainless steel A2DIN 934
Slotted hole screws, metric, M 8 x 30Steel, galvanised
Cannulated screws with nuts, M 8 x 20Steel, galvanisedDIN 84 (cylinder head with slot)
Perforated strip, plastic-coated 27/9Steel, galvanised / coatedNoise damping according to DIN 52218Heat-resistant up to 100 °C
Perforated tape / mounting tape 25/9Steel, galvanised
Hexagon socket screws with wood thread, 6 x 40Steel, galvanisedwith hexagon socket head DIN 912for fastening the installation rails with plastic plugs
Threaded eyelets, M 8Steel, galvanisedfor holding M 8 threadUniversally applicable for suspension work
Threaded ends / grub screws M 8 x 80Steel, galvanisedaccording to DIN 976Strength 4.8
Stainless steel threaded ends / grub screws A2 / M 8 x 80Stainless steel A2DIN 976
Threaded bolt, M 8 x 55Steel, galvanisedwith short and long threadsuitable for double bracket
Spacer sleeves, hexagonal 8 x 30Steel, galvanisedfor extending threaded parts
Hanger bolts/concrete screws, 7.5 x 70Steel, galvanisedwith hardened surface to at least 62 HRCZulassung Z-21.1-1503Drill bit diameter 6 mmWidth across flats 10 mmThreaded connection M 8 x 14 mmHigh time saving, concrete screw cuts a thread into the concrete with the toothed headCan be used without dowelsEasy removal possible, can be used in the same drill hole if necessary
Self-drilling screws, DIN 7504 / Form N, 4.2 x 19Steel, electrogalvanised, hardenedwith drill pointDIN 7504Form N (round-head cross recess)
Concrete screws/hexagon head screws, 7.5 x 80Steel, galvanisedwith hardened surface to at least 62 HRCWidth across flats 13 mmHigh time saving, concrete screw cuts a thread into the concrete with the serrated headCan be inserted without dowelsEasy removal possible, can be used in the same drill hole if necessaryFor fastening the installation rails
shoulder screws with metric threaded head, 8 x 80Galvanised steel
Self-tapping screws 4.2x13 mm with hexagon head and pressed-on washer, case-hardened galvanised steel, self-tapping DIN 7504 KThese screws are manufactured in galvanised steel. Self-tapping screws with 6KT head and pressed-on washer are characterised by their head shape (hexagon head with flange) and have a sheet metal thread. When you purchase a packaging unit of DIN 7504 K self-drilling screws, you receive 100 screws. Further important information about the article DIN 7504 Form K - Self-drilling screw with 6KT head with pressed-on washer : Weight per 100 pieces: 0.193 kg d: 4.2 mm; s: 7 mm; l: 13 mm; k: 4.1 mm; lp: 4.5 mm Self-drilling screws made of steel, electrogalvanised, high-quality industrial quality. Self-drilling screws for mounting sheet metal, ventilation ducts, flat ducts, fans, metal rails and car parts. The screws can be easily fastened with a cordless screwdriver without pre-drilling