Individual ventilation systems

ER-UPD EC - Brief InformationFlush-mounted casing with fire protection shut-off device for accommodating an ER EC / ER EC 2.1 fan. Two-room connection possible on right/left/bottom.ER-UPD EC - Product DescriptionVersionSingle-room ventilationFire protection casing for accommodating an ER EC / ER EC 2.1 fan.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal outlet nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap for simple and quick cleaning.Installation possible inside the shaft in wall and ceiling.Approved for wall installation with outlet direction upwards, right or left, as well as ceiling installation.Low installation depth of the flush-mounted casing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the casing.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-46.Approval certificates available on request or on our website www.maico-ventilatoren.com.Single-room VentilationFlush-mounted casing for accommodating an ER EC & ER EC 2.1 fan.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal outlet nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap for simple and quick cleaning.Installation outside the shaft in wall and ceiling possible.Approved for outlet direction upwards, right or left.Low installation depth of the flush-mounted casing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the casing.Predefined breaking points in the casing for use of the ER-AS extraction nozzle for WC seat ventilation.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-XXApproval certificates available on request or on our website www.maico-ventilatoren.com.Two-room VentilationTwo-room connection set ER-ZR for two-room ventilation.The ER-UPD-EC casing has predefined breaking points for the additional connection nozzle on the right, left and bottom.Fan types suitable for two-room ventilation according to DIN 18017-3: ER EC & ER EC 2.1 with ER-AK NFC/-AH NFC/-AB NFC.Main room: 60 m³/hSecond room: 40 m³/h ArticleER-UPD ECVersionMetal outlet nozzle on the side with metal shut-off flap with automatic release device, without fire protection casing, two-room connection possible on right/left/bottomAir directionExhaust airInstallation locationWall / CeilingType of installationFlush-mountedMaterialPlasticColourBlackWeight0.66 kgWeight with packaging0.93 kgFire protectionYesOutlet directionSidewaysConnection diameter75 mm / 80 mmWidth225 mmHeight225 mmDepth108 mmWidth with packaging310 mmHeight with packaging240 mmDepth with packaging120 mmPackaging unit1 pieceRangeBGTIN (EAN)4012799322054Article number0093.1767

ER-UPB EC - Brief InformationFire protection flush-mounted housing with fire protection shut-off device for all fire protection systems to accommodate a fan ER EC/ ER EC 2.1ER-UPB EC - Product DescriptionVersionFire protection housing to accommodate a fan ER EC / ER EC 2.1.Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap, allowing simple and quick cleaning.Installation possible within the shaft in wall and ceiling.Approved for wall installation with exhaust direction upwards, right or left, as well as ceiling installation.Low installation depth of the flush-mounted housing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the housing.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-46.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Single Room VentilationFlush-mounted housing to accommodate a fan ER EC / ER EC2.1Installation in residential kitchens, bathrooms and WCs.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device.Metal shut-off flap also serves as a cold smoke flap.Easily removable non-return flap, allowing simple and quick cleaning.Installation possible within the fire protection shaft in wall and ceiling.Approved for exhaust direction upwards, right or left.Low installation depth of the flush-mounted housing and cover.With plaster protection cover.Practical snap fastener and electrical plug connection for quick mounting of the fan in the housing.Predefined breaking points in the housing for use of the extraction nozzle ER-AS for WC seat ventilation.Plastic parts normally flammable according to class B 2.General building authority approval, approval no.: Z-51.1-XXApproval certificates available on request or on our homepage www.maico-ventilatoren.com. ArticleER-UPB ECVersionMetal exhaust nozzle on the side with metal shut-off flap with automatic release device, with fire protection housing, no two-room connection possibleAir directionVentilationInstallation locationWall / CeilingType of installationFlush-mountedMaterialPlasticColourBlackWeight2.59 kgWeight with packaging2.9 kgFire protectionYesExhaust directionSidewaysConnection diameter75 mm / 80 mmWidth249 mmHeight249 mmDepth120 mmWidth with packaging285 mmHeight with packaging350 mmDepth with packaging140 mmPackaging unit1 pieceRangeBGTIN (EAN)4012799322061Article number0093.1768

ER-AB NFC - Brief InformationCover for ER EC fan unit, version with motion detector, intelligent timer module and NFC interfaceER-AB NFC - Product DescriptionER-AB NFC - Version with Motion Detector, Intelligent Timer Module and NFC InterfaceCover with motion detector, intelligent timer module, LED filter change indicator and NFC interface.Barrier-free product due to automatic switching on/off via integrated motion detector.All settings via intuitive, capacitive control surface, no intervention on the circuit board or handling of 230 V components necessary.Individual adjustment of the air volume (15-100 m³/h) possible.Electrical plug connection for quick, tool-free connection of the cover to the fan.Control of the full load stage via motion detector. After detected movement, the full load stage is activated without switch-on delay.Range of the motion detector: 5 m.Switching on/off of the full load stage via light switch or separate switch possible, with adjustable switch-on delay (0-120 sec).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable run-on time of the full load stage (0-30 min).Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilation of irregularly used rooms.Configuration lock prevents unwanted interventions by unauthorized users.Protocol function of the MAICO@NFC app enables time-saving documentation of configurations and device information.Acceptance & service protocols can be exported directly as PDF via the MAICO@NFC app.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, stylish design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection class IP X5 for safety in the bathroom.Traffic white colour similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting ArticleER-AB NFCVersionMotion detector with intelligent timer module and NFC parameterisationAir volume15 m³/h / 20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / steps variable in 5 m³/h increments from 15 - 100 m³/h adjustable. ER-A: Stage 1 = 30 m³/h, Stage 2 = 60 m³/h. -AB: ER-AK/ER Stage 1 and Stage 2 = variable in 5 m³/h increments from 15 - 100 m³/h. ER-AH: Stage 1 = 15-40 m³/h, Stage 2 = 60-100 m³/h each adjustable in 5 m³/h incrementsAir directionExhaustProtection classIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourTraffic white, similar to RAL 9016Weight0.59 kgWeight with packaging0.75 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging295 mmHeight with packaging305 mmDepth with packaging47 mmConveyed medium temperature at IMax40 °CSound pressure level17 dB(A) / 17 dB(A) / 18 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH; 25 dB(A) / 25 dB(A) / 28 dB(A) / 32 dB(A) / 41 dB(A) / 50 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799844624Article number0084.0462

ER-AK NFC - Brief InformationCover for ER EC fan unit, comfort version with timer module and NFC interfaceER-AK NFC - Product DescriptionER-AK NFC - Comfort Version with Intelligent Timer ModuleCover with intelligent timer module, LED filter change indicator and NFC interface.All settings via the intuitive MAICO@NFC APP, no intervention on the circuit board or handling of 230 V components.Individual adjustment of the air volume (15-100 m³/h) possible.Electrical plug connection for quick tool-free connection of the cover to the fan.Switching the full load stage on/off via light switch or separate switch possible, with adjustable switch-on delay (0/-120 sec).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable run-on time of the full load stage (0-30 min).Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilating irregularly used rooms.Configuration lock prevents unwanted changes by unauthorized users.MAICO@NFC-App protocol function enables time-saving documentation of configurations and device information.Acceptance & service protocols can be exported directly as PDF via the MAICO@NFC-App.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, attractive design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection class IP X5 for safety in the bathroom.Colour traffic white similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting ItemER-AK NFCVersionComfort with intelligent timer module and NFC parameterisationAir volume15 m³/h / 20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / steps variable in 5 m³/h increments from 15 - 100 m³/h adjustable. ER-A: Stage 1 = 30 m³/h, Stage 2 = 60 m³/h. -AB: ER-AK/ER Stage 1 and Stage 2 = variable in 5 m³/h increments from 15 - 100 m³/h. ER-AH: Stage 1 = 15-40 m³/h, Stage 2 = 60-100 m³/h each adjustable in 5 m³/h incrementsAir directionExhaustProtection classIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourtraffic white, similar to RAL 9016Weight0.59 kgWeight with packaging0.75 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging295 mmHeight with packaging305 mmDepth with packaging47 mmConveyed medium temperature at IMax40 °CSound pressure level17 dB(A) / 17 dB(A) / 18 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH; 25 dB(A) / 25 dB(A) / 28 dB(A) / 32 dB(A) / 41 dB(A) / 50 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799844600Article number0084.0460

ER-AH NFC - Brief InformationCover for ER EC fan insert, version with humidity control, intelligent timer module and NFC interfaceER-AH NFC - Product DescriptionER-AH – Version with intelligent timer module, humidity control and NFC interfaceCover with humidity control, intelligent timer module, LED filter change indicator and NFC interface.Accessible product due to automatic on/off via intelligent humidity control.All settings via the intuitive MAICO@NFC APP, no intervention on the circuit board or handling of 230 V components.Individual adjustment of the air volume (base load 15-40 m³/h, nominal load 40-100 m³/h) possible.Electrical plug connection for quick, tool-free connection of the cover to the fan.Selectable humidity control automatic or manual via MAICO@NFC.Intelligent humidity control with seasonal adjustment. Stepless adjustment of the air volume between 30 m³/h and the set nominal load V2 based on the relative room humidity. No setting of the switch-on humidity necessary. The fan independently monitors the room humidity and ventilates automatically.Selectable manual humidity control with 2 adjustable switch-on points for relative humidity, as well as the air volumes.Switching on/off of the full load stage via light switch or separate switch possible, with adjustable switch-on delay (0/-120 sec).Adjustable run-on time of the full load stage (0-30 min).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable interval control (0*/1/2/4/6/12, operating time adjustable 10-60 min) for ventilation of irregularly used rooms.Adjustable device lock (tenant protection).The digital logging function of the MAICO@NFC App enables time-saving documentation of configurations and device information.Created acceptance and service protocols can be exported directly as PDF files.Protection class II.*Factory settingSpecial FeaturesFlow-optimised, stylish design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection rating IP X5 for safety in the bathroom.Colour traffic white similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory setting

Surface-mounted housing ER GH APB with metal spigot and fire protectionFeatures:Quality in Germany, DN 75/80, protection class IP X5 for safety in the bathroomSurface-mounted housing with maintenance-free metal fire damper - for easy installation on the ceiling or wallUncomplicated one-man installation with standard tools - low-maintenance device. Self-contained metal fire damper with simultaneous function as a cold smoke barrier. Rotatable housing with the option of connecting the outlet spigot to the top left or right of the main duct. Electrical connection at the rear. Electrical wiring on practical pin terminal blockAttractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Normally flammable in accordance with DIN 4102-1 class B 2Description:Version with fire protection: Surface-mounted housing with maintenance-free fire protection metal shut-off damper against fire transmission K90-18017. Automatic fire protection metal shut-off damper with simultaneous function as cold smoke barrier. Special features: For applications in accordance with DIN 18017-3. Surface-mounted housing to accommodate the ER EC fan insert in combination with the covers from the ER-A... series. Installation in bathrooms, WCs and domestic kitchens. Wall or ceiling mounting possible. Housing can be swivelled, allowing connection of the outlet spigot to the top left or top right of the main duct. Electrical connection at the rear. Simple electrical wiring on practical pin header terminal. Connection diameter DN 75/80. Plastic parts normally flammable to DIN 4102-1 class B 2 (to EN 13501-1). Colour traffic white similar to RAL 9016. Simple Montage.Artikel: ER GH APB, Version: with fire protection, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, Housing material: ABS plastic, Colour: traffic white, similar to RAL 9016, Weight: 0.866 kg, Weight with packaging: 1.058 kg, Fire protection: yes, Air outlet direction: rear, Connection diameter: 75 mm / 80 mm, Width: 276 mm, Height: 276 mm, Depth: 180 mm, Width with packaging: 350 mm, Height with packaging: 140 mm, Depth with packaging: 290 mm

ER 100 - Brief InformationFan unit with cover and filter for installation in flush-mounted housing, air volume 101 m³/hER 100 - Product DescriptionStandard VersionER 100: Speed controllable.ER 60: Not speed controllable.FeaturesFan with cover and ISO Coarse 30 % (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double-sided sealed ball bearings.Volume flow characteristic and leakage rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER 100VersionStandard versionAir volume101 m³/hSpeed1,900 1/minAir directionExhaust airSpeed controllable✔SEC average-6.66 kWh/(m²*a)Type of voltageAlternating currentRated voltage230 VMains frequency50 HzPower consumption29 WIMax0.14 AProtection classIP X5Power cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.47 kgWeight with packaging1.75 kgFilter classISO Coarse 30 % (G2)Discharge directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmMedium temperature at IMax40 °CSound pressure level45 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Fan insert ER EC 2.1 for flush-mounted housing ER GH and surface-mounted housing ER GHFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom, installation in protection zone 1 possible For a better indoor climate in the bathroom or WC, The low-noise exhaust air fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Two-stage motor with automatic thermal overload protection. Switch-on delay and run-on time. Can be used for flush and surface mounting. Discharge adapter for side and rear discharge included as standard. Attractive design with elegant front panel made of impact-resistant plastic - Compatible with any bathroom furnishing style Housing made of impact-resistant plasticThermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Special features: Robust, constant-volume, energy-saving and sound-optimised EC motor. Lowest power consumption. Can be used for flush-mounted and surface-mounted applications. Ventilation solution in accordance with DIN 18017-3 (single-pipe ventilation). DIBt approval applied for. Protection class IP X5, installation in protection zone 1 possible. The ER EC fan insert can be combined with the four existing covers ER-A, ER-AK, ER-AH, ER-AB and adapted to the application situation. Can be used in conjunction with the ER-RPK replacement kit in existing ER housings (ER-UP/G, ER-UPB, ER-UPD) for refurbishments. 2-stage fan for installation in flush-mounted housing ER GH and surface-mounted housing ER GH AP/ER GH APB. Delivery volume 30 m3/h / 60 m3/h in conjunction with the standard cover ER-A. When using the covers (ER-AK, ER-AH, ER-AB), 20 / 30 / 40 / 60 / 100 m3/h also possible. Switch-on delay 60 s. Run-on time 15 min. For single or double room ventilation with a single fan. Accessories for two-room ventilation ER-ZR. Toolless mountable discharge adapter for side and rear discharge included as standard. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The steep characteristic curve shows the high pressure capacity of the ER EC fan. Robust, energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, closed on both sides ##########_1__: ER EC, delivery volume: 20 m3/h / 30 m3/h / 40 m3/h / 60 m3/h / 100 m3/h / Stages variably adjustable depending on cover variant. ER-A: Stage 1 = 30 m3/h, stage 2 = 60 m3/h. ER-AK/ER-AB: Stage 1 and stage 2 = 20/30/40/60/100 m3/h adjustable. ER-AH: Stage 1 = 20/30/40 m3/h, stage 2 = 60/100 m3/h adjustable. Speed: 500 1/min / 800 1/min / 1050 1/min / 1250 1/min / 1800 1/min / combined with ER GH, ER GH AP/APB, Air direction: Ventilation, Speed controllable: no, Reversible: no, Voltage type: AC, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 2 W / 2.5 W / 3 W / 5 W / 17 W / combined with ER GH, 2.4 W / 2.9 W / 3.6 W / 6.2 W / 17 W combined with ER GH AP/APB, Protection rating: IP X5, Mains cable: 4 / 1.5 mm2, Installation location: wall / ceiling, Installation type: flush-mounted, System type: decentralised, Housing material: polypropylene (PP), Colour: black, Weight: 0.64 kg, Weight with packaging: 0.906 kg, Filter class: ISO Coarse 30 % (G2), Discharge direction: side / rear, Width: 213 mm, Height: 233 mm, Depth: 115 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 152 mm, Fluid temperature at IMax: 40 °C, sound pressure level: 15 dB(A) / 16 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH, 27 dB(A) / 31 dB(A) / 35 dB(A) / 41 dB(A) / 51 dB(A) combined with ER GH AP/APB/ Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm

Flush-mounted housing ER-UPB/U for ER, fire protection, two-room connection at the bottomFeatures:Quality made in Germany, with maintenance-free fire protection device against fire transmission for safety in the bathroomFlush-mounted housing with two-room connection and fire protection – for easy installation on the ceiling or wallSimple one-person installation with standard tools. Single-room and two-room ventilation possible. Exhaust direction upwards, left and right, as well as ceiling installation. With plaster protection cover. With maintenance-free fire protection shut-off device. Fire protection device for accommodating a fan ER 60 / ER 100. Easily removable non-return flap for simple and quick cleaning. An integrated two-room connection set is available for two-room connections. Two-room connection at the bottom.Attractive design with elegant front panel made of impact-resistant plastic – neutral black, compatible with any bathroom furnishing style, housing made of impact-resistant plasticSuitable for continuous operation. Fire protection is provided.Description:Single-room ventilation: Fire protection housing for accommodating a fan ER 60, ER 100. Installation in apartment kitchens, bathrooms and WCs. With maintenance-free fire protection shut-off device against fire transmission K90-18017. Metal exhaust nozzle DN 75/80 with metal shut-off flap and automatic release device. Metal shut-off flap also serves as a cold smoke flap. Easily removable non-return flap, allowing simple and quick cleaning. Installation possible within the shaft in wall and ceiling. Approved for wall installation with exhaust direction upwards, right or left, as well as ceiling installation. Low installation depth of the flush-mounted housing and cover. With plaster protection cover. Practical snap fastener and electrical plug connection for quick installation of the fan in the housing. Plastic parts normally flammable according to class B 2. General building authority approval, approval no.: Z-51.1-46. Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Article: ER - UPB/U, version: metal exhaust nozzle on the side with metal shut-off flap with automatic release device, with fire protection housing, two-room connection at the bottom, air direction: exhaust, installation location: wall / ceiling, installation type: flush-mounted, material: plastic, colour: black, weight: 2.52 kg, weight with packaging: 3.005 kg, fire protection: yes, shut-off device: integrated, exhaust direction: sideways, connection diameter: 75 mm / 80 mm, width: 249 mm, height: 249 mm, depth: 120 mm, width with packaging: 415 mm, height with packaging: 280 mm, depth with packaging: 130 mm, approval number: Z-51.1-46

ER 100 GVZ - Brief InformationFan unit with cover and filter for installation in flush-mounted housings, air volume 101 m³/h, with base load control and delay timer switchER 100 GVZ - Product DescriptionVersion with Base Load Control and Delay Timer SwitchThe device runs continuously at 35 m³/h.Switching on/off the full load stage via light switch or separate switch possible.Switching to full load with an activation delay of approx. 50 seconds.Run-on time of full load approx. 6 minutes.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).Not speed controllable.FeaturesFan with cover and ISO Coarse 30% (G2) filter for installation in flush-mounted housings ER-UP/G, ER-UPD and ER-UPB....For single-room or two-room ventilation with a single fan (exception: version H).Easy filter replacement without tools.Cover rotatable by ± 5°, allowing compensation for misaligned housing installation.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Traffic white colour similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve demonstrates the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.Installation / Operation / Maintenance Circuit diagramsInstallation instructions: pdf | online ArticleER 100 GVZVersionBase load and delay timer controlAir volume35 m³/h / 101 m³/hSpeed850 rpm / 1,900 rpmAir directionExhaust airSpeed controllable−SEC average-6.5 kWh/(m²*a)Voltage typeAlternating currentRated voltage230 VMains frequency50 HzPower consumption9 W / 29.5 WIMax0.09 A / 0.14 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeFlush-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.49 kgWeight with packaging1.77 kgFilter classISO Coarse 30% (G2)Blow-out directionSidewaysWidth250 mmHeight250 mmDepth150 mmWidth with packaging280 mmHeight with packaging280 mmDepth with packaging155 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level26 dB(A) / 45 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Exhaust air element, surface-mounted Centro-M-APB manual, for central ventilationFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroomFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Fixed exhaust air telemet. Fixed exhaust air element. Can be installed in all DIN VDE 0100-701 elements. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold stops or silencers required. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main line.Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Exhaust air element Centro-M-APB - Manual version: For jointly variable volume flow. Fixed exhaust air element. MAICO Centro-M-APB extract air elements have no electrical connection and can be installed in all areas in accordance with DIN VDE 0100-701. Exhaust air element with ISO Coarse > 30 % (G2) filter in surface-mounted design for domestic kitchens, bathrooms and WCs. Can be used with Centro central ventilation system. Minimum volume flow 30 m3/h. Fire protection identical to MAICO ER individual room ventilation. Cold smoke barriers as standard. No additional telephony silencers required. With maintenance-free fire protection shut-off device to prevent fire transmission K90-18017. Housing can be rotated, allowing connection of the outlet connection to the top left or top right of the main duct. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Metal outlet connection DN 75/80 with automatic metal non-return flap. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-M-APB, Version: manual, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Type of protection: IP X5, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 1.375 kg, Weight with packaging: 1.935 kg, Filter class: ISO Coarse > 30 % (G2), Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Fan insert ER 60 I 62 m3/h, interval control, delayFeatures:Quality in Germany, protection class IP X5 for safety in the bathroom and can also be used with water jets, protection class IIFan insert with cover and filter for installation in flush-mounted housing - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as automatic switch-on / switch-off via (switchable) interval control. Fan can be operated manually using an additional switch. Adjustable time interval from 1 to approx. 15 h. Uncomplicated one-man installation with standard tools - low-maintenance device. Cover and G2 filter. Electrical plug connection for quick installation of the fan in the housing. Easy filter change without tools. Cover can be rotated up to +/- 5° if the housing is installed at an angle. Easy-to-install snap-on fastening of the fan to the housing. Not speed controllable. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sides Description:Version with interval control: The interval control ensures that only irregularly used rooms are ventilated. Time interval adjustable from 1 to approx. 15 h. Operating time per interval approx. 10 min. With manual operation (z.B. via light switch), a switch-on delay of approx. 50 sec. and a run-on time of approx. 10 min. applies. Interval control can be switched off. Not speed controllable. Fan with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. For single-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER 60 I, Version: Interval control, Delivery volume: 62 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.43 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.16 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Decentralised, Material: Plastic, Colour: traffic white, similar to RAL 9016, Weight: 1.52 kg, Weight with packaging: 1.8 kg, Filter class: ISO Coarse > 30 % (G2), Discharge direction: sideways, Width: 250 mm, Height: 250 mm, Depth: 150 mm, Width with packaging: 280 mm, Height with packaging: 280 mm, Depth with packaging: 155 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 10 min / Run-on time when using an optional switch (z.B. Light switch) available, Switch-on delay: 50 s / Switch-on delay when using an optional switch (z.B. Light switch) available, Sound pressure level: 36 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption surface AL = 10 m2, Nominal width: 75 mm / 80 mm

ER-APB 60 - Brief InformationSurface-mounted fan with fire protection metal shut-off damper for ventilation, air volume 61 m³/hER-APB 60 - Product DescriptionStandard VersionER 100: Speed controllable.ER 60: Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilation of residential kitchens, bathrooms or WCs.Metal outlet nozzle DN 75/80 with maintenance-free metal shut-off damper and automatic release device against fire transmission K90-18017.Metal shut-off damper also serves as a cold smoke damper.Housing rotatable, allowing connection of the outlet nozzle top left or top right to the main duct.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-38.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Wiring diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-APB 60VersionStandard versionAir volume61 m³/hSpeed1,250 rpmAir directionVentilationSpeed controllable−SEC average-3.87 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption21 WIMax0.17 AProtection classIP X5Mains cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typedecentralisedMaterialPlasticColourtraffic white, similar to RAL 9016Weight2.12 kgWeight with packaging2.68 kgFilter classISO Coarse 30 % (G2)Fire protectionyesShut-off deviceintegrated metal shut-off damper with release deviceConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging335 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CSound pressure level43 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Centro-H extract air element, humidity-controlledFeatures:Made in Germany quality, super quiet, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise exhaust air element - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as automatic switch-on / switch-off by humidity control. Switch-on point can be set via jumper. Manual operation via switch possible. Run-on time at full load. Uncomplicated one-man installation with standard tools - low-maintenance device. Can be installed in all DIN VDE 0100-701 elements. Can also be installed in water jets. With G2 filter for installation in surface-mounted housing. Easy filter change without tools. No cold barriers or silencers required. Rotatable cover up to +/- 5° possible if the housing is installed at an angle. Easy-to-install snap-on fastening of the exhaust air element in the housing. Pressure control required for central fan. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Fire protection identical to MAICO-ER single room ventilation.Description:Centro-H exhaust air element - version with automatic humidity control: Exhaust air element with electrothermal actuator. For basic and demand ventilation. Pressure control required for central fan. Electrical plug-in connection for quick installation of the exhaust air element in the housing. MAICO Centro-H exhaust air elements comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. Protection class II. Barrier-free product, as it switches on/off automatically. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Valve monitors the room humidity independently and automatically switches to ventilation on demand. Manual operation possible via a switch, e.g. switching on the ventilation on demand using a light switch. Standard switching: Exhaust air element closed Operation in basic ventilation, humidity control is active when the switch-on point is exceeded - operation in demand ventilation, when the switch-off point is undershot - operation in basic ventilation. Other switching variants: manual activation of demand ventilation. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. Exhaust air element with cover and ISO Coarse > 30 % (G2) filter for installation in flush-mounted housing. Can be used with Centro central ventilation system. Fire protection identical to MAICO ER individual room ventilation. No additional cold smoke barriers required. No additional silencers required. Colour traffic white, similar to RAL 9016. Easy filter change without tools. Cover can be rotated by +- 5°, allowing equalisation if the housing is installed at an angle. Quick and easy installation of the exhaust air element in the housing using the snap-on fastening. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel.Artikel: Centro-H, Version: electric, Delivery volume: 30 m3/h / 65 m3/h, Minimum delivery volume: 30 m3/h, Air direction: Ventilation, Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz / 60 Hz, Power consumption: 3.5 W, IMax: 0.9 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: Central, Material: Plastic, Colour: Traffic white, similar to RAL 9016, Weight: 0.86 kg, Weight with packaging: 1.13 kg, Filter class: ISO Coarse > 30 % (G2), Width: 251 mm, Height: 251 mm, Depth: 138 mm, Width with packaging: 285 mm, Height with packaging: 285 mm, Depth with packaging: 155 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min - Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 26 dB(A) / 33 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Nominal width: 75 mm / 80 mm

ER-APB 100 VZ - Brief InformationSurface-mounted fan with fire protection metal shut-off damper for ventilation, air volume 100 m³/h, with delay timer switchER-APB 100 VZ - Product DescriptionVersion with Delay Timer SwitchSwitch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilation of residential kitchens, bathrooms or WCs.Metal outlet nozzle DN 75/80 with maintenance-free metal shut-off damper and automatic release device against fire transmission K90-18017.Metal shut-off damper also serves as a cold smoke damper.Housing rotatable, allowing connection of the outlet nozzle top left or top right to the main duct.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-38.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Wiring diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-APB 100 VZVersionDelay timer switchAir volume100 m³/hSpeed1,850 rpmAirflow directionExhaust ventilationSpeed controllable−SEC average-6.28 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption29 WIMax0.15 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight2.09 kgWeight with packaging2.65 kgFilter classISO Coarse 30 % (G2)Fire protectionYesShut-off deviceIntegrated metal shut-off damper with release deviceConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging335 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level49 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Surface-mounted fan ER-APB 60 VZ 61 m3/h, fire protection, delay timeFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Delay timer with switch-on delay and run-on time. With fire protection metal shut-off damper to prevent fire transmission. Not speed-controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connector to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with delay timer: Switch-on delay approx. 50 sec. Run-on time approx. 6 min. Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 VZ, Version: Delay timer, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -3.62 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.13 kg, Weight with packaging: 2.69 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release device, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 43 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 100 G 100 m3/h, fire protection, base loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. Device runs in continuous operation. Switching to full load possible. On/off of base load possible with additional switch. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Not speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with base load switching: The appliance runs in continuous operation at 35 m3/h. The full load level can be switched on/off using a light switch or separate switch. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100 G, Version: Base load circuit, Delivery volume: 35 m3/h / 100 m3/h, Speed: 900 1/min / 1850 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -6.47 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 28.5 W, IMax: 0.09 A / 0.15 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.09 kg, Weight with packaging: 2.65 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 33 dB(A) / 49 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

ER-APB 60 G - Short InformationSurface-mounted fan with fire protection metal shut-off damper for ventilation, air volume 61 m³/h, with base load controlER-APB 60 G - Product DescriptionVersion with Base Load ControlThe device runs continuously at 35 m³/h.Switching on/off of the full load stage is possible via light switch or separate switch.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilation of residential kitchens, bathrooms or WCs.Metal outlet nozzle DN 75/80 with maintenance-free metal shut-off damper and automatic release device against fire transmission K90-18017.Metal shut-off damper also serves as a cold smoke damper.Housing rotatable, allowing connection of the outlet nozzle top left or top right to the main duct.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-38.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Circuit diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-APB 60 GVersionBase load controlAir volume35 m³/h / 61 m³/hSpeed900 rpm / 1,250 rpmAir directionExhaust airSpeed controllable−SEC average-3.62 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption11 W / 21 WIMax0.13 A / 0.17 AProtection classIP X5Power cable5 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight2.14 kgWeight with packaging2.7 kgFilter classISO Coarse 30 % (G2)Fire protectionYesShut-off deviceIntegrated metal shut-off damper with release deviceConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging335 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CSound pressure level33 dB(A) / 43 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

ER-APB 100 F - Brief InformationSurface-mounted fan with fire protection metal shut-off damper for ventilation, air volume 100 m³/h, with light controlER-APB 100 F - Product DescriptionVersion with Light ControlBarrier-free product, as automatic switching on/off via light control is possible.The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on.Switch-on brightness (on the device) min. 30 lux.Switch-off brightness (on the device) max. 0.3 lux.No need to install a switch.Switch-on delay approx. 50 seconds.Run-on time approx. 6 minutes.Circuit variant: With an additional switch, the fan can be switched off independently of the room lighting (see circuit diagrams on the internet).Not speed controllable.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilation of residential kitchens, bathrooms or WCs.Metal outlet nozzle DN 75/80 with maintenance-free metal shut-off damper and automatic release device against fire transmission K90-18017.Metal shut-off damper also serves as a cold smoke damper.Housing rotatable, allowing connection of the outlet nozzle top left or top right to the main duct.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-38.Approval certificates available on request or on our homepage www.maico-ventilatoren.comInstallation / Operation / Maintenance Circuit diagramsAdditional manual: pdf | onlineInstallation manual: pdf | online ArticleER-APB 100 FVersionLight controlAir volume100 m³/hSpeed1,850 1/minAir directionExhaust airSpeed controllable−SEC average-21.24 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption29 WIMax0.15 AProtection classIP X5Power supply cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight2.1 kgWeight with packaging2.66 kgFilter classISO Coarse 30 % (G2)Fire protectionYesShut-off deviceIntegrated metal shut-off damper with release deviceConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging335 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CRun-on time6 minSwitch-on delay50 sSound pressure level49 dB(A) / Specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2

Surface-mounted fan ER-APB 60 F 61 m3/h, fire protection, light controlFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via light control. Switch-on delay and run-on time. The device can be switched off independently of the room lighting using an additional switch. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Cannot be speed-controlled. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with light control: Barrier-free product, as automatic switching on/off is possible via the light control. The light control switches the fan on from a minimum brightness in the room, e.g. when a lamp is switched on. Switch-on brightness (on the device) min. 30 lux. Switch-off brightness (on the device) max. 0.3 lux. No need to install a switch. Switch-on delay approx. 50 sec. Switching variant: With an additional switch, the fan can be switched off independently of the room lighting (see wiring diagrams on the Internet). Not speed-controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016 All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 F, Version: Light control, Delivery volume: 61 m3/h, Speed: 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -19.51 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 21 W, IMax: 0.17 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.13 kg, Weight with packaging: 2.69 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release device, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Fluid temperature at IMax: 40 °C, Run-on time: 6 min, Switch-on delay: 50 s, Sound pressure level: 43 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal diameter: 75 mm / 80 mm

Surface-mounted fan ER-APB 100 100 m3/h, fire protection, standardFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against moisture, unpleasant odours and mouldUncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. With fire protection metal shut-off damper to prevent fire transmission. Speed controllable. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main duct. Electrical plug-in connection for quick installation of the fan on the housing. Can also be installed in water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Standard version: ER 100: Speed controllable. ER 60: Not speed controllable. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 100, Version: Standard version, Delivery volume: 100 m3/h, Speed: 1850 1/min, Air direction: Ventilation, Speed controllable: yes, SEC average: -6.47 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 28.5 W, IMax: 0.15 A, Protection rating: IP X5, Mains cable: 3 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.08 kg, Weight with packaging: 2.64 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, depth with packaging: 255 mm, fluid temperature at IMax: 40 °C, sound pressure level: 49 dB(A) / specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal diameter: 75 mm / 80 mm

ER EC RF17 - Brief InformationFan insert ER EC RF17 for flush-mounted housings UP-/UPD-/UPB 17, air volume 30 m³/h / 60 m³/hER EC RF17 - Product DescriptionSpecial FeaturesFan insert kit for use in ER 17 flush-mounted housings.Replacement of old ER 17 fan inserts with energy-saving ER EC RF17.Reduced power consumption by up to 90% compared to ER 17.Improved sound power level compared to ER 17.Contemporary design with new covers ER-A/ER-AK/ER-AH/ER-AB.Extended control options through combination with ER-A/ER-AK/ER-AH/ER-AB covers.No extensive replacement work necessary.Features2-stage fan for installation in flush-mounted housings UP-/UPD-/UPB 17.Air volume 30 m³/h / 60 m³/h in combination with the standard cover ER-A.When using covers (ER-AK, ER-AH, ER-AB), also 20 / 30 / 40 / 60 / 100 m³/h possible.Switch-on delay 60 s and run-on time 15 min in combination with the standard cover ER-A.When using covers (ER-AK, ER-AH, ER-AB), also switch-on delay 0/30/60/90/120 s and run-on time 0/3/6/15/24/30 min possible.For single-room ventilation with a single fan.Adapter board with 5 terminals for quick mounting of the fan in the housing.Included mounting accessories for installation of the fan insert in the ER 17 housing.ER EC RF17 corresponds to protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The steep characteristic curve shows the high pressure capability of the ER EC RF17 fan.Robust energy-saving EC motor.Motor with thermal overload protection.Maintenance-free, with double-sealed ball bearings.Installation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER EC RF17Air volume20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / Depending on cover variant, stages can be variably adjusted. ER-A: Stage 1 = 30 m³/h, Stage 2 = 60 m³/h. ER-AK/ER-AB: Stage 1 and Stage 2 = 20/30/40/60/100 m³/h adjustable. ER-AH: Stage 1 = 20/30/40 m³/h, Stage 2 = 60/100 m³/h adjustable.Speed500 rpm / 800 rpm / 1,050 rpm / 1,250 rpm / 1,800 rpmAirflow directionExhaustSpeed controllable−Reversibility−Type of voltageAlternating currentRated voltage230 VMains frequency50 HzPower consumption2 W / 2.5 W / 3 W / 5 W / 17 WProtection classIP X5Power cable3/5 x 1.5 mm²Installation locationWall / CeilingType of installationFlush-mountedSystem typeDecentralisedHousing materialPolypropylene (PP)ColourBlackWeight0.76 kgWeight with packaging1.05 kgFilter classISO Coarse 30 % (G2)Exhaust directionSidewaysWidth225 mmHeight87 mmDepth215 mmWidth with packaging280 mmHeight with packaging155 mmDepth with packaging280 mmTransport medium temperature at IMax40 °CSound pressure level26 dB(A) / 36 dB(A)

Centro-H-APB - Brief InformationElectrically operated humidity-controlled surface-mounted exhaust element fire protection metal shut-off damper for the Centro-ER system for central ventilation.Centro-H-APB - Product DescriptionExhaust Element Centro-H-APB - Version with Automatic Humidity ControlExhaust element with electrothermal actuator.For basic and demand ventilation.Pressure control required for central fan.Electrical plug connection for quick installation of the exhaust element in the housing.MAICO Centro-H-APB exhaust elements comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water.Protection class II.Barrier-free product due to automatic switching on/off.Fully automatic intelligent humidity control.No setting of the switch-on humidity required. The valve independently monitors the room air humidity and automatically switches to demand ventilation.Manual operation via a switch possible, e.g. switching on demand ventilation via light switch.Standard circuit: Exhaust element closed - operation in basic ventilation, humidity control is active when the switch-on point is exceeded - operation in demand ventilation, when the switch-off point is undershot – operation in basic ventilation.Other circuit variants: manual activation of demand ventilation.Full load switching on by the light switch and associated fan overrun control (overrun time 15 min).FeaturesExhaust element with ISO Coarse 30% (G2) filter in surface-mounted design for residential kitchens, bathrooms and toilets.Usable with central ventilation system Centro.Minimum volume flow 30 m³/h.Fire protection identical to MAICO ER single-room ventilation.Cold smoke barriers standard.No additional telephony silencers necessary.With maintenance-free fire protection shut-off device against fire transmission K90-18017.Rotatable housing, allowing connection of the outlet nozzle top left or top right to the main duct.Traffic white colour, similar to RAL 9016.Easy filter replacement without tools.Metal outlet nozzle DN 75/80 with automatic metal non-return flap.Shaft pressure difference according to DIN 52210-6, tested by IAB Oberursel.Installation / Operation / Maintenance Additional manual: pdf | onlineInstallation manual: pdf | onlineSupplement humidity controlAdditional manual ArticleCentro-H-APBVersionelectricalVolume flow20 m³/h / 60 m³/hMinimum volume flow30 m³/hAir directionExhaustType of voltageAlternating currentRated voltage230 VMains frequency50 Hz / 60 HzPower consumption3.5 WIMax0.9 AProtection classIP X5Power supply cable3 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeCentralMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.49 kgWeight with packaging2.03 kgFilter classISO Coarse 30% (G2)Width236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging340 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °COverrun time6 min / Overrun time available when using an optional switch (e.g. light switch)Sound pressure level26 dB(A) / 33 dB(A) / Specification according to DIN 18017-3 at an equivalent absorption area AL = 10 m2Packaging unit1 pieceRangeBGTIN (EAN)4012799841883Article number0084.0188

Surface-mounted fan ER-APB 60 H 61 m3/h, fire protection, basic humidity loadFeatures:Made in Germany quality, super quiet, fan connection DN 75/80, protection class IP X5 for safety in the bathroom, protection class IIFor a better indoor climate in the bathroom or WC, The low-noise surface-mounted fan - the elegant solution against humidity, unpleasant odours and mouldBarrier-free product, as it switches on/off automatically via humidity control. Relative humidity can be set with a jumper for switch-on point. Switch-off point is fixed value. Manual switch-on at full load possible and with run-on time. Uncomplicated one-man installation with standard tools - low-maintenance device. With G2 filter for ventilation. Easy filter change without tools. Housing can be rotated, allowing the outlet connection to be connected to the top left or right of the main pipe. Electrical plug-in connection for quick and easy installation. Not speed controllable. Not suitable for second room ventilation. Can also be installed in the event of water jets. Attractive design with elegant front panel made of impact-resistant plastic - Neutral white colour similar to RAL 9016, compatible with any bathroom furnishing style Housing made of impact-resistant plasticSuitable for continuous operation. Thermal overload protection. Energy-saving, robust motor with sealed ball bearings on both sidesDescription:Version with humidity control and base load switching: Barrier-free product, as automatic switching on/off via humidity control is possible. Fully automatic intelligent humidity control. No need to set the switch-on humidity. Fan monitors the room air humidity independently and vents automatically. Not speed controllable. Not suitable for second room ventilation. Manual operation possible via a switch, e.g. switching on the full load using a light switch. Standard switching: Fan runs in base load operation, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Further switching variants: Fan operation with or without base load operation, manual activation of full load, switching the fan on or off using a switch. Switching on the full load via the light switch and associated run-on control (run-on time 15 min) of the fan. The fan runs until the humidity in the room has fallen below the switch-off humidity. After 60 minutes at the latest, the run-on time is activated and the fan is then switched off. Surface-mounted fan with ISO Coarse > 30 % (G2) filter for ventilating domestic kitchens, bathrooms or WCs. Metal exhaust spigot DN 75/80 with maintenance-free metal shut-off damper and automatic triggering device to prevent fire transmission K90-18017. Metal shut-off damper also serves as a cold smoke damper. Housing can be swivelled, allowing the outlet connection to be connected to the top left or top right of the main duct. Easy filter change without tools. Quick and easy installation of the fan in the housing using the snap-on fastening and the electrical plug connection. Colour traffic white similar to RAL 9016 All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 in accordance with DIN VDE 0100-701, even in the event of water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with sealed ball bearings on both sides. Volume flow characteristic curve and air leakage rate tested by TÜV Bayern e.V. Air leakage volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE-Zeichen.Artikel: ER-APB 60 H, Version: Humidity control, Delivery volume: 35 m3/h / 61 m3/h, Speed: 900 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -20.23 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, Protection rating: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: wall / ceiling, Installation type: surface-mounted, System type: decentralised, Material: plastic, Colour: traffic white, similar to RAL 9016, Weight: 2.17 kg, Weight with packaging: 2.73 kg, Filter class: ISO Coarse > 30 % (G2), Fire protection: yes, Shut-off device: integrated metal shut-off damper with release mechanism, Connection diameter: 75 mm / 80 mm, Width: 236 mm, Height: 236 mm, Depth: 217.5 mm, Width with packaging: 255 mm, Height with packaging: 335 mm, Depth with packaging: 255 mm, Conveying medium temperature at IMax: 40 °C, Run-on time: 6 min / Run-on time when using an optional switch (z.B. Light switch) available, Sound pressure level: 33 dB(A) / 43 dB(A) / Specification in accordance with DIN 18017-3 with an equivalent absorption area AL = 10 m2, Approval number: Z-51.1-45, Nominal width: 75 mm / 80 mm

ER-AP 100 H - Brief InformationSurface-mounted fan for ventilation, air volume 100 m³/h, with humidity control and base load switchingER-AP 100 H - Product DescriptionVersion with Humidity Control and Base Load SwitchingBarrier-free product, as automatic switching on/off via humidity control is possible.Fully automatic intelligent humidity control.No setting of the switch-on humidity required. The fan independently monitors the room humidity and ventilates automatically.Not speed controllable.Not suitable for two-room ventilation.Manual operation via a switch possible, e.g. switching on full load via light switch.Standard circuit: Fan runs in base load mode, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot.Other circuit variants: Fan operation with or without base load; manual activation of full load; switching the fan on or off via a switch.Switching on full load via the light switch and associated run-on control (run-on time 15 min) of the fan.The fan runs until the air humidity in the room falls below the switch-off humidity. After a maximum of 60 min, the run-on time is activated and the fan is then switched off.FeaturesSurface-mounted fan with ISO Coarse 30 % (G2) filter for ventilation of residential kitchens, bathrooms or WCs.Plastic outlet nozzle DN 75/80 with automatic plastic non-return flap.Plastic non-return flap also serves as a cold smoke flap.Housing rotatable, allowing connection of the outlet nozzle top left or top right to the main duct.Easy filter replacement without tools.Simple and quick mounting of the fan in the housing via snap fastener and electrical plug connection.Colour traffic white similar to RAL 9016.All MAICO ER devices comply with protection class IP X5 and can therefore be installed in zone 1 according to DIN VDE 0100-701, even with jet water. See planning notes for details.Protection class II.The extremely steep characteristic curve shows the high pressure capability of the ER fans.Robust energy-saving capacitor motor.Motor with thermal overload protection.Maintenance-free, with double sealed ball bearings.Volume flow characteristic and leakage air rate tested by TÜV Bayern e.V. Leakage air volume flow < 0.01 m³/h.Shaft level difference according to DIN 52210-6, tested by IAB Oberursel.With VDE mark.General building authority approval, approval no.: Z-51.1-42.Approval certificates available on request or on our homepage www.maico-ventilatoren.com.Installation / Operation / Maintenance Wiring diagramsAdditional manual: pdf | onlineInstallation manual: pdf | onlineSupplement humidity control ArticleER-AP 100 HVersionHumidity controlAir volume35 m³/h / 100 m³/hSpeed900 1/min / 1,850 1/minAir directionExhaust airSpeed controllable−SEC average-21.88 kWh/(m²*a)Rated voltage230 VMains frequency50 HzPower consumption10 W / 29 WIMax0.09 A / 0.15 AProtection classIP X5Mains cable3/5 x 1.5 mm²Installation locationWall / CeilingInstallation typeSurface-mountedSystem typeDecentralisedMaterialPlasticColourTraffic white, similar to RAL 9016Weight1.92 kgWeight with packaging2.48 kgFilter classISO Coarse 30 % (G2)Fire protectionNoConnection diameter75 mm / 80 mmWidth236 mmHeight236 mmDepth217.5 mmWidth with packaging255 mmHeight with packaging280 mmDepth with packaging255 mmConveyed medium temperature at IMax40 °CRun-on time6 minRun-on time/ Run-on time available when using an optional switch (e.g. light switch)Sound pressure level33 dB(A) / 49 dB(A) / Specification according to DIN 18017-3 at an equivalent absorption area AL = 10 m2Approval numberZ-51.1-42Packaging unit1 pieceRangeBGTIN (EAN)4012799841746Article number0084.0174

Flush-mounted housing ER GH-VWR for ER ECFeatures:Made in Germany quality, connection diameter DN 75/80, outlet spigot can be converted from side to rear without tools, extension frame and 6 mounting grooves on the side enable electrical connection from the side or rear Surface-mounted housing with convertible plastic spigot - for easy installation on the ceiling or wallUncomplicated one-man installation with standard tools. Simple electrical wiring on practical pin header terminals. Second connection for WC seat ventilation possible. Independent plastic non-return flap with simultaneous function as a cold smoke barrier. Front extension frame. Flexible cable entry. Attractive design with elegant front panel made of impact-resistant plastic - Neutral black colour, compatible with any bathroom furnishing style, housing made of impact-resistant plastic / metalSuitable for continuous operationDescription:Version for pre-wall register installation: With 40 mm deep extension frame. Outlet connection can be converted from side to rear without tools. Lateral mounting grooves for mounting with mounting brackets or in pre-wall installations. Automatic plastic non-return damper with simultaneous function as a cold smoke barrier. For applications in accordance with DIN 18017-3. Special features: Version for pre-wall register construction. With 40 mm deep extension frame. Outlet spigot can be converted from side to rear without tools. Lateral mounting grooves for mounting with mounting brackets or in pre-wall installations. Automatic plastic non-return damper with simultaneous function as a cold smoke barrier. For applications in accordance with DIN 18017-3. Single-room ventilation: Installation in bathrooms, WCs and domestic kitchens. For use in pre-wall register construction with a 40 mm extension frame. 6 mounting grooves on the side allow easy installation. Circumferential frame enables additional fixing options. Flexible cable entry enables electrical connection from the side or rear. Simple electrical wiring on practical pin header terminal. With plaster protection cover for closing the housing during the shell construction phase. Tool-free, convertible plastic discharge spigot with automatic plastic non-return flap for side (top, left, right) and rear discharge direction. Connection diameter DN 75/80. Predetermined breaking point for second room connection or WC connection spigot available as standard in the ER GH-VWR housing. Approval certificates on request or on our homepage www.maico-ventilatoren.com. Plastic parts normally flammable according to DIN 4102-1 class B 2 (according to EN 13501-1). Optional accessories: ER-AS extraction connection for WC seat ventilation, ER-ZR second room connection, ER-MS mounting set, ER-UPM mounting bracket: ER GH-VWR, Air direction: Ventilation, Installation location: Wall / ceiling, Material: Plastic / metal, Colour: Black / galvanised, Weight: 0.865 kg, Weight with packaging: 1.185 kg, Air discharge direction: Side / rear, Connection diameter: 75 mm / 80 mm, Width: 280 mm, Height: 133 mm, Depth: 343 mm, Width with packaging: 320 mm, Height with packaging: 190 mm, Depth with packaging: 420 mm

ER-AB - Brief InformationCover for ER EC fan unit, version with motion detector and intelligent time moduleER-AB - Product DescriptionER-AB - Version with Motion Detector and Intelligent Time ModuleCover with motion detector, intelligent time module and LED filter change indicator.Barrier-free product due to automatic switching on/off via integrated motion detector.All settings via intuitive, capacitive control surface, no intervention on the circuit board or handling of 230 V components necessary.Individual setting of the air volume (20/30/40/60/100 m³/h) possible.Electrical plug connection for quick, tool-free connection of the cover to the fan.Control of the full load stage via motion detector. After detected movement, the full load stage is activated without switch-on delay.Range of the motion detector: 5 m.Switching on/off of the full load stage via light switch or separate switch possible, with adjustable switch-on delay (0/30/60*/90/120 sec).In manual operation (e.g. via light switch), the set switch-on delay and run-on time apply.Adjustable run-on time of the full load stage (0/3/6/15*/24/30 min).Adjustable key lock (tenant protection).Protection class II.*Factory settingSpecial FeaturesFlow-optimised, stylish design.Tool-free replaceable filter.With filter change indicator.FeaturesThe device can be operated continuously in the base load stage.Protection rating IP X5 for safety in the bathroom.Colour traffic white similar to RAL 9016.For single-room ventilation with a single fan.Filter ISO Coarse 30 % (G2), filter change without tools.Cover rotatable by ± 5°, allowing compensation for skewed housing installation.Not speed controllable.Circuit variant: With an additional switch, the base load can be switched on or off (see circuit diagrams on the internet).*Factory settingInstallation / Operation / Maintenance Wiring diagramsInstallation instructions: pdf | online ArticleER-ABVersionMotion detector with intelligent time moduleAir volume20 m³/h / 30 m³/h / 40 m³/h / 60 m³/h / 100 m³/h / according to factory setting stage 1: 30 m³/h and stage 2: 60 m³/hAir directionExhaust airProtection ratingIP X5Installation locationWall / CeilingSystem typedecentralisedHousing materialPlasticColourtraffic white, similar to RAL 9016Weight0.59 kgWeight with packaging0.75 kgFilter classISO Coarse 30 % (G2)Width281 mmHeight281 mmDepth33 mmWidth with packaging305 mmHeight with packaging450 mmDepth with packaging295 mmTransport medium temperature at IMax40 °CSwitch-on delay0 s / 30 s / 60 s / 90 s / 120 s / Switching on/off of the full load stage via light switch or separate switch possible, 60 sec factory settingSound pressure level15 dB(A) / 16 dB(A) / 23 dB(A) / 35 dB(A) / 48 dB(A) / combined with ER GH; 27 dB(A) / 31 dB(A) / 35 dB(A) / 41 dB(A) / 51 dB(A) combined with ER GH AP/APB/ Information according to DIN 18017-3 with an equivalent absorption area AL = 10 m²Approval numberZ-51.1-478Packaging unit1 pieceRangeBGTIN (EAN)4012799843641Article number0084.0364