Product Information „Intelmann® Aluminium Weather Protection Grille Ø 100–315 mm – Type ADWSG“The Intelmann® Aluminium Weather Protection Grille Type ADWSG is the ideal solution for the external termination of ventilation and exhaust systems. It ensures secure air guidance to the outside while reliably protecting against weather influences, insects, as well as the ingress of leaves and foreign objects.Made from high-quality aluminium, the weather protection grille is corrosion-resistant, weatherproof, and suitable for permanent outdoor use. The fixed louvers provide effective rain protection and prevent direct penetration of precipitation into the ventilation system.The integrated insect screen made of fine-mesh stainless steel fabric additionally protects against insects and other small animals without significantly impairing airflow.Thanks to the rear round spigot, the weather protection grille can be easily connected to spiral seam pipes, ventilation pipes, or flexible ventilation hoses. This makes it suitable for numerous applications in residential, commercial, and industrial sectors.Advantages at a Glance✅ Suitable for permanent outdoor use✅ Corrosion-resistant aluminium design✅ Integrated stainless steel insect screen✅ Rigid louvers for effective rain protection✅ Easy installation via round connection✅ Low-maintenance construction✅ Suitable for numerous ventilation and exhaust systemsTechnical Details✔ Manufacturer: Intelmann®✔ Type: ADWSG✔ Product type: Aluminium weather protection grille✔ Diameter: Ø 100 – 315 mm✔ Material: AluminiumAvailable Colours✔ Silver grey (RAL 9006)✔ Black (RAL 9011)✔ White (RAL 9016)Features✔ Rigid weather protection louvers✔ Fine-mesh insect screen made of stainless steel✔ Round spigot for pipe connectionProperties✔ Corrosion-resistant✔ UV-resistant✔ Weatherproof✔ Low maintenance✔ Long service life✔ Easy installationAreas of Application✔ Ventilation technology✔ Air conditioning technology✔ Residential ventilation✔ Commercial ventilation systems✔ Industrial plants✔ Technical building equipmentTypical Applications– External termination of exhaust systems– Cooker hoods– Exhaust dryers– Bathroom ventilation– Basement ventilation– Supply and exhaust air systems– General ventilation systemsInstallation InstructionsInsert the weather protection grille with the round spigot into the ventilation pipe.If necessary, secure with suitable screws.Ensure airtight connection.Check the function of the air guidance.Scope of Delivery✔ 1 × Intelmann® Aluminium Weather Protection Grille Type ADWSGWith the Intelmann® Aluminium Weather Protection Grille Type ADWSG, you receive a durable and visually appealing solution for the external termination of ventilation systems. The combination of corrosion-resistant aluminium, integrated insect protection, and effective rain protection ensures reliable operation of your ventilation system in all weather conditions.
Weather protection grille Ø 100 mm to Ø 150 mm type WSHE Stainless steel V2A Design weather protection grille for outside, weatherproof With self-closing flap, damped flap stop, no rattling due to metal on metal With rubber sealing tape for perfect connection to external façade, screws for installation included in scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.
Weather protection grille made of pressed aluminium Suitable for spiral ducts Installation without screws and tools Weather protection grille for outside, weatherproof For mounting on external wall, for exhaust air from extractor bonnets or exhaust air dryers Fixed louvres prevent the ingress of rainwater Spigot length at the rear: 50 mm
SG 100 - Brief InformationExternal grille made of plastic for supply and exhaust air, DN 100, whiteSG 100 - Product DescriptionExternal grille for supply and exhaust air.External wall connection when using the wall sleeve WH.With concealed screw holes.Sealing tape included in the scope of delivery.Accessories: Fly screen FG can be used.SG 100 / SG 100 B: Retrofit air filter ZRF available.SG 120: Retrofit air filter SF 120 available.Installation / Operation / Maintenance Installation instructions: pdf | online ArticleSG 100Air directionSupply and exhaust airInstallationoutsideInstallation locationWallType of installationSurface-mountedMaterialPlastic, weatherproof, UV-resistantColourTraffic white, similar to RAL 9016Weight0.1 kgWeight with packaging0.13 kgSuitable for nominal size100 mmWidth150 mmHeight150 mmDepth51.5 mmWidth with packaging151 mmHeight with packaging151 mmDepth with packaging55 mmAmbient temperature60 °CPackaging unit1 pieceRangeAGTIN (EAN)4012799990048Article number0059.1054
Weather protection grille Ø 100 mm to Ø 200 mm type WSQLE Stainless steel V2A Design weather protection grille for outside, weatherproof With movable slats With rubber sealing tape for perfect connection to the external façade, screws for installation included in the scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.
Insertion grille for spiral duct with bird protection mesh 12 x 12 mm
Weather protection grille for flat duct Rear, angular connection for direct connection to flat duct With bird and fly screen Material: galvanised steel
Weather protection grille Ø 100 mm to Ø 200 mm Type WSKE Stainless steel V2A Designer weather protection grille for outdoors, weatherproof with insect screen made of fine‑mesh stainless steel With fixed slats The clamping tab prevents water stains on the wall With rubber sealing tape for a perfect connection to the external façade, screws for mounting included Rear circular outlet for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the hood. This may sometimes require a little patience. Engage the clamping tab as well. Then insert the weather protection grille with the spigot into the ventilation pipe and secure it directly to the wall with the supplied screws. For better fastening in the ventilation pipe, there are clamping tabs on the spigot of the hood.
Weather protection grille Ø 100 mm to Ø 200 mm type WSKED Stainless steel V2A Design weather protection grille for outside, weatherproof With bird protection grille mesh size 12.5 x 12.5 mm With rigid slats The clamping tab prevents watermarks on the wall With rubber sealing tape for perfect connection to the external façade, screws for installation included in the scope of delivery Round connection on the back for connecting a ventilation pipe or hose Installation:Attach the rubber seal to the outer edge of the bonnet. This sometimes requires a little patience. Also attach the clamping tab. Then insert the weather protection grille with the connection piece into the ventilation duct and fix it directly to the wall using the screws provided. For better fastening in the ventilation duct, there are clamping lugs on the spigot of the bonnet.
SG 150/1 - Brief InformationExternal grille made of plastic for supply and exhaust air, DN 150, whiteSG 150/1 - Product DescriptionExternal grille for supply and exhaust air.External wall connection when using the wall sleeve WH.With concealed screw holes.Sealing tape included in the scope of delivery.Accessories: Fly screen FG can be used.SG 100 / SG 100 B: Air filter retrofittable ZRF.SG 120: Air filter retrofittable SF 120. ArticleSG 150/1Airflow directionSupply and exhaust airInstallationOutsideInstallation locationWallType of installationSurface-mountedMaterialPlastic, weatherproof, UV-resistantColourTraffic white, similar to RAL 9016Weight0.4 kgWeight with packaging0.41 kgSuitable for nominal size150 mmWidth200 mmHeight200 mmDepth56 mmWidth with packaging202 mmHeight with packaging202 mmDepth with packaging58 mmAmbient temperature60 °CPackaging unit1 pieceRangeAGTIN (EAN)4012799599975Article number0059.0997
Product information „Lunos 039852 External grille 1/WE180 with claw fastener, insect screen and facade protection ring, Ø 180 mm, white“The Lunos external grille 1/WE180 (Art. no. 039852) is a high-quality ventilation grille for external wall mounting. It serves as a functional and visually appealing termination of ventilation ducts and reliably protects the ventilation system from the ingress of insects and foreign objects.Thanks to the integrated claw fastener, the external grille can be mounted quickly and securely. The additional facade protection ring protects the transition between the ventilation duct and the facade and ensures a neat wall finish.The external grille is made of weather-resistant plastic in white (similar to RAL 9016 Traffic White) and is ideally suited for use with Lunos ventilation systems.Advantages at a glance✅ Original Lunos accessory✅ Integrated claw fastener for easy installation✅ With insect screen✅ Facade protection ring for a neat wall finish✅ Weather-resistant plastic✅ Suitable for external wall mounting✅ Colour white (similar to RAL 9016)Technical details✔ Manufacturer: Lunos✔ Article number: 039852✔ Type: 1/WE180✔ Material: Plastic✔ Colour: White (similar to RAL 9016 Traffic White)✔ Mounting type: Surface-mounted✔ Version: With claw fastener, insect screen and facade protection ringDimensions✔ Outer diameter: 180 mm✔ Inner diameter: 154 mm✔ Required installation depth in duct: 10 mmFeatures✔ Protection against insects and foreign objects✔ Weather-resistant design✔ Simple and quick installation✔ Robust plastic construction✔ Low maintenanceAreas of application– Controlled residential ventilation– External wall connections of ventilation systems– New build and renovation– Residential and commercial buildings– Lunos ventilation systemsThe Lunos external grille 1/WE180 provides a reliable facade termination for ventilation systems and combines easy installation, integrated insect protection and durable materials in a compact design.
Product Information „Lunos 041143 External Grille 1/AZ180 with Claw Fastening, Insect Screen and Façade Protection Ring, Ø 180 mm, Anthracite“The Lunos External Grille 1/AZ180 (Art. No. 041143) is a robust and weather-resistant ventilation grille designed for use on external façades. It serves as a functional closure for ventilation openings and reliably protects the ventilation system from the ingress of insects and foreign objects.Thanks to the integrated claw fastening, the external grille can be mounted quickly and securely. The additional façade protection ring protects the wall connection from moisture ingress and ensures a neat façade finish.The external grille is made of UV-stable plastic in anthracite (similar to RAL 7016) and is ideal for modern façade designs.Advantages at a Glance✅ Original Lunos accessory✅ Integrated claw fastening✅ With insect protection screen✅ Façade protection ring for additional protection✅ UV-stable and weather-resistant✅ Suitable for external wall and façade installation✅ Anthracite colour (similar to RAL 7016)Technical Details✔ Manufacturer: Lunos✔ Article number: 041143✔ Type: 1/AZ180✔ Material: Plastic✔ Colour: Anthracite (similar to RAL 7016)✔ Installation type: Surface-mounted✔ Version: With claw fastening, insect screen and façade protection ringDimensions✔ Outer diameter: Ø 180 mm✔ Inner diameter: Ø 154 mm✔ Installation depth in duct: 10 mmFeatures✔ Protection against insects and foreign objects✔ UV-stable design✔ Weather-resistant construction✔ Easy and quick installation✔ Low maintenanceAreas of Application– Controlled residential ventilation– External wall and façade connections– New build and renovation– Residential and commercial buildings– Ventilation systems with Ø 180 mm connection areaThe Lunos External Grille 1/AZ180 offers a durable and visually appealing façade finish for ventilation systems. Thanks to the integrated insect screen, façade protection ring and UV-stable design, it is ideal for permanent use outdoors.
MGR 160 alu - Brief InformationRound weather protection grille for pipes DN 160, aluminiumMGR 160 alu - Product DescriptionWeather protection grille for supply and exhaust air in particularly high-quality design.For covering round ventilation openings.With angled slats and bird protection grille.With DN 160 spigot for direct connection to ventilation pipes. ArticleMGR 160 aluDesignroundAir DirectionSupply and exhaust airMaterialAluminium castingWeight0.39 kgWeight with Packaging0.39 kgSuitable for Nominal Diameter160 mmFree Cross-Section120 cm²Width260 mmHeight240 mmDepth81 mmWidth with Packaging263 mmHeight with Packaging243 mmDepth with Packaging84 mmPackaging Unit1 pieceRangeKGTIN (EAN)4012799780366Article Number0078.0036
External grille MGE 80/125 white, square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring mounting.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring mounting. For pipe diameters from 80 mm to 125 mm. Item: MGE 80/125 white, version: square, air direction: exhaust, material: metal, weight: 0.1 kg, weight with packaging: 0.145 kg, width: 150 mm, height: 150 mm, depth: 25 mm, width with packaging: 153 mm, height with packaging: 153 mm, depth with packaging: 26 mm, suitable for box fans: no, suitable for roof fans: no, suitable for duct fans: no, suitable for heat recovery systems: no, suitable for wall-mounted fans: no, suitable for wall-mounted inlet fans: no, suitable for residential fans: no, suitable for centrifugal fans: no, suitable for circulation fans: no
External grille SG 100 B for supply and exhaust air, DN100, brownFeatures:Quality Made in GermanyExternal grille - for easy installationWith concealed screw holes. Sealing tape included. External wall connection when using the wall sleeve WH 100 & 120 & 150. Weather- and UV-resistant plastic housingAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior styleSuitable for continuous operation.Description:External grille for supply and exhaust air. External wall connection when using the wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Accessory fly screen FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanized protective grille. Sealing tape included. Replacement air filter for SG 120: SF 120.Article: SG 100 B, Airflow direction: supply and exhaust air, Installation: external, Installation location: wall, Installation type: surface-mounted, Material: plastic, weather- and UV-resistant, Colour: chestnut brown, similar to RAL 8015, Weight: 0.1 kg, Weight with packaging: 0.127 kg, Suitable for nominal diameter: 100 mm, Width: 150 mm, Height: 150 mm, Depth: 51.5 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 55 mm, Ambient temperature: 60 °C, Suitable for box fans: no, Suitable for roof fans: no, Suitable for duct fans: yes, Suitable for heat recovery systems: no, Suitable for wall construction fans: no, Suitable for wall-mounted fans: no, Suitable for residential fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no, With wire mesh: no, With insect screen: no, With overpressure flap, intake: no, With overpressure flap, exhaust: no, With counter-rotating flap valve: no, With co-rotating flap valve: no, With installation frame: no, Lockable: no, Motor-controlled: no
External grille SG 120 for ventilation, DN120, whiteFeatures:Quality Made in GermanyExternal grille - for easy installationWith concealed screw holes. Sealing tape included in the scope of delivery. External wall connection when using wall sleeve WH 100 & 120 & 150. Weather and UV-resistant plastic housingAttractive design with elegant front panel made of impact-resistant plastic - compatible with any interior style Suitable for continuous operation.Description:External grille for ventilation. External wall connection when using wall sleeve WH100 & 120 & 150. SG 100 & 120 & 150/1: With concealed screw holes. Fly screen accessories FG 100 & 120 & 150 can be used. SG 100 B: brown. SG 15: With galvanised protective grille. Sealing tape included in the scope of delivery. Replacement air filter for SG 120: SF 120.Artikel: SG 120, Air direction: Ventilation, Installation: Outside, Installation location: Wall, Installation type: Surface-mounted, Material: Plastic, Weather-resistant, UV-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.165 kg, Weight with packaging: 0.175 kg, Suitable for nominal diameter: 125 mm, Width: 172 mm, Height: 172 mm, Depth: 53 mm, Width with packaging: 175 mm, Height with packaging: 175 mm, Depth with packaging: 54 mm, Ambient temperature: 60 °C, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: yes, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no, With wire mesh: no, With insect screen: no, With pressure relief damper, intake: no, With pressure relief damper, exhaust: no, With counter-rotating damper valve: no, With co-rotating damper valve: no, With installation frame: no, Lockable: no, Motorised: no
Product information „Lunos 039917 External grille 1/BE180 with claw fixing, insect protection and facade protection ring, Ø 180 mm, sanded“The Lunos external grille 1/BE180 (Art. no. 039917) is a high-quality external wall termination for ventilation systems with a Ø 180 mm connection area. It reliably protects the ventilation opening from insects and foreign objects while also providing a neat facade finish.The sanded surface allows for slurrying or plastering over, so the external grille can be visually harmoniously integrated into the facade. The integrated claw fixing and facade protection ring ensure easy and secure installation.Advantages at a glance✅ Original Lunos accessory✅ Sanded surface for slurrying or plastering over✅ Integrated insect protection✅ With claw fixing and facade protection ring✅ Weather-resistant plastic✅ Easy surface-mounted installation✅ Discreet integration into the facadeTechnical details✔ Manufacturer: Lunos✔ Article number: 039917✔ Type: 1/BE180✔ Application: External grille / external closure✔ Material: Plastic✔ Colour: Sanded, for slurrying or plastering over✔ Mounting type: Surface-mountedEquipment✔ Claw fixing✔ Insect protection grille✔ Facade protection ringDimensions✔ Outer diameter: 180 mm✔ Inner diameter: 154 mm✔ Required installation depth in duct: 10 mmFeatures✔ Protection against insects and foreign objects✔ Plasterable surface✔ Weather-resistant design✔ Easy installation✔ Maintenance-friendly constructionAreas of application– Controlled residential ventilation– External wall connections of ventilation systems– New build and renovation– Residential and commercial buildings– Facades with plaster surfacesThe Lunos external grille 1/BE180 offers a functional and visually discreet facade termination for ventilation systems. The sanded surface allows for an almost invisible integration into plastered facades, while the integrated insect protection provides additional security.
Stainless Steel Air Hood LH-V2A 12 for Supply and Exhaust Ventilation, DN125Features:Quality Made in GermanyAir hood for outdoor or exhaust air – for simple supply and exhaust ventilationWith bird protection grille. For connection to outdoor air ducts, exhaust air ducts, extractor hoods, tumble dryers, etc. Easy installation via connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design – compatible with any interior styleSuitable for continuous operation.Description:Air hood for supply and exhaust ventilation. For connection to outdoor air ducts, exhaust air ducts, extractor hoods, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when used for exhaust air, building measures must be taken to ensure that any condensate does not run down the building facade.Article: LH-V2A 12, Airflow direction: Supply and exhaust ventilation, Installation: external, Installation location: external wall, Material: stainless steel, Colour: brushed stainless steel, Weight: 0.317 kg, Weight with packaging: 0.32 kg, Suitable for nominal diameter: 125 mm, Free cross-section: 98 cm², Width: 190 mm, Height: 190 mm, Depth: 45 mm, Width with packaging: 191 mm, Height with packaging: 191 mm, Depth with packaging: 150 mm, Suitable for box fans: no, Suitable for roof fans: no, Suitable for duct fans: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted fans: no, Suitable for wall-mounted inlet fans: no, Suitable for residential fans: yes, Suitable for centrifugal fans: no, Suitable for circulation fans: no
Product information „Lunos 041140 Facade Protection Ring 1/FSR-AZ for Round Ducts and External Grilles, Ø 180 mm, Anthracite“The Lunos Facade Protection Ring 1/FSR-AZ (Art. No. 041140) is used for a neat and visually appealing finish of ventilation penetrations on the exterior facade. It protects the transition area between the round duct, external grille, and facade, ensuring a clean framing of the wall opening.The facade protection ring is suitable for 160 mm round ducts as well as external grilles with a 154 mm internal diameter. The version in Anthracite (similar to RAL 7016) blends harmoniously into modern facade designs.Advantages at a glance✅ Original Lunos accessory✅ Protects the facade connection area✅ Neat and visually appealing wall finish✅ Suitable for 160 mm round ducts✅ Suitable for external grilles with 154 mm internal diameter✅ Weather-resistant design✅ Anthracite colour (similar to RAL 7016)Technical details✔ Manufacturer: Lunos✔ Article number: 041140✔ Type: 1/FSR-AZ✔ Application: Facade protection ring for round ducts and external grilles✔ Colour: Anthracite (similar to RAL 7016)Compatibility✔ Round ducts Ø 160 mm✔ External grilles with Ø 154 mm internal diameterDimensions✔ Internal diameter: 154 mm✔ External diameter: 180 mmFeatures✔ Protection of the facade connection✔ Clean framing of wall penetrations✔ Easy installation✔ Weather-resistant✔ Original Lunos system accessoryAreas of application– Controlled residential ventilation– External wall penetrations– New build and renovation– Residential and commercial buildings– Ventilation systems with 160 mm round ductsThe Lunos Facade Protection Ring 1/FSR-AZ ensures a neat finish of ventilation penetrations and reliably protects the transition area between ventilation components and facade from dirt and visual impairments.
External grille MGR 80/125 V2A round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring mounting.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring mounting. For pipe diameters from 80 mm to 125 mm. Item: MGR 80/125 V2A, version: round, air direction: exhaust, material: stainless steel, weight: 0.1 kg, weight with packaging: 0.112 kg, outer diameter: 130 mm, width: 130 mm, height: 130 mm, depth: 130 mm, width with packaging: 130 mm, height with packaging: 27 mm, depth with packaging: 130 mm, suitable for box fans: no, suitable for roof fans: no, suitable for pipe fans: no, suitable for heat recovery systems: no, suitable for wall construction fans: no, suitable for wall-mounted fans: no, suitable for residential fans: no, suitable for centrifugal fans: no, suitable for circulation fans: no
External grille MGE 80/125 V2A square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring mounting.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring mounting. For pipe diameters from 80 mm to 125 mm. Item: MGE 80/125 V2A, version: square, air direction: exhaust, material: stainless steel, weight: 0.1 kg, weight with packaging: 0.138 kg, width: 150 mm, height: 150 mm, depth: 25 mm, width with packaging: 151 mm, height with packaging: 151 mm, depth with packaging: 26 mm, suitable for box fans: no, suitable for roof fans: no, suitable for duct fans: no, suitable for heat recovery systems: no, suitable for wall-mounted fans: no, suitable for wall-mounted inlet fans: no, suitable for residential fans: no, suitable for centrifugal fans: no, suitable for circulation fans: no
Stainless Steel Air Hood LH-V2A 10 for Supply and Exhaust Air, DN100Features:Quality Made in GermanyAir hood for outdoor or exhaust air – for simple supply and exhaust ventilationWith bird protection grille. For connection to outdoor air ducts, exhaust air ducts, extractor hoods, tumble dryers, etc. Easy installation via connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design – compatible with any interior styleSuitable for continuous operation.Description:Air hood for supply and exhaust ventilation. For connection to outdoor air ducts, exhaust air ducts, extractor hoods, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when used for exhaust air, on-site measures must be taken to ensure that any condensate does not run down the building facade.Article: LH-V2A 10, Airflow direction: Supply and exhaust, Installation: external, Installation location: exterior wall, Material: stainless steel, Colour: stainless steel, brushed, Weight: 0.211 kg, Weight with packaging: 0.213 kg, Suitable for nominal diameter: 100 mm, Free cross-section: 63 cm², Width: 150 mm, Height: 150 mm, Depth: 45 mm, Width with packaging: 151 mm, Height with packaging: 151 mm, Depth with packaging: 124 mm, Suitable for box fans: no, Suitable for roof fans: no, Suitable for duct fans: no, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for wall-mounted inlet fans: no, Suitable for residential fans: no, Suitable for centrifugal fans: no, Suitable for circulation fans: no
External grille MGE 80/125 aluminium square, DN80 to 125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring mounting.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring mounting. For pipe diameters from 80 mm to 125 mm. Item: MGE 80/125 alu, version: square, air direction: exhaust, material: aluminium, weight: 0.079 kg, weight with packaging: 0.1 kg, width: 150 mm, height: 150 mm, depth: 30 mm, width with packaging: 153 mm, height with packaging: 153 mm, depth with packaging: 31 mm, suitable for box fans: no, suitable for roof fans: no, suitable for duct fans: no, suitable for heat recovery systems: no, suitable for wall-mounted fans: no, suitable for built-in wall fans: no, suitable for residential fans: no, suitable for centrifugal fans: no, suitable for circulation fans: no
Product Information „Intelmann® Weather Protection Grille made of Stainless Steel, Square, with Automatic Non-Return Flap“The Intelmann® Weather Protection Grille made of Stainless Steel is available in nominal sizes DN 125 and DN 150 and reliably protects ventilation openings from weather influences. Thanks to the integrated automatic non-return flap, the grille only opens when there is an airflow and then closes automatically again.The spring-mounted non-return flap ensures a secure closure of the ventilation opening as soon as there is no longer any airflow. This significantly reduces unwanted draughts, heat loss, and the ingress of cold outside air.Due to the closed flap construction, an additional insect screen is not required in many applications. The high-quality stainless steel design is suitable for residential buildings as well as commercial and industrial ventilation systems.Advantages at a Glance✅ Automatic non-return flap with spring return✅ Reduces ingress of cold outside air✅ Minimises heat loss and draughts✅ No separate insect screen required✅ High-quality stainless steel design✅ Corrosion-resistant and durable✅ Suitable for supply and exhaust air systemsTechnical Details✔ Manufacturer: Intelmann®✔ Product type: Weather protection grille with non-return flap✔ Design: Square✔ Material: Stainless steel✔ Non-return flap: Spring-mounted, self-closing✔ Installation: Wall mountingDimensions✔ Available nominal sizes: DN 125 and DN 150✔ Design: Square = 185 x 185 mm // Hole spacing 167 x 167 mmFeatures✔ Automatic opening with airflow✔ Self-closing after operation ends✔ Protection against cold draughts✔ Weather-resistant✔ Corrosion-resistant✔ Low-maintenance constructionFunctionThe integrated non-return flap is opened by the airflow. As soon as the airflow stops, the spring-mounted flap closes automatically and seals the opening largely tight. This reduces the ingress of cold outside air, insects, and dirt.Areas of Application✔ Controlled residential ventilation (CRV)✔ Bathroom and WC ventilation✔ Kitchen exhaust air✔ Basement ventilation✔ Commercial ventilation systems✔ Industrial exhaust systemsFields of Use– Residential buildings– Office buildings– Commercial properties– Industrial facilities– Ventilation and air conditioning systemsThe Intelmann® Weather Protection Grille with Automatic Non-Return Flap offers a robust and durable solution for ventilation openings. The spring-mounted flap reliably protects against cold draughts and helps to reduce energy losses and increase comfort indoors.
Intelmann® Weather Protection Grille for Flat Duct 100x50 / 140x50 / 180x50 / 220x50 / 300x50 mm – Square Connection, Stainless Steel V2AThe Intelmann® weather protection grille for flat duct is the ideal solution for the external termination of rectangular ventilation systems. It ensures secure exhaust air guidance while reliably protecting against weather conditions, insects, and foreign objects.Made from stainless steel V2A, the weather protection grille offers a robust and durable design for long-term outdoor use. The rear square connection allows a direct and precise fit with the Intelmann flat duct system.The integrated bird and insect screen reliably prevents animals and insects from entering the ventilation system. At the same time, the louvers provide effective protection against rain and dirt.Advantages at a glance:✅ Precisely fitting for flat duct – direct connection without adapter✅ Robust design – stainless steel V2A for long service life✅ Weather-resistant – protection against rain and environmental influences✅ Integrated insect protection – bird and insect screen✅ Effective air guidance – suitable for exhaust systems✅ Versatile use – for kitchen, bathroom, and ventilation systemsTechnical details:✔ Product name: Intelmann® Weather Protection Grille for Flat Duct✔ Sizes: 100x50 / 140x50 / 180x50 / 220x50 / 300x50 mm✔ Material: Stainless steel V2A✔ Connection: Square connection (rear)✔ Features: Integrated bird and insect screenInstallation instructions:The weather protection grille is inserted or connected directly into the flat duct. Depending on the installation situation, additional fixing with screws or sealing material may be necessary.Application & areas of use:The weather protection grille is used as an external termination for flat duct ventilation systems, e.g. for extractor hoods, bathroom ventilation, or general exhaust systems. It ensures secure air discharge while protecting the duct system from external influences.With the Intelmann® weather protection grille for flat duct, you receive a robust, easy-to-install, and reliable solution for professional use in ventilation and exhaust systems.
Product Information „Lunos 040093 Façade Protection Ring 1/FSR-WE for Round Ducts and External Grilles, Ø 180 mm, White“The Lunos Façade Protection Ring 1/FSR-WE (Art. No. 040093) is used for a neat and visually appealing finish of ventilation penetrations on the external façade. It protects the transition area between the round duct, external grille, and façade, ensuring an even framing of the wall opening.The façade protection ring is designed for 160 mm round ducts as well as external grilles with a 154 mm internal diameter. The version in white (similar to RAL 9016 Traffic White) blends harmoniously into light façade designs and provides a clean appearance.Advantages at a Glance✅ Original Lunos accessory✅ Protection of the façade connection area✅ Neat and visually appealing wall finish✅ Suitable for 160 mm round ducts✅ Suitable for external grilles with 154 mm internal diameter✅ Weather-resistant design✅ White colour (similar to RAL 9016)Technical Details✔ Manufacturer: Lunos✔ Article number: 040093✔ Type: 1/FSR-WE✔ Application: Façade protection ring for round ducts and external grilles✔ Colour: White (similar to RAL 9016 Traffic White)Compatibility✔ Round ducts Ø 160 mm✔ External grilles with Ø 154 mm internal diameterDimensions✔ Internal diameter: 154 mm✔ External diameter: 180 mmFeatures✔ Protection of the façade connection✔ Neat framing of wall penetrations✔ Easy installation✔ Weather-resistant✔ Original Lunos system accessoryAreas of Application– Controlled residential ventilation– External wall penetrations– New build and renovation– Residential and commercial buildings– Ventilation systems with 160 mm round ductsThe Lunos Façade Protection Ring 1/FSR-WE ensures a neat finish of ventilation penetrations and reliably protects the transition area between ventilation components and the façade. The white version allows for discreet integration into light façades.
Quality Made in GermanyAir bonnet for outside or exhaust air - for easy ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.
External grille MGR 80/125 aluminium round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring holder. Attractive design - compatible with any interior style Suitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring holder. For duct diameters from 80 mm to 125 mm.Artikel: MGR 80/125 alu, Version: round, Air direction: ventilation, Material: aluminium, Weight: 0.07 kg, Weight with packaging: 0.1 kg, Outer diameter: 130 mm, Width: 130 mm, Height: 130 mm, Depth: 133 mm, Width with packaging: 133 mm, Height with packaging: 30 mm, Depth with packaging: 133 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
External grille MGR 80/125 white, round, for pipe DN80 to DN125Features:Quality Made in GermanyExternal grille - for easy installationWith insect screen and spring mounting.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:MGR: External grille for covering round ventilation openings. MGE: External grille for covering rectangular ventilation openings. With insect screen and spring mounting. For pipe diameters from 80 mm to 125 mm. Item: MGR 80/125 white, version: round, air direction: exhaust, material: metal, weight: 0.1 kg, weight with packaging: 0.102 kg, outer diameter: 130 mm, width: 130 mm, height: 130 mm, depth: 133 mm, width with packaging: 133 mm, height with packaging: 25 mm, depth with packaging: 133 mm, suitable for box fans: no, suitable for roof fans: no, suitable for pipe fans: no, suitable for heat recovery systems: no, suitable for wall construction fans: no, suitable for wall-mounted fans: no, suitable for residential fans: no, suitable for centrifugal fans: no, suitable for circulation fans: no
Stainless steel air bonnet LH-V2A 15 for aeration and ventilation, DN150Features:Quality Made in GermanyAir bonnet for outside or exhaust air - for simple ventilation and extractionWith bird protection grille. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. Simple installation thanks to connection spigot and clamping spring. Without lip seal on the spigot and without condensate drainage edge.Attractive design - compatible with any interior style Suitable for continuous operation.Description:Air bonnet for ventilation and extraction. For connection to outside air ducts, exhaust air ducts, extractor bonnets, tumble dryers, etc. With connection spigot and clamping spring for easy installation. With bird protection grille. Without lip seal on the spigot and without condensate drainage edge. Especially when the air bonnet is used for exhaust air, on-site measures must be taken to ensure that any condensation water that may occur does not get onto the air bonnet. Condensation water must be prevented from running off the building facade, especially when the air hood is used for exhaust airuft.Artikel: LH-V2A 15, Air direction: Ventilation, Installation: Outside, Installation location: Outside wall, Material: Stainless steel, Colour: Stainless steel, brushed, Weight: 0.397 kg, Weight with packaging: 0.403 kg, Suitable for nominal width: 150 mm, Free cross-section: 146 cm2, Width: 212 mm, Height: 212 mm, Depth: 52 mm, Width with packaging: 215 mm, Height with packaging: 215 mm, Depth with packaging: 170 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for tube ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: no, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no