Basement dehumidification
Wall sleeve WH 150 plastic, extendable, DN150Features:Quality Made in GermanyWall sleeve - for easy installationFor wall and ceiling mounting. Variable length.Attractive design - compatible with any interior styleSuitable for continuous operation.Description:Wall sleeve for wall and ceiling mounting. Length variabel.Artikel: WH 150, Installation location: Wall / ceiling, Material: Plastic, Weight: 1.35 kg, Weight with packaging: 1.4 kg, Suitable for nominal diameter: 150 mm, Width: 168 mm, Height: 168 mm, Depth: 500 mm, Width with packaging: 168 mm, Height with packaging: 168 mm, Depth with packaging: 500 mm, Required core drilling: min. 169 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: no, Suitable for wall-mounted ventilators: no, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no
FE 100/1 SG window installation kit with fixed outer flapFeatures:Made in Germany quality, super quietWindow installation kit - for easy installation in windows and thin wallsSimple installation thanks to interlocking adapters and threaded connectors. Electrical connection to the terminal strip in the housing. Scope of delivery: External flap AP or external grille SG, 3 x spacer frames, 2 x sealing rings, threaded connectors, 3 x screws for fan fastening, strain relief bracket with 2 x screws, cable sheath, installation instructionsAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation.Description:For installation in windows and thin walls. Colour traffic white similar to RAL 9016, housing made of impact-resistant plastic. Scope of delivery: External flap AP or external grille SG, 3 x spacer frames, 2 x sealing rings, threaded connectors, 3 x screws for fan fastening, strain relief bracket with 2 x screws, cable grommet, installation instructions. Installation instructions: Simple installation in the window cut-out thanks to interlocking adapter and threaded spigot. Pane thickness at least 3 mm, pane spacing up to 75 mm. Pane cut-out 115 to 120 mm. Not suitable for installation in hinged double windows. Electrical connection: To the terminal strip in the housing of the ECA 100 ipro...Article: FE 100/1 SG, Installation location: Window / thin wall, Installation position: Horizontal, Material: Plastic, impact-resistant, Colour: Traffic white, similar to RAL 9016, Weight: 0.4068 kg, Weight with packaging: 0.493 kg, Width: 150 mm, Height: 150 mm, Depth: 103 mm, Width with packaging: 158 mm, Height with packaging: 158 mm, Depth with packaging: 123 mm
AKE/1 - Brief informationControl unit AKE/1 incl. 2 pcs. AKE FFT humidity and temperature sensor (4m cable, can be extended on site to max. 30m) for fully automatic cellar dehumidification in conjunction with various fansAKE/1 - Product descriptionProduct featuresFully automatic, intelligent cellar dehumidification control for the highest demands.Permanent equalisation of the absolute humidity indoors and outdoors: Connected fans ventilate independently if the absolute humidity in the room is higher than outside.No maintenance or manual control required: install once and the system works automatically.Operation of fans up to a total (supply and extract air fan) of 600 W and 3 A.For the use of fans > 600 W and 3 A as well as three-phase fans, a circuit breaker must be installed between the control unit and the fan.Barrier-free product, as it switches on/off automatically without additional switches.Control unit monitors the room humidity via integrated humidity/temperature sensors.Frost protection function: system switches off at indoor temperatures below 5 °C.Additional manual operation for 30 minutes can be switched on and off again using a button on the control unit.No additional installation from the switch to the device necessary.Additional manual operation with external button or switch possible.Automatic button / switch detection.Status and function display via LEDs.Compact dimensions: Control unit 160 x 110 x 90 mm, outdoor sensor Ø50 mm, height 13 mm.Scope of delivery: Control unit, 2 sensors with 4 m cable length each.Sensor cable can be extended on site with LIYY 4x0.25 mm² cable to max. 30 (separate installation required).Housing made of impact-resistant plastic.IP protection: Control unit IP40 / outdoor sensor IP54.Frost protection: To prevent the room from cooling down, the AKE has a frost protection function. This automatically switches off the connected fan(s) at indoor temperatures of less than 5 °C.Garage dehumidification: optional switch-off of the frost protection function for unheated rooms.Suitable for continuous operation.Installation instructionsSimple installation: Wall mounting.Electrical connection: Surface-mounted.
Small room fan AKE 150 Basement dehumidification, 250 m3/h, DN 150 AKE 150/1 - Brief InformationAutomatic basement dehumidification, DN 150, air volume 250 m³/hAKE 150/1 - Product DescriptionDesignApplication area up to approx. 70 m² per fan.Versatile system expandability: connection of a supply air fan (e.g. ECA 15/4 E) possible to increase air exchange.FeaturesFully automatic, intelligent basement dehumidification for the highest demands.Permanent comparison of absolute humidity indoors and outdoors: fan ventilates independently when the absolute humidity inside is higher than outside.No maintenance or manual control required: install once and the system operates automatically.Additional fans without their own dew point control can be connected directly to the AKE up to max. 1.2 A and benefit from the intelligence.Fans > 1.2 A can be connected via an intermediate relay or contactor, allowing larger or multiple rooms to be dehumidified via the AKE.Concealed intake through design cover.Barrier-free product, as automatic switching on/off without additional switches.Fan monitors room humidity.Frost protection function: system switches off automatically at indoor temperatures below 5 °C.Garage dehumidification: optional deactivation of frost protection for unheated rooms.Additional manual operation for 30 minutes can be switched on and off via a push button.No additional installation of a switch to the device necessary.Additional manual operation with external push button or switch possible.Automatic push button / switch detection.Status and function display via LEDs.Scope of delivery:FanExternal closure flapSensors1.5 m connection cableTraffic white colour, similar to RAL 9016.Housing made of impact-resistant plastic.Thermal overload protection.Protection class II.Frost ProtectionTo prevent the room from cooling down, the AKE has a frost protection function. The fan switches off automatically at indoor temperatures below 5 °C.Garage DehumidificationThe frost protection function of the AKE can be bypassed via DIP switch to allow year-round dehumidification of unheated rooms.MotorEnergy-saving, robust motor with ball bearings, maintenance-free.Suitable for continuous operation.Installation InstructionsSimple installation:AKE 100: Core hole drilling 105 mm, or 120 mm when installed with accessory wall sleeve WH 100.AKE 150: Core hole drilling 155 mm, or 170 mm when installed with wall sleeve WH 150.Wall and ceiling mounting possible.Electrical ConnectionElectrical connection optionally surface-mounted or flush-mounted.Surface-mounted installation for AKE 100 with accessory spacer frame ECA-DR.Installation / Operation / Maintenance Wiring diagramsInstallation manual: pdf | onlineSafety instructions Small room fans: pdf | online ArticleAKE 150/1Air volume250 m³/hSpeed2,189 1/minSpeed controllable−Reversibility−SEC average-24.48 kWh/(m²*a)Type of currentAlternating currentRated voltage230 VMains frequency50 HzRated power19 WStand-by power consumption2 WIMax0.09 AProtection typeIP X4Power cable5 x 1.5 mm²Installation locationWallPlace of installationBasement / GarageType of installationSurface-mountedInstallation positionAnyMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.8 kgWeight with packaging2.37 kgNominal diameter150 mmCable length1.5 mWidth228 mmHeight228 mmDepth178.3 mmWidth with packaging303 mmHeight with packaging273 mmDepth with packaging303 mmWall thicknessmax. 0.85 m (if 1 m cable length is not sufficient, please order the 6 m sensor cable additionally)Medium temperature at IMax40 °CSound pressure level40 dB / Distance 3 m, free field conditions