Application For fastening spiral ducts Your advantages Suitable clamping ranges for all spiral ducts (standard) Catch lock: quick and easy insertion and fastening of the pipe using the catch lock up to a nominal pipe diameter of 450 mm, from a nominal pipe diameter of 500 mm with M8 hexagon head screw Easy installation of the ventilation clamp thanks to the wide opening angle of the pipe clamp Stiffening of the ventilation clamp due to bead geometry Easy engagement of the screw plug with a fingertip High level of safety thanks to edge-locking suspension opening No uncontrolled opening after engaging thanks to safety catch lock The easy-to-engage lock allows the pipe clamp to be opened and closed with just one hand With highly elastic DÄMMGULAST® sound insulation insert: average sound level improvement of 18 dB(A) M8/M10 threaded connections customised to the application This product has been awarded the "pipe fastening quality mark" and is subject to external monitoring in accordance with RAL-GZ 655-B

The connecting sleeve is used to connect a fan to a round air duct (spiral duct) with the same diameter. At the same time, it absorbs vibrations from the fan to the ventilation duct. The advantage of this type of connection is that the fan can be removed from the air duct system at any time for replacement or repair. The sleeve is made of galvanised sheet steel, fitted with a foam rubber seal with a thickness of 6 millimetres on the inside. There are two M6 screws at the ends of the adjusting ring for fixing the sleeve: screws and nuts are part of the product.

Galvanised pipe clamp 1-piece for spiral ducts without insert Material: steel For fastening ventilation ducts

Stainless steel pipe clampsApplicationFor fastening spiral ductsYour advantagesSuitable clamping ranges for all spiral ducts (standard)Catch lock: quick and easy insertion and fastening of the pipe thanks to the catch lock up to a nominal pipe diameter of 450 mm, from a nominal pipe diameter of 500 mm with M8 hexagon head screwEasy installation of the ventilation clamp thanks to the wide opening angle of the pipe clampStiffening of the ventilation clamp due to bead geometryEasy engagement of the screw plug with a fingertipHigh level of safety due to edge-locking suspension openingNo uncontrolled opening after engaging thanks to safety catch lockThe easy-to-engage lock allows the pipe clamp to be opened and closed with just one handWith highly elastic DÄMMGULAST® sound insulation insert: average sound level improvement of 18 dB(A)M8 threaded connections customised to the applicationThis product has been awarded the "pipe fastening quality mark" and is subject to external monitoring in accordance with RAL-GZ 655-B

Fixing clamp MT-LS160 for mounting MAICOTherm, DN160Features:Quality Made in GermanyFixing clip with M8 threaded socket - for easy installation. Two-part fixing clip with pre-assembled clamping screw. With hinge screw for secure and simple quick-lock installation. Can be mounted by hanging without tools.Attractive design with galvanised sheet steel - Compatible with any interior style Suitable for continuous operation.Description:Two-part fixing clip with pre-assembled clamping screws for mounting the MAICOTherm MT thermally insulated ventilation pipe system. Equipped with hinged screw for secure and simple quick-lock installation. Quick installation as the pipes/elbows can be attached without tools kann.Artikel: MT-LS160, Air direction: Ventilation, Installation location: Ceiling / wall / floor, Material: Sheet steel, galvanised, Weight: 0.18 kg, Weight with packaging: 0.2 kg, Nominal width: 160 mm, Suitable for nominal width: 200 mm, Width: 260 mm, Height: 145 mm, Depth: 20 mm, Width with packaging: 260 mm, Height with packaging: 145 mm, Depth with packaging: 20 mm, Thread: M8

Heavy-duty clamps with sound insulation insert, 108 - 118 mmwith 2 M10x30mm screw plugsSteel, galvanisedSound insulation for DIN 4109Temperature resistance -50°C to 110°CConnection thread M12Material thickness: 40 x 4.0mmWorking load 5.0 KN

Pipe clamps to DIN 3567, form A, 108 mm, DN 100Dimensionally stable due to cold formingRounded endsBlack version (other versions on request)without screwsDrill hole diameter: 17 mmRecommended working load at 150°C: 9.0 KNMaterial dimensions: 50 x 8 mm

MF-S90 fixing clamp for mounting MF-F90 flexible pipeFeatures:Quality Made in GermanyFastening clip with threaded socket M8/M10 - for easy installation. Fastening clamp for installing MF-F flexible ducts, especially in renovation projects or new builds. Quick installation possible without tools.Attractive design - compatible with any interior style Suitable for continuous operation. Description:Fixing clamps for installing the MF-F flexible conduits, particularly in renovation projects, but can also be used in new builds. Quick installation, as the pipes can be attached without tools ##########_0__: MF-S90, Air direction: Ventilation, Installation location: Ceiling / wall / floor, Material: Sheet steel, galvanised, Weight: 0.035 kg, Weight with packaging: 0.035 kg, Suitable for nominal width: 90 mm, Width: 115 mm, Height: 128 mm, Depth: 25 mm, Width with packaging: 115 mm, Height with packaging: 128 mm, Depth with packaging: 25 mm, Thread: M8 / M10, Width across flats: SW 17

Stainless steel pipe clamps (A2) with sound insulation insert, 4", 102 - 116 mm, M 8 / M 10with 2 screw plugs (2-piece) and sound insulation insertSound insulation for DIN 4109Temperature resistance -50°C to +110°CCaptive and screwdriver-compatible screw plugs

Mounting clamp BS 160 for roof duct, connection DN160Features:Quality Made in GermanyFixing clip - for simple ventilation and air extractionFor the supply or exhaust air ducting of fans or ventilation systems. No static pressure loss. With condensation drainage. Reductions must be provided by the customer. Attractive design - compatible with any interior style Suitable for continuous operation.Description:For the supply or extract air ducting of fans or ventilation systems. DP ... A: Suitable for flat roofs. DP ... TB, DP ... SB, BS ..., RG ..., DF ...: Suitable for pitched roofs from 25° to 45°. Material: Roof duct DF ... in polypropylene. Roof tiles for pitched roofs in polyethylene, except DP 125 TB in lead. Roof tiles for flat roofs in aluminium. No static pressure loss. With condensation drainage. Reductions must be provided by the customer. The use of the roof tile DP is necessary. The use of the type BS fixing clamp for wind pressure-resistant installation on the roof is recommended. For flat roof construction: For warm roofs, order 2 roof tiles DP ... A for warm roofs. For cold roofs, only 1 roof tile DP ... A bestellen.Artikel: BS 160, Air direction: Ventilation, Material: Sheet steel, Colour: Galvanised, Weight: 0.158 kg, Weight with packaging: 0.166 kg, Nominal width: 160 mm, Width: 200 mm, Height: 200 mm, Depth: 200 mm, Width with packaging: 200 mm, Height with packaging: 20 mm, Depth with packaging: 200 mm, Suitable for box ventilators: no, Suitable for roof ventilators: no, Suitable for duct ventilators: no, Suitable for heat recovery systems: yes, Suitable for wall-mounted ventilators: yes, Suitable for wall-mounted ventilators: no, Suitable for domestic ventilators: yes, Suitable for centrifugal ventilators: no, Suitable for circulation ventilators: no

Screw pipe clamps with sound insulation insert, 4 inch, 102-116 mmTwo-bolt articulated pipe clamp with practical lockSteel, galvanisedSound insulation for DIN 4109Temperature resistance -50°C to +110°CCaptive and screwdriver-friendly screw plugsWelded stepped nut M8/M10Material thickness: 25 x 2.0 mmWorking load 1.5 KN

Pipe clamps with tilting screw and sound insulation insert, 1/4 inch, 12-16 mmQuick installation thanks to one-handed operationSteel, galvanisedSound insulation for DIN 4109Temperature resistance -50°C to +110°CCaptive and screwdriver-friendly screw plugsWelded-on connection nut M8Material thickness: 20 x 1.2 mmWorking load 1.2 KN

Screw pipe clamps with sound insulation insert, 101-106 mmwith 2 screw plugsSteel, galvanisedSound insulation for DIN 4109Temperature resistance -50°C to 110°CCaptive and screwdriver-friendly screw plugsConnection thread M8/M10Material thickness: 20 x 1.5mmWorking load 1.9 KN

Pin pipe clamps without sound insulation insert, 3/8 inch, 15 - 19 mmSteel, galvanisedDrive-in clamps with riveted square pinPin length 80 mmCaptive and screwdriver-friendly screw plugsMaterial dimensions: 20 x 1.25 mm