Fliesenkreuze

Wedges for Pull Tabs – 100-Piece Refill Pack for the Intelmann Levelling SystemThe wedges are the core component of the Intelmann tile levelling system: when inserted into the pull tab, they create a defined tension that precisely pulls the tile to the level of the adjacent tile, reliably preventing edge offsets (lippage). Since wedges – unlike pull tabs – can be reused multiple times, this 100-piece refill pack is ideal for anyone who occasionally damages their wedges when removing them or wants to replenish their stock.Technical Details100 wedges made of impact-resistant polypropylene (PP). Compatible with all pull tabs of the Intelmann levelling system (1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm). The wedge is driven into the pull tab using the special pliers or by hand and, due to its wedge shape, generates uniform levelling pressure. After the adhesive has set, the wedge can be removed and reused for further tiles.Features & DataContents: 100 wedges (without pull tabs, without pliers)Compatibility: All Intelmann pull tabs (1.0–3.0 mm)Material: Polypropylene (PP), impact-resistantReusable: Yes (with careful removal)Item No.: RAN-KZ-100EAN: 4251161548085

Pull Tabs 1.0 mm – 300 Pieces Refill Pack for Small ProjectsFor smaller renovation projects or targeted restocking, Intelmann also offers the 1.0 mm pull tabs as a practical 300-piece pack. Ideal for DIY enthusiasts or small craft businesses who want to order flexibly as needed without storing large quantities.Technical Details300 pull tabs, 1.0 mm joint thickness, PP plastic. Compatible with all Intelmann wedges and the special pliers. Break point for clean tab removal after adhesive curing.Features & DataJoint Thickness: 1.0 mmContents: 300 pull tabs (without wedges, without pliers)Material: Polypropylene (PP)Item No.: RAN-ZL-10-SET2EAN: 4251161548221

Pull Tabs 1.0 mm – 500 Piece Refill Pack for the Leveling SystemIf the wedges are still in good condition but the pull tabs are used up: The Intelmann refill pack with 500 pull tabs in 1.0 mm is the economical addition to your existing leveling system. This way, you don’t have to buy the entire set again and reduce your material usage to what is necessary.Technical Details500 pull tabs made of high-quality PP plastic, joint thickness 1.0 mm. Compatible with all Intelmann wedges and the Intelmann special pliers. Break-off point for residue-free removal. Suitable for wall and floor tiles indoors and outdoors.Features & DataJoint thickness: 1.0 mmContents: 500 pull tabs (without wedges, without pliers)Material: Polypropylene (PP)Item no.: RAN-ZL-10-SET1EAN: 4251161548214

Tile Leveling System 1.0 mm – Large Set with 500 Pull Tabs and 100 WedgesFor large construction projects, commercial areas, or professional tiling companies, the Intelmann Leveling System SET3 in 1.0 mm is the most economical choice: 500 pull tabs and 100 reusable wedges are sufficient for areas of 60–80 m² and more. The system guarantees a uniformly level surface across the entire area without lippage.Technical DetailsBox dimensions: 42 × 34 × 13 cm, weight approx. 1,606 g. 1.0 mm pull tab made of impact-resistant PP with defined breaking point. Wedges are reusable multiple times (with careful removal). Pliers sold separately (e.g. from SET1). Suitable for all tile formats, indoors and outdoors.Features & DataJoint width: 1.0 mmContents: 500 pull tabs + 100 wedges (without pliers)Box dimensions: 42 × 34 × 13 cmWeight: approx. 1,606 gMaterial: Polypropylene (PP)Item no.: RAN-NS-10-SET3EAN: 4251161548115

Tile Leveling System 1.0 mm – Flexible Mixed Set with 125 Pull Tabs and 125 WedgesThe Intelmann Leveling System SET2 in 1.0 mm is the ideal solution for projects requiring a balanced ratio of pull tabs and wedges. With 125 pieces of each component, this set covers an area of approximately 15–20 m² and is especially suitable for medium-sized bathroom or kitchen projects. Includes a special plier for professional use.Technical DetailsThe 1.0 mm pull tab ensures minimal but precise joint width. The wedge levels height differences through even tension. Metal plier with defined stop for reproducible tension. Break off the tab at the predetermined breaking point after the adhesive has set.Features & DataJoint Width: 1.0 mmContents: 125 pull tabs + 125 wedges + 1 plierMaterial: PP plastic, metal plierItem No.: RAN-NS-10-SET2EAN: 4251161548108

Tile Leveling System 1.0 mm – Complete Set with Pliers for Even Tile SurfacesUnevenness between adjacent tiles is one of the most common – and costly – mistakes when laying tiles. The Intelmann Tile Leveling System systematically eliminates this problem: the tension clip and wedge work together to keep each tile flush at the same height until the adhesive sets. The result is a flat, professional surface without "waves" or edge offsets (so-called lippage).Technical DetailsThe SET1 includes 300 tension clips (1.0 mm joint width), 100 wedges, and a special plier for tightening the wedges. The tension clip is slid under the tile, the wedge is tightened with the pliers, pulling the tile to the level of the adjacent tile. After setting, the clip is broken off at the predetermined breaking point with a hammer blow. Box dimensions: 30 × 20 × 15 cm, weight approx. 1,275 g.Features & DataJoint width: 1.0 mmContents: 300 tension clips + 100 wedges + 1 plierBox dimensions: 30 × 20 × 15 cmWeight: approx. 1,275 gMaterial: PP plastic, metal plierItem no.: RAN-NS-10-SET1EAN: 4251161548092

Tile Spacers with Handle 1.0 mm – Comfortable Spacer with Removal HandleThe Intelmann tile spacers with handle in 1.0 mm joint width combine precise spacing with maximum ergonomics. The integrated handle allows for effortless insertion and removal of the spacers – without tools, without bending down, even in tight joint spaces. Especially for large areas, the handle saves considerable time and relieves the fingers and back of the installer.Technical DetailsIdentical accuracy to the standard type, complemented by a raised handle bar made from the same PP material. The handle protrudes above the tile surface and allows the removal of the spacers before the adhesive sets – ideal for porcelain stoneware and polished surfaces that do not tolerate adhesive residues.Features & DataJoint Width: 1.0 mmContents: 400 pieces per bagMaterial: Polypropylene (PP)Type: With handle (removal handle)Item No.: RAN-FKG-10EAN: 4251161547996

Tile Spacers 1.0 mm – Precise Joint Spacing for TilingFor a perfect tiling appearance, even joints are essential. The Intelmann tile spacers with a 1.0 mm joint width ensure that each tile is positioned at the exact distance from the next – for a professional result that even DIY enthusiasts can achieve effortlessly. Whether in the bathroom, kitchen, or living area: with these spacers, you can lay tiles quickly, cleanly, and consistently precisely.Technical DetailsThe tile spacers are made from high-quality, food-safe plastic (PP) and are temperature-resistant as well as break-proof. The cross design allows stable positioning on tile edges and corners alike. After the tile adhesive has set, they can be easily removed or left in place with liquid grout in the substrate.Features & DataJoint width: 1.0 mmContents: 500 pieces per bagMaterial: Polypropylene (PP)Type: Standard (without handle)Item no.: RAN-FK-10EAN: 4251161547927

Joint Wedges Size S – Precise Alignment of Wall TilesJoint wedges are indispensable aids when laying wall tiles: they hold the tile exactly in position until the adhesive has sufficiently set. The Intelmann joint wedges in size S are specially designed for small to medium-sized wall tiles and ensure an even height alignment without slipping – for a professional tiling finish from bottom to top.Technical DetailsThe wedges are slid from below under the tile and hold it at the desired height through clamping action. Made from flexible, durable PP plastic. Can be removed without residue after the adhesive has set. Compatible with all common spacers and tile crosses.Features & DataSize: S (Small)Contents: 250 pieces per bagMaterial: Polypropylene (PP)Application: Wall tiles, height adjustmentItem No.: RAN-KSEAN: 4251161548078