X2 condenser as a spare part for various ECA 100 ipro and ECA piano small room fans and for various ER 60, ER 100, ER-AP and ER-APB fan inserts to eliminate fault behaviour.Article: KS ECA ER, Rated voltage: 250 V, Mains frequency: 50 Hz, Housing material: plastic, Colour: black, Weight: 0.01 kg, Weight with packaging: 0.02 kg, Width: 27 mm, Height: 120 mm, Depth: 9 mm, Width with packaging: 130 mm, Height with packaging: 140 mm, Depth with packaging: 11 mm

Humidity sensor as spare part for various small room fans of the ECA 100 ipro groups and various ventilation units with heat recovery of the Trio, WS 160 Flat, WS 170 and WS 300 groups Flat.Artikel: SE ECA 100 ipro H, material housing: plastic, colour: white, weight: 0.01 kg, weight with packaging: 0.05 kg, width: 25 mm, height: 35 mm, depth: 17 mm, width with packaging: 175 mm, height with packaging: 250 mm, depth with packaging: 25 mm

Cover with fixed inner grille as spare part for various small room fans of the ECA group 100.Artikel: ABD ECA 100 1, material housing: plastic, colour: traffic white, similar to RAL 9016, weight: 0.08 kg, weight with packaging: 0.21 kg, width: 150 mm, height: 150 mm, depth: 35 mm, width with packaging: 175 mm, height with packaging: 175 mm, depth with packaging: 160 mm

Cover with electrically operated inner lock as spare part for various small room fans of the ECA 100 group K.Artikel: ABDK ECA 100 1, material housing: plastic, colour: traffic white, similar to RAL 9016, weight: 0.08 kg, weight with packaging: 0.21 kg, width: 150 mm, height: 150 mm, depth: 35 mm, width with packaging: 175 mm, height with packaging: 160 mm, depth with packaging: 175 mm

4-pin terminal strip as a spare part for various flush-mounted housings of the ER UP, ER GH groups and surface-mounted fans of the ER-AP group, ER-APB.Artikel: KL ER, Housing material: plastic, Colour: green, Weight: 0.01 kg, Weight with packaging: 0.08 kg, Width: 13 mm, Height: 12 mm, Depth: 20 mm, Width with packaging: 180 mm, Height with packaging: 17 mm, Depth with packaging: 250 mm

Cover as spare part for various small room fans of the ECA 100 ipro group in the standard version, radio receiver, adjustable switch-on delay and run-on time, fresh air diffusers ALD 125../ALD 160.., supply and extract air valve AZV 100. Concealed intake through Designabdeckung.Artikel: ABD ECA 100 ipro 1, Housing material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.14 kg, Weight with packaging: 0.24 kg, Width: 160 mm, Height: 160 mm, Depth: 50 mm, Width with packaging: 175 mm, Height with packaging: 175 mm, Depth with packaging: 160 mm

Circuit board as spare part for fan inserts ER 60 VZ, ER-AP 60 VZ and ER-APB 60 VZ. For versions with delay ##########_0__: PL ER 60 VZ, weight: 0.06 kg, weight with packaging: 0.13 kg, width: 45 mm, height: 30 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Flap frame with electrically operated internal lock as spare part for various small room fans of the ECA 100 ipro group K.Artikel: KR ECA 100 ipro, Housing material: plastic, Colour: white, Weight: 0.05 kg, Weight with packaging: 0.18 kg, Width: 118 mm, Height: 20 mm, Depth: 128 mm, Width with packaging: 175 mm, Height with packaging: 160 mm, Depth with packaging: 175 mm

Fan insert as spare part for surface-mounted fan, fire protection ER-APB 60 VZ. Version with delay##########_0__: VE ER-APB 60 VZ, Version: Delay timer, Delivery volume: 61 m3/h, Speed: 1250 1/min, Speed controllable: no, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, rated power: 21 W, IMax: 0.17 A, colour: white, weight: 1.02 kg, weight with packaging: 1.32 kg, width: 215 mm, height: 110 mm, depth: 215 mm, width with packaging: 270 mm, height with packaging: 155 mm, depth with packaging: 280 mm

Circuit board with electronics cover as spare part for various small room fans of the ECA 100 group ipro.Artikel: PL ABDE ECA 100 ipro F/H/B, weight: 0.04 kg, weight with packaging: 0.12 kg, width: 20 mm, height: 20 mm, depth: 125 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Flap support with non-return flap made of plastic as a spare part for flush-mounted housings ER GH and ER-UP/G and various surface-mounted fans of the ER-AP.Artikel: KA RK K group, Housing material: plastic, Colour: black, Weight: 0.02 kg, Weight with packaging: 0.13 kg, Width: 84 mm, Height: 47 mm, Depth: 84 mm, Width with packaging: 170 mm, Height with packaging: 155 mm, Depth with packaging: 170 mm

Housing with cover, filter and timestrip as spare part for various surface-mounted fans of groups ER-AP, ER-APB and surface-mounted exhaust air elements of group Centro-APB.Artikel: GH AP ER 60/100/Centro, Housing material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.55 kg, Weight with packaging: 0.76 kg, Filter class: ISO Coarse 30 % (G2), Width: 230 mm, Height: 140 mm, Depth: 230 mm, Width with packaging: 270 mm, Height with packaging: 155 mm, Depth with packaging: 280 mm

Cover with electrically operated inner lock as spare part for small room fans of the ECA 120 group K.Artikel: ABDK ECA 120 1, material housing: plastic, colour: traffic white, similar to RAL 9016, weight: 0.12 kg, weight with packaging: 0.28 kg, width: 175 mm, height: 35 mm, depth: 175 mm, width with packaging: 245 mm, height with packaging: 130 mm, depth with packaging: 320 mm

Circuit board as spare part for fan insert ER 100 VZC. For version with adjustable delay ##########_0__: PL ER 100 VZC, weight: 0.05 kg, weight with packaging: 0.13 kg, width: 45 mm, height: 30 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Circuit board with electronics cover as spare part for small room fan ECA piano H. For version with Feuchtesteuerung.Artikel: PL ABDE ECA piano H, weight: 0.05 kg, weight with packaging: 0.15 kg, width: 58 mm, height: 30 mm, depth: 58 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Circuit board as spare part for fan units ER 60 G, ER-AP 60 G and ER-APB 60 G. For versions with Grundlastschaltung.Artikel: PL ER 60 G, weight: 0.08 kg, weight with packaging: 0.15 kg, width: 45 mm, height: 33 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Fan as a spare part for the WS 75 semi-centralised ventilation units. Electrical plug-in connection for quick installation of the fan in the ventilation unit. Easy-to-install snap-on fastening of the fan. Robust, energy-saving EC motor. Maintenance-free, with closed Kugellagern.Artikel on both sides: V WS 75, weight: 0.6 kg, weight with packaging: 0.82 kg, width: 200 mm, height: 205 mm, depth: 115 mm, width with packaging: 280 mm, height with packaging: 280 mm, depth with packaging: 155 mm

Circuit board as spare part for fan unit ER 60 GVZ. For version with base load and deceleration ##########_0__: PL ER 60 GVZ, weight: 0.09 kg, weight with packaging: 0.17 kg, width: 45 mm, height: 35 mm, depth: 116 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Circuit board as spare part for various small room fans of the ECA 100 and ECA 120 groups. For versions with delay: PL ECA 100/120 VZ, weight: 0.01 kg, weight with packaging: 0.1 kg, width: 20 mm, height: 15 mm, depth: 116 mm, width with packaging: 190 mm, height with packaging: 40 mm, depth with packaging: 135 mm

Thermo-bimetal as spare part for various small room fans of the ECA 150 group K.Artikel: TB ECA 150 K, weight: 0.01 kg, weight with packaging: 0.06 kg, width: 8 mm, height: 6 mm, depth: 83 mm, width with packaging: 175 mm, height with packaging: 10 mm, depth with packaging: 250 mm

Cover with fixed inner grille as spare part for various small room fans of the ECA group 120.Artikel: ABD ECA 120 1, material housing: plastic, colour: traffic white, similar to RAL 9016, weight: 0.12 kg, weight with packaging: 0.29 kg, width: 175 mm, height: 34 mm, depth: 175 mm, width with packaging: 245 mm, height with packaging: 130 mm, depth with packaging: 320 mm

Circuit board as spare part for fan inserts ER 60, ER-AP 60 and ER-APB 60. For standard versions: PL ER 60, weight: 0.04 kg, weight with packaging: 0.11 kg, width: 45 mm, height: 30 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Circuit board as spare part for fan insert ER 60 VZ 15. For version with delay timer 15 min Nachlauf.Artikel: PL ER 60 VZ 15, weight: 0.05 kg, weight with packaging: 0.13 kg, width: 45 mm, height: 30 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Circuit board as spare part for various small room fans of the ECA 100 and ECA 120 groups. For version with Lichtsteuerung.Artikel: PL ECA 100/120 F, weight: 0.01 kg, weight with packaging: 0.1 kg, width: 20 mm, height: 15 mm, depth: 116 mm, width with packaging: 190 mm, height with packaging: 40 mm, depth with packaging: 135 mm

PCB with electronics cover as a spare part for ECA 100 ipro and ECA 100 ipro K small room fans. For standard versions ##########_0__: PL ABDE ECA 100 ipro, weight: 0.03 kg, weight with packaging: 0.12 kg, width: 18 mm, height: 13 mm, depth: 127 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Humidity sensor as spare part for various ECA 150 small room fans ipro.Artikel: SE ECA 150 ipro H, Housing material: plastic, Colour: white, Weight: 0.07 kg, Weight with packaging: 0.06 kg, Width: 32.5 mm, Height: 56 mm, Depth: 24.5 mm, Width with packaging: 175 mm, Height with packaging: 250 mm, Depth with packaging: 25 mm

Cover with fixed inner grille as spare part for small room fan ECA 100 P. For version with Zugkordel.Artikel: ABD ECA 100 2, material housing: plastic, colour: traffic white, similar to RAL 9016, weight: 0.08 kg, weight with packaging: 0.22 kg, width: 150 mm, height: 150 mm, depth: 35 mm, width with packaging: 175 mm, height with packaging: 175 mm, depth with packaging: 160 mm

Motion sensor as spare part for small room fans ECA 100 ipro B and ECA 100 ipro KB.Artikel: SE ECA 100 ipro B, Housing material: plastic, Colour: white, Weight: 0.01 kg, Weight with packaging: 0.05 kg, Width: 25 mm, Height: 45 mm, Depth: 17 mm, Width with packaging: 175 mm, Height with packaging: 250 mm, Depth with packaging: 25 mm

Circuit board as spare part for fan inserts ER 100 VZ, ER-AP 100 VZ and ER-APB 100 VZ. For versions with delay ##########_0__: PL ER 100 VZ, weight: 0.03 kg, weight with packaging: 0.11 kg, width: 45 mm, height: 25 mm, depth: 115 mm, width with packaging: 150 mm, height with packaging: 45 mm, depth with packaging: 210 mm

Plastic outlet connector as spare part for flush-mounted housing ER-UP/G, extraction connector ER-AS, second room extraction ER-ZR and various surface-mounted fans of the ER-AP.Artikel group: ABSK ER-UPG/ER-AP, Housing material: plastic, Colour: black, Weight: 0.05 kg, Weight with packaging: 0.15 kg, Width: 85 mm, Height: 80 mm, Depth: 85 mm, Width with packaging: 170 mm, Height with packaging: 155 mm, Depth with packaging: 170 mm