Sealing Compound MEZ-PLAST 580 – 310 ml, silver greyThe Sealing Compound MEZ-PLAST 580 is a high-quality, permanently elastic sealant for reliable sealing of air duct systems and technical installations. It is ideally suited for use in ventilation duct construction, plant engineering, and hygienically sensitive areas.The sealant is based on acrylic resin (solvent-crosslinking) and impresses with very good adhesion to metals – even on slightly oily or corrosion-protected surfaces, without the need for prior degreasing.Advantages at a glance:✅ Silicone-free – No silicone residues✅ Very good adhesion – Also on slightly oily and metallic surfaces✅ Permanently elastic – For long-lasting seals✅ Fast curing – Efficient processing✅ Chemical resistant – Suitable for technical applications✅ VDI 6022 compliant – For hygienic requirements in ventilation systems✅ Food safe – Free from lead, chromium and harmful substancesProduct properties:✔ Adheres to all metals✔ Ageing, UV and weather resistant✔ Antibacterial and fungicidal (against fungal infestation)✔ Toxicologically safe✔ Paintable (pre-tests recommended)✔ CFC-free, no AOX components✔ Free from lead, mercury and chromium compoundsTechnical details:✔ Product name: MEZ-PLAST 580✔ Packaging: Cartridge 310 ml✔ Colour: Silver grey✔ Raw material base: Acrylic resin, solvent-crosslinking✔ Curing: approx. 4 mm / 24 h at +23 °C, 50 % r.H.✔ Skin formation time: approx. 10 minutes✔ Shore A hardness: 38✔ Density: approx. 1.05 g/cm³✔ Temperature resistance:– permanent: −40 °C to +80 °C– short-term: up to +100 °C (max. 1 h)✔ Processing temperature: +2 °C to +60 °C✔ Shelf life: approx. 12 months✔ Storage: store frost-freeAssembly & processing:– Ready to use, no mixing required– Application with brush, spatula or spray equipment– Also suitable for slightly oily substrates– Overpaintable after complete curing– Slight material shrinkage possibleAreas of application:– Sealing of ventilation ducts and air duct systems– Plant and apparatus construction– Cleanrooms and industrial applications (e.g. chip manufacturing)– Bonding and sealing of metal jointsThe Sealing Compound MEZ-PLAST 580 offers a powerful, versatile and hygienically safe solution for professional sealing in ventilation and plant engineering.

Nordsil® MS Coloured High-quality universal hybrid sealant and adhesive Product descriptionNordsil® MS Coloured is a high-quality universal sealant and adhesive specially developed for professional use, based on hybrid technology, which cures under the influence of moisture to form a permanently elastic rubber compound.Application Fields of applicationNordsil® MS Coloured was developed as a universal sealant for the permanently elastic sealing of connection joints and for the building trade and industry. Universal construction adhesive for bonding a wide range of building materials such as stone, concrete, glass, plasterboard, PU, PVC, hard plastics, glazed surfaces, ceramics, copper, lead, zinc, aluminium, metals, alloys, stainless steel, HPL and cement fibre boards, wood and intact painted surfaces. For grouting wall and floor areas in food processing companies or in food-related areas, e.g. cold stores Restrictions on useNot suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene - Not suitable for natural stone and mirrors - Not suitable in combination with chlorides (pools) Advantages - Universal adhesive and sealant for indoor and outdoor use - Permanently elastic - Isocyanate, solvent and silicone-free - Shrink and bubble-free - Excellent UV, weather, moisture and mould resistance - Perfect adhesion without primer on most substrates, even damp ones - Neutral cross-linking, virtually odourless - Non-corrosive in combination with metals - High mechanical strength, final strength and high modulus of elasticity - Absorbs acoustic and mechanical vibrations General instructions Apply the adhesive in even vertical lines at intervals of 10-20 cm. Do not apply the adhesive in dots! The use of 3mm thick double-sided adhesive tape is recommended to aid adhesion in the first 24 hours and to ensure that the adhesive layer has the correct thickness. For further information, please contact our technical staff. Application instructions Application temperature +5°C to +40°C (applies to environment and substrates). All surfaces must be firm, clean and free of grease and dust. Clean surfaces with Dowsil Cleaner R40. Nordsil® MS Coloured adheres perfectly to most non-porous substrates even without a primer. Porous, absorbent surfaces must be pre-treated with Dowsil Primer P. Adhesion should always be tested before application. Smooth joints with NKF READY smoothing agent Can be painted over Nordsil® MS Coloured can be painted over with water-based and most 2-component paints. Drying may be delayed with synthetic paints. It is advisable to test compatibility with the relevant colours before application. If Nordsil® MS Coloured is to be painted over (generally not necessary), we recommend lightly sanding the sealant and the adjacent edges with Scotch-Brite before application. To achieve optimum results, we recommend painting over the sealant within a few days of application.PropertiesOne-component installation adhesive based on MS polymer in coloured formulation, fast initial adhesion, can be painted over, sanded, can be painted over wet-on-wet, processing temperature +5°C to +40°C, curing time (23°C, 50% rel. LF) 1 day: 2.0 mm - 7 day: 7 mm, permanently elastic bonding, permissible total deformation DIN 52455-3 +/-25 %

The spray is suitable for re-galvanising and repairing damaged areas on galvanised parts, welds and interfaces in steel construction and the hobby sector. It takes on the task of corrosion protection and, due to its colour similarity with freshly galvanised materials, creates an optical balance. Gebhardt-Stahl Zink-Alu-Spray is a quick-drying anti-corrosion coating based on selected binders with a very high solids content. Fast drying High coverage, therefore economical to use Suitable substrates are steel, cast iron, aluminium, zinc and many more.

Sealing Compound MEZ-PLAST 590 SMP – 300 ml, silver greyThe Sealing Compound MEZ-PLAST 590 SMP is a high-quality, elastic and fast-curing one-component sealant for professional use in HVAC systems (Heating, Ventilation, and Air Conditioning). It meets the highest standards for hygiene, emission behaviour, and sustainability.Tested according to DIN EN ISO 846 and suitable for applications in accordance with VDI 6022 and EN 15780, this sealant is ideal for ventilation systems, clean rooms, and grease extraction systems.Advantages at a glance:✅ Suitable for HVAC systems – VDI 6022 / EN 15780 compliant✅ Low emissions (EC 1 Plus) – For sustainable construction (DGNB 2018)✅ Fast curing – Short waiting times✅ Durably elastic – For long-lasting seals✅ Fungicidal & bactericidal – Hygienically safe✅ Silicone-free, solvent-free & isocyanate-free✅ Non-corrosive – Suitable for metalProduct features:✔ Very low shrinkage✔ Good weather and ageing resistance✔ Fast skin formation✔ High temperature resistance✔ Toxicologically safeTechnical details:✔ Product name: MEZ-PLAST 590 SMP✔ Packaging: Cartridge 300 ml✔ Colour: Silver grey✔ System: 1-component SMP sealant✔ Skin formation: approx. 15–20 minutes✔ Curing depth: approx. 3–4 mm / 24 h✔ Processing temperature: +5 °C to +35 °C✔ Temperature resistance: −40 °C to +90 °C✔ Storage life: approx. 12 monthsStandards & Environment:✔ DIN EN ISO 846 – microbiological resistance✔ VDI 6022 / EN 15780 – hygiene in HVAC systems✔ EC 1 Plus – very low emissions✔ DGNB 2018 compliant – sustainable construction✔ REACH compliant – SVHC ≤ 0.1 %Application & areas of use:– Sealing in ventilation and air conditioning systems– HVAC systems– Clean rooms– Grease extraction systems– Plant and apparatus constructionWith the MEZ-PLAST 590 SMP sealing compound, you receive a powerful, hygienically safe, and environmentally friendly solution for professional sealing in sensitive ventilation and plant areas.