Louvre bonnet Ø 100 mm, for outside, fresh and exhaust air
€57.70
Available immediately, delivery time: 1-3 working days
Product information "Louvre bonnet Ø 100 mm, for outside, fresh and exhaust air"
Louvre bonnet for outside, fresh and exhaust air with inserted bird protection grille.
The diameter specification refers to the inside diameter of the CONNECTION PIPE.
The louvre bonnet has a nipple connection (is insertedwithout a connector )
Note:
When the exhaust air system is at a standstill, moisture, snow or dust can enter the pipe system. To prevent moisture from being sucked in with outside air intakes, the air velocity in the free cross-section must not exceed 2 m/s.
Allgemeines Warnzeichen
Warnung vor Handverletzungen
Warnung vor Absturzgefahr
Customers also bought
Spiral duct for the installation of ventilation systemsSpiral duct ØD = inner diameter [mm]Length 1000 mmMaterial: Galvanised sheet steelDesign in accordance with DIN EN 12237Tightness class D according to DIN EN 1507 (highest class of the standard)Intelmann spiral duct Application areas: The Intelmann spiral duct or spiral seam duct is used for air routing of extract air, outside air, exhaust air and supply air in centralised domestic ventilation or controlled domestic ventilation with heat recovery. The ventilation duct is made of galvanised sheet steel. The diameter refers to the internal diameter of the duct. Connecting the Intelmann spiral ducts in the ventilation system: Nipples or pipe connectors are used to connect the spiral ducts in a ventilation system. Fittings such as bends, branch pieces or T-pieces can be connected directly to the spiral duct. Sockets are used to connect fittings (bends / branch pieces / T-pieces) to each other. A spiral duct is compatible with all other fittings with the same diameter. Two spiral ducts are connected with a nipple.