Filter basket with cone filter for 2-part stainless steel intake tower S160

5 filters / replacement filter class G3 for Intelmann intake towerCylindrical replacement filter for the Intelmann intake tower The filter basket is NOT included in the scope of delivery!

INTAKE TOWER MADE FROM POLISHED STAINLESS STEELThe intake tower is made of high-quality, solid stainless steel (V2A). To give the intake tower that certain something, the surface has been polished to 220 grit. Neither wind nor weather can harm this intake tower.The simple and exclusive design makes the intake tower a real eye-catcher, even in the entrance area of your home!The Intelmann intake tower series impresses with its simple elegance paired with great functionality: The integrated stop bead in the main pipe is used to hold the filter basket at the top end of the pipe. The filter can be changed without tools.Excellent features of the intake towerSturdy and durable construction made of solid, high-quality stainless steelCorrosion-resistant and robustStainless steel V2AFinishing: polished surface (220 grit)UV and weather resistantEasy to cleanIntelmann quality productTECHNICAL DATA The stainless steel 2-piece smooth tube intake tower with louvre bonnet is suitable for all standard soil pipes that are connected to your ventilation system, geothermal heat exchanger or chimney.Suitable for the following soil pipes:KG pipe (orange)KG2000 (green)HT pipe (grey)POLO-KAL (blue).The intake tower is supplied in two parts and consists of a smooth pipe and a louvred cover.The smooth tube and louvred bonnet are made of V2A stainless steel (220 grit polished). The louvre cover has an inserted bird protection grille (mesh size 10 x 10 mm). Installation is quick and uncomplicated:Allow the ground tube to protrude at least 30 cm - 40 cm above ground level.Cut off the sleeve (the thick end of the ground tube) Place the smooth pipe over the soil pipeInsert the louvre cap into the smooth pipeDONE!!!!ATTENTION!!! The AT2A-S100 / AT2A-S100-500 only fits into the KG pipe socket and is not placed over the KG pipe! If the intake tower is used for the intake of outside air, a filter basket including a coarse dust filter should also be installed in order to catch heavy impurities from your ventilation system.The filter basket is inserted into the smooth tube of the intake tower just below the louvre bonnet and is held in place by a stop bead. Replacing the filter is correspondingly straightforward.No additional installation material, tools or fixings are required, as the ground pipe ensures that the intake tower stands securely.Volume flow:AT2A-S100 / AT2A-S100-500 = 175 m³/hAT2A-S110 / AT2A-S110-500 = 270 m³/hAT2A-S125 / AT2A-S125-500 = 270 m³/hAT2A-S160 / AT2A-S160-500 = 430 m³/hAT2A-S200 / AT2A-S200-500 = 690 m³/hAT2A-S250 / AT2A-S250-500 = 1000 m³/h AT2A-S315 / AT2A-S315-500 = 1600 m³/hNote: When the exhaust air system is at a standstill, moisture, snow or dust can enter the pipe system. In order to prevent moisture from being sucked in with outside air intake, the air velocity in the free cross-section must not exceed 2 m/s.

Intelmann® Intake Tower with Stainless Steel Flange Ø 110–400 mm – 2-piece, Smooth Pipe with Louvered Hood, Brushed (Grit 220)The Intelmann® Stainless Steel Intake Tower with Flange is the premium solution for outdoor air intake for ventilation systems and geothermal heat exchangers. Made from solid stainless steel V2A (1.4301) and finished with an elegant brushed surface (grit 220), it impresses with maximum durability, weather resistance, and a modern, high-quality appearance.The integrated all-round flange (75 mm) allows secure and stable mounting on site-specific foundations or connection surfaces. This makes the intake tower especially suitable for fixed installations outdoors.The proven Intelmann design with integrated stop bead allows easy installation of an optional filter basket in the upper pipe section. The filter change is tool-free, quick, and convenient. The louvered hood with integrated bird protection mesh reliably protects against rain, dirt, and foreign objects.Advantages at a glance:✅ Solid stainless steel V2A – rust-free, durable, and corrosion-resistant✅ All-round flange (75 mm) – for secure and stable mounting✅ Elegant surface – brushed (grit 220)✅ 2-piece system – easy assembly and maintenance✅ Tool-free filter change – thanks to integrated stop bead✅ Weather resistant – UV, rain, and frost resistantTechnical details:✔ Product name: Intelmann® Intake Tower with Flange✔ Material: Stainless steel V2A (1.4301), brushed (grit 220)✔ Diameter range: Ø 110 – 400 mm✔ Construction: 2-piece (smooth pipe + louvered hood)✔ Flange: All-round, 75 mm✔ Bird protection mesh: Integrated, mesh size 10 x 10 mm✔ Surface: Brushed, easy to maintainCompatibility:Suitable for common underground pipes:✔ KG pipe (orange)✔ KG2000 (green)✔ HT pipe (grey)✔ POLO-KAL (blue)Installation instructions:Installation is simple and secure:– Let the underground pipe protrude approx. 30–40 cm above ground level– Remove the socket (thickened pipe end)– Slide the smooth pipe over the underground pipe– Insert the louvered hood– Fix the flange to the on-site foundationVolume flows (depending on diameter):✔ Ø 100 mm: approx. 175 m³/h✔ Ø 110 / 125 mm: approx. 270 m³/h✔ Ø 160 mm: approx. 430 m³/h✔ Ø 200 mm: approx. 690 m³/h✔ Ø 250 mm: approx. 1000 m³/h✔ Ø 315 mm: approx. 1600 m³/hApplication & notes:The intake tower serves for protected outdoor air intake and ensures a secure air supply to ventilation systems. For hygienic applications, the use of a filter basket with coarse dust filter is recommended.When the system is idle, moisture, snow, or dust can enter the pipe system. To minimise this, the air velocity in the free cross-section should not exceed 2 m/s.With the Intelmann® Stainless Steel Intake Tower with Flange, you receive a robust, durable, and installation-friendly solution for professional ventilation installations.

INTAKE TOWER MADE OF INDIVIDUALLY PAINTED STAINLESS STEELThe intake tower is made of high-quality, solid stainless steel (V2A). To make the intake tower even more weather-resistant, it is elaborately spray-painted in the RAL or DB colour of your choice. Neither wind nor weather can harm this intake tower! The painted surface gives you a simple and exclusive design. Your intake tower becomes a true eye-catcher, even in the entrance area of your house! You can choose from 5 modern colours for the paintwork. To give your intake tower an individual touch, we of course also accommodate your colour preferences. The Intelmann intake tower series impresses with simple elegance combined with great functionality: Quick and easy installation Integrated stop bead in the main pipe serves to hold the filter basket at the upper end of the pipe Filter change without toolsFor a harmonious overall appearance, the intake tower is painted to match your windows, doors or facade and thus fits perfectly into the appearance of your house! Such an intake tower does not need to be hidden! Outstanding features of the intake towerStable and durable construction made of solid, high-quality stainless steel Corrosion-resistant and insensitive Material: stainless steel V2A (1.4301) Finishing: spray painting in trendy RAL or DB colours 100% UV and weather resistantAbsolutely low maintenanceIntelmann quality productTECHNICAL DATA The stainless steel intake tower, 2-piece smooth pipe with louvre hood, is suitable for all common underground pipes connected to your ventilation system, ground heat exchanger or chimney.Suitable for the following underground pipes: KG pipe (orange) KG2000 (green) HT pipe (grey) POLO-KAL (blue). The intake tower is delivered in two parts and consists of a smooth pipe and a louvre hood. The smooth pipe and louvre hood are made of stainless steel V2A (grain 220 polished). The louvre hood has an inserted bird protection grid (mesh size 10 x 10 mm). Installation is quick and straightforward: !!!ATTENTION!!! The diameter 100 mm (AT2A-100) fits only inside the KG pipe socket and is not slipped over the KG pipe! For secure standing, we recommend wall mounting here with a clamp.Allow the underground pipe to protrude at least 30 cm – 40 cm above ground level.Cut off the socket (the thick end of the underground pipe)  Slip the smooth pipe over the underground pipe Insert the louvre hood into the smooth pipe DONE!We recommend additionally screwing the louvre hood to the smooth pipe. If the intake tower is used for the intake of outside air, a filter basket including a coarse dust filter should also be installed to catch heavy contamination from your ventilation system. The filter basket is inserted just below the louvre hood into the smooth pipe of the intake tower and is held by a stop bead. The filter change is correspondingly straightforward. No additional mounting materials, tools or fasteners are necessary, as the underground pipe ensures the secure standing of the intake tower. Volume flow: AT2A-S100 / AT2A-S100-500 = 175 m³/h AT2A-S110 / AT2A-S110-500 = 270 m³/hAT2A-S125 / AT2A-S125-500 = 270 m³/hAT2A-S160 / AT2A-S160-500 = 430 m³/hAT2A-S200 / AT2A-S200-500 = 690 m³/h AT2A-S250 / AT2A-S250-500 = 1000 m³/h AT2A-S315 / AT2A-S315-500 = 1600 m³/h Note: When the exhaust air system is at a standstill, moisture, snow or dust can enter the pipe system. To prevent moisture from being drawn in during outside air intake, the air velocity in the free cross-section must not exceed 2 m/s.