Diamond Core Drill Bits for Concrete, Reinforced Concrete and Masonry
In the category core drill bits you will find powerful diamond core drill bits for precise core drilling in professional use. Suitable for wet and dry cutting, long service life due to robust segmentation and clean cut edges for installation openings.
Features
- High cutting speed for concrete, reinforced concrete and brick
- Laser-welded segments for reliable durability
- Suitable for handheld machines and drill stands depending on the version
- Selection of common diameters for core drilling
Applications
- Installation openings for cables and pipes
- Core drilling in ceiling, wall and floor
- Renovation, conversion and new construction with precise drill channels
NEXT GENERATION Diamond Core Drill Concrete Effective Length 180 mm 152 mm Hexagon Long 200 mm
Premium diamond core drill bit with a usable length of 180 mmThis core drill bit is ideal for wet and dry cutting – it is an extremely efficient diamond core drill bit. For use with handheld machines, the diamond core drill bit with its laser-welded TURBO segments proves to be an exceptionally robust tool that should not be missing in any professional workshop. Especially the laser-welded segments with a height of 10 mm enable effective drilling progress, with segment loss being almost impossible. The professional diamond tool, equipped with an M16 mount, can be used on many building materials including concrete, reinforced concrete, and masonry. To offer high-quality diamond tools, we source our products exclusively from manufacturers who produce using the latest manufacturing techniques. Our greatest focus is on the safety and durability of our diamond products. Application area: Concrete Reinforced concrete Masonry Poroton Brick Aerated concrete (Ytong) Terracotta pipes etc. Features: Laser-welded TURBO segments Usable length 180 mm Mount M16 Segment height 10 mm Use: Drill or cordless screwdriver (e.g. from Bosch, Metabo, Einhell, Hitachi, Makita, etc.) Please note that you must not use any diamond core drill bits with a hammer function! With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
NEXT GENERATION diamond core drill bit concrete effective length 180 mm 112 mm SDS-plus short 100 mm with centre drill bit
Premium diamond core drill bit with a usable length of 180 mmThis core drill bit is ideal for wet and dry cutting – it is an extremely efficient diamond core drill bit. For use with handheld machines, the diamond core drill bit with its laser-welded TURBO segments proves to be an exceptionally robust tool that should not be missing in any professional workshop. Especially the laser-welded segments with a height of 10 mm enable effective drilling progress, with segment loss being almost impossible. The professional diamond tool, equipped with an M16 mount, can be used on many building materials including concrete, reinforced concrete, and masonry. To offer high-quality diamond tools, we source our products exclusively from manufacturers who produce using the latest manufacturing techniques. Our greatest focus is on the safety and durability of our diamond products. Application area: Concrete Reinforced concrete Masonry Poroton Brick Aerated concrete (Ytong) Terracotta pipes etc. Features: Laser-welded TURBO segments Usable length 180 mm Mount M16 Segment height 10 mm Use: Drill or cordless screwdriver (e.g. from Bosch, Metabo, Einhell, Hitachi, Makita, etc.) Please note that you must not use any diamond core drill bits with a hammer function! With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
NEXT GENERATION Diamond Core Drill Concrete Effective Length 180 mm 68 mm Hexagon Long 200 mm
Premium diamond core drill bit with a usable length of 180 mmThis core drill bit is ideal for wet and dry cutting – it is an extremely efficient diamond core drill bit. For use with handheld machines, the diamond core drill bit with its laser-welded TURBO segments proves to be an exceptionally robust tool that should not be missing in any professional workshop. Especially the segments attached by laser welding with a height of 10 mm enable effective drilling progress, with segment loss being almost impossible. The professional diamond tool, equipped with an M16 mount, can be used on many building materials including concrete, reinforced concrete, and masonry. To offer high-quality diamond tools, we source our products exclusively from manufacturers who produce using the latest manufacturing techniques. Our greatest focus is on the safety and durability of our diamond products. Application area: Concrete Reinforced concrete Masonry Poroton Brick Aerated concrete (Ytong) Terra cotta pipes etc. Features: Laser-welded TURBO segments Usable length 180 mm Mount M16 Segment height 10 mm Use: Drill or cordless screwdriver (e.g. from Bosch, Metabo, Einhell, Hitachi, Makita, etc.) Please note that you must not use any diamond core drill bits with hammer action! With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill 82mm with SDS-plus shank, effective length 80 mm
Diamond Core Drill with SDS-plus Shank, Effective Length 80 mm Excellent drilling comfort compared to conventional premium tools. Extremely smooth and consistent cutting performance even under extreme conditions throughout the entire service life. Features: Special turbo-segmented, laser-welded, segment height 10 mm, SDS-plus shank with centring drill bit Application Area: Masonry Hollow bricks Solid bricks Calcium silicate bricks with a raw density up to 2.0 Poroton Abrasive concrete products With us, you will receive exclusively diamond tools from quality manufacturers, produced using the latest manufacturing techniques.
Diamond Core Drill Bit M16 Mounting Usable Length 180 mm Ø 127 mm with Centre Drill
BTEC Diamond Core Drill Bit Concrete M16 SDS+ Hex Ø 32-202 mm 180 mm NL Dry Core Drill Bit The diamond core drill bits from BTEC are ideally suited for use in conventional drills or cordless screwdrivers. They allow for easy freehand dry drilling. Thanks to the laser-welded segments, segment loss is almost impossible, enabling fast drilling progress in materials such as concrete, lightly reinforced concrete, masonry, and Poroton. Bricks, aerated concrete, clay pipes, and other materials can also be drilled effortlessly. Various adapters such as SDS+ 100 mm / 200 mm or hex shanks in 100 mm or 200 mm length are available for numerous applications. Application: The core drill bits are suitable for drills or cordless screwdrivers from brands such as Bosch, Metabo, Einhell, Hitachi, Makita, and more. Note: Never use the diamond core drill bits with the hammer drill function! With us, you will only receive diamond tools from quality manufacturers who produce according to the latest manufacturing techniques.
NEXT GENERATION Diamond Core Drill Concrete Effective Length 180 mm 82 mm SDS-plus long 200 mm
Premium diamond core drill bit with a usable length of 180 mmThis core drill bit is ideal for wet and dry cutting – it is an extremely efficient diamond core drill bit. For use with handheld machines, the diamond core drill bit with its laser-welded TURBO segments proves to be an exceptionally robust tool that should not be missing in any professional workshop. Especially the laser-welded segments with a height of 10 mm enable effective drilling progress, with segment loss being almost impossible. The professional diamond tool, equipped with an M16 mount, can be used on many building materials including concrete, reinforced concrete, and masonry. To offer high-quality diamond tools, we source our products exclusively from manufacturers who produce using the latest manufacturing techniques. Our greatest focus is on the safety and durability of our diamond products. Application area: Concrete Reinforced concrete Masonry Poroton Brick Aerated concrete (Ytong) Terracotta pipes etc. Features: Laser-welded TURBO segments Usable length 180 mm Mount M16 Segment height 10 mm Use: Drill or cordless screwdriver (e.g. from Bosch, Metabo, Einhell, Hitachi, Makita, etc.) Please note that you must not use any diamond core drill bits with hammer action! With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit for tile drilling for angle grinders 38 mm
Diamond core drill dry cut for angle grinders (M14 mount). Unique drilling progress without water cooling for quickly creating clean holes in a wide variety of materials. This core drill combines the highest quality standards in an attractive price range. This tile drill is an almost indispensable tool for all tiling work. Application area: Porcelain stoneware Ceramics Granite tiles Tiles Hard floor tiles Natural stone tiles Glazed clinker Hard roof tiles Clinker slips Plastics GRP etc. Use: Angle grinder (M14 mount) Features: 10 mm high electroplated vacuum diamond coating M14 mount for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Ø 5-14 mm usable length 35 mm from Ø 20 mm usable length 50 mm Special features: Fast, clean and precise drilling progress in the hardest tiles No water required Effortless freehand drilling possible Tip: Light wobbling movement and cooling after drilling increases the service life! By angling the drill, working without a pilot hole is easily possible. The diamond coating is both inside and outside, so no more jamming or seizing of the drill core. With us, you will receive exclusively diamond tools from quality manufacturers who produce according to the latest manufacturing techniques.
Diamond core drill bit for tile drilling for angle grinders 28 mm
Diamond core drill dry cut for angle grinders (M14 mount). Unique drilling progress without water cooling for quickly creating clean holes in a wide variety of materials. This core drill combines the highest quality standards in an attractive price range. This tile drill is an almost indispensable tool for all tiling work. Application area: Porcelain stoneware Ceramics Granite tiles Tiles Hard floor tiles Natural stone tiles Glazed clinker Hard roof tiles Clinker slips Plastics GRP etc. Use: Angle grinder (M14 mount) Features: 10 mm high electroplated vacuum diamond coating M14 mount for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Ø 5-14 mm usable length 35 mm From Ø 20 mm usable length 50 mm Special features: Fast, clean and precise drilling progress in the hardest tiles No water required Effortless freehand drilling possible Tip: Light wobbling movement and cooling after drilling increases the service life! By angling the drill, working without a pilot hole is easily possible. The diamond coating is both inside and outside, so no more jamming or seizing of the drill core. With us, you will only receive diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond drill bit for tile drilling for angle grinders 5 mm
Diamond core drill dry cut for angle grinders (M14 mount). Unique drilling progress without water cooling for quickly creating clean holes in a variety of materials. This core drill combines the highest quality standards in an attractive price range. This tile drill is an almost indispensable tool for all tiling work. Application area: Porcelain stoneware Ceramics Granite tiles Tiles Hard floor tiles Natural stone tiles Glazed clinker Hard roof tiles Clinker slips Plastics GRP etc. Use: Angle grinder (M14 mount) Features: 10 mm high electroplated vacuum diamond coating M14 mount for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Ø 5-14 mm usable length 35 mm From Ø 20 mm usable length 50 mm Special features: Fast, clean and precise drilling progress in the hardest tiles No water required Effortless freehand drilling possible Tip: Light wobbling motion and cooling after drilling increases the service life! By angling the drill, working without a pilot hole is easily possible. The diamond coating is both inside and outside, so no more jamming or seizing of the drill core. With us, you will receive exclusively diamond tools from quality manufacturers who produce according to the latest manufacturing techniques.
Diamond core drill vacuum, bit holder, special cooling core 5 mm
With a service life at least 5 times longer than conventional diamond drill bits, thanks to new vacuum production techniques and thus a denser diamond coating. Diamond drill bit, dry cutting, for cordless screwdrivers and drills for fast drilling of tiles and similar building materials. Application area: Porcelain stoneware Ceramics Natural stone tiles Tiles Hard floor tiles Granite tiles Glazed clinker Hard roof tiles Clinker slips Plastic GRP etc. Use: Standard cordless screwdrivers and drills Features: Fast drilling, excellent handling, effortless, freehand processing of building materials Special features: The drill bits are equipped with a special cooling core that prevents rapid overheating of the drill bit. With us, you will receive exclusively diamond tools from quality manufacturers who produce according to the latest manufacturing techniques.
Diamond Core Drill Bit Angle Grinder M14 Mount 150 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. As a result, this diamond tool has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 mount) Features: Electroplated vacuum diamond coating M14 mount for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 130 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. As a result, this diamond tool has a service life that is five times longer than that of conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is approximately 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 125 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry core drill that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile core drill is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drills – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor wedging of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Bit Angle Grinder M14 Mount 120 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than that of conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Bit Angle Grinder M14 Mount 110 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Angle Grinder M14 Mount 100 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Angle Grinder M14 Mount 95 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 90 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. As a result, this diamond tool has a service life that is five times longer than that of conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 85 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than that of conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is approximately 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Bit Angle Grinder M14 Mount 82 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill angle grinder M14 mount 75 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than that of conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill angle grinder M14 mount 68 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is approximately 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill angle grinder M14 mount 65 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill angle grinder M14 mount 50 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor wedging of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 40 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 38 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. As a result, this diamond tool has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is approximately 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a pilot drill guide. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure are good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond Core Drill Bit Angle Grinder M14 Mount 35 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 32 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. In addition, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor wedging of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 30 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that allows flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler's toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes, etc. Use: Angle grinder (M14 fitting) Features: Galvanic vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor wedging of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We offer the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.
Diamond core drill bit angle grinder M14 mount 28 mm
Diamond Core Drill M14 Premium The Diamond Core Drill M14 Premium is a dry drill bit that enables flawless and clean drilling in tiles and other materials (marble, granite, clinker slips, roof ceramics, plastic, etc.) without the need for water supply. Thanks to the M14 connection, this tile drill bit is suitable for all common angle grinders and should therefore be an essential part of every tiler’s toolbox. The M14 Premium dry core drill is manufactured using a special vacuum brazing process. This diamond tool therefore has a service life that is five times longer than conventional tile drill bits – premium-plus quality as only a high-quality diamond tool can offer. Application area: Porcelain stoneware Granite, granite slabs Marble Ceramic tiles Natural stone tiles Stoneware Glazed clinker Roof ceramics Clinker slips Plastic Clay pipes etc. Use: Angle grinder (M14 fitting) Features: Electroplated vacuum diamond coating M14 fitting for all common angle grinders Dust binding and cooling through special wax inside for diameters from 5 to 14 mm Effective length 35 mm Special characteristics: No water required Effortless freehand drilling possible The drilling performance in porcelain stoneware is about 1 cm in 10 to 15 seconds. Even in very hard materials such as granite, the M14 tile core drill drills extremely quickly. Additionally, setup times are very short, saving real money in the long run. Some tips for handling the Diamond Core Drill M14 Premium: The recommended speed for the tile drill is about 11,000 revolutions per minute If the tile drill is applied at an angle, it can be used without a drilling aid. Thanks to the very dense diamond coating applied both inside and outside (each 15 mm), neither jamming nor binding of the drill core occurs A slight wobbling motion and only moderate pressure is good for the service life of the dry core drill After drilling, the diamond tool should be cooled in water. This also increases durability We stock the tile core drill in many different sizes from 5 mm to 150 mm diameter. With us, you will receive exclusively diamond tools from quality manufacturers who produce using the latest manufacturing techniques.