Intelmann replacement air filter for PushPull PP 45 single-room ventilation unit, installation in slide-in unit on the outside, filter class ISO Coarse 45 % (G3), 2 pieces, equivalent to Maico item no. 0093.0274

PP 45 K - Brief InformationFinal assembly set for single-room ventilation unit PushPull 45 K with heat recovery, consisting of fan, ceramic heat exchanger, internal cover with flap drive and 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with electric flap, necessary accessories: raw construction sleeve, external cover or reveal element and room air control RLS 45 K or RLS 45 O, optional accessories: wall block, sensors, power unit and EnOcean expansion modulePP 45 K - Product DescriptionVersionThe units can be used to build a complete ventilation system according to DIN 1946-6 including exhaust air units via a central control (RLS 45 K).With electric flap.Clear commissioning software when using the RLS 45 K control facilitates commissioning. Settings can be saved and transferred to other controls.Optional AccessoriesWall block PP 45 MBPower unit PP 45 LTEnOcean expansion module PP 45 EOEnOcean actor PP 45 ACTHumidity sensor PP 45 HYI and PP 45 HYCO2 sensor PP 45 CO2VOC sensor PP 45 VOCAir filters, replacement PP 45 G2, PP 45 G3 and PP 45 G2PApprovals and CertificatesDIBt approval Z-51.3-416.Test report according to EN 13141-8.Entry in TZWL Bulletin.Heat ExchangerWith the high-performance heat exchanger and the highly efficient EC fan, the units achieve a heat recovery rate of 84.3 % at the reference volume flow according to EN 13141-8.Installation InstructionsInstallation takes place in 2 steps:Installation of the raw construction sleeve PP 45 RHK (DN 160) or PP 45 RHL (DN 160) as well as an external cover into a core drill hole DN 160 with a slope of 1-2 %.We recommend carrying out the core drilling with DN 182 and aligning the slope of the sleeve using the enclosed polystyrene wedges.The raw construction sleeve is protected against contamination with plaster protection caps.Then follows the integration of the final assembly set.No pipe laying necessary and no system balancing required.Electrical ConnectionThe unit is delivered ready for operation.Electrical connection is made via plug connection.Connection to the room air control RLS 45 K or RLS 45 O via pluggable control cables.The 12 VDC power cable of the room air control RLS 45 K / RLS 45 O to the unit is simultaneously the control cable.Condensate DrainThe condensate is drained via an integrated condensate drip edge in the external cover.Special FeaturesThe PP 45 K/O/RC device series is the quietest device series on the market and impresses with sound pressure level values (per ventilation stage and distance 1 m): 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A).The energy efficiency of two units + control impresses with an SPI value of max. 0.12 Wh/m³.Due to the very quiet and energy-saving motors, a very good sensor-controlled operation, the units achieve the energy efficiency class A+.The pipe insert can be removed without tools for cleaning purposes and filter replacement. The two filters are also replaceable without tools.The heat exchanger can also be removed with the help of a tool for cleaning purposes.The units can be operated in 5 different ventilation stages 15/20/30/36/42 m³/h and in 3 operating programs: continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation.Flow-optimised external covers in the accessory programme keep the exhaust air away from the external facade.FeaturesFinal assembly sets for the single-room ventilation unit PushPull 45 with fan, ceramic heat exchanger, internal cover and two integrated filters (ISO Coarse 30 % (G2) and ISO Coarse 45 % (G3)), so that the air is filtered in both directions.To achieve efficient ventilation, we recommend operating the units in pairs.In certain system combinations, an odd number of units is also possible.Necessary AccessoriesRaw construction sleeve RH 160 or RH 160 L.External cover PP 45 AK, PP 45 AE, PP 45 AW, PP 45 AS, PP 45 AKR or PP 45 AKB for external wall mounting or reveal element PP 45 LE for reveal duct mounting.Room air control RLS 45 K or RLS 45 O for the final assembly sets PP 45 K and PP 45 O and radio switch DS 45 RC for the radio unit PP 45 RC.Several units (max. 6) can be controlled simultaneously via a room air control RLS 45 K or RLS 45 O.When using the radio switch DS 45 RC, the number of units is not limited, provided the units are within range of the radio switches.Installation / Operation / Maintenance Wiring diagramsQuick start RV 2 and PP 45: pdf | onlineSafety information sheet Push Pull: pdf | onlineInstallation instructions final assembly set PP 45: pdf | onlineInstallation manual: pdf | onlineOperating instructions: pdf | onlineInstallation instructions raw construction set PP 45 and PPB 30: pdf | online ArticlePP 45 KVersionComfort version, electric flapVolume flow15 m³/h / 20 m³/h / 30 m³/h / 36 m³/h / 42 m³/hSEC average-40.06 kWh/(m²*a)Energy efficiency classA+Rated voltage12 V DCSPI value according to DIN EN 13141-80.11 Wh/m³Maximum power consumption1.2 W / 1.7 W / 2.1 W / 2.8 W / 3.5 WProtection classIP 00DIBt approvalyesInstallation positionhorizontalSystem typedecentralisedHousing materialPlasticHeat exchanger materialCeramicColourtraffic white, similar to RAL 9016Weight3.15 kgWeight with packaging3.89 kgFilter typeExternal and exhaust air filterFilter classISO Coarse 30 % (G2) / ISO Coarse 45 % (G3)Connection diameter160 mmWidth246 mmHeight246 mmDepth282 mmWidth with packaging265 mmHeight with packaging247 mmDepth with packaging300 mmRequired wall breakthrough162 to 182 mmMinimum wall thickness265 mm (if the insert is flush with the wall sleeve)Heat recovery rate at reference volume flow according to DIN EN 13141-884.3 %Required room air controlRLS 45 K / RLS 45 OSound pressure level21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A) / Distance 1 m, free field conditionsRated max. element standardised sound level difference Dn,w51 dB / measured with PP 45 LE and flap closed; 51 dB measured with PP45 AE, 2x PP45 SE, flap closed; 46 dB measured with PP45 LE, PP45 LEW90, flap openApproval numberZ-51.3-416 / Z-51.3-416Packaging unit1 pieceRangeKGTIN (EAN)4012799952411Article number0095.0241

PP 45 O - Brief InformationFinal assembly set for single-room ventilation unit PushPull 45 K with heat recovery, consisting of fan, ceramic heat exchanger, interior cover with manual flap closure and 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, version: with manual flap, necessary accessories: raw construction sleeve, external cover or reveal element and room air control RLS 45 K or RLS 45 O, optional accessories: wall block, sensors, power unit and EnOcean expansion modulePP 45 O - Product DescriptionVersionThe units can be used to build a complete ventilation system according to DIN 1946-6 including exhaust air units via a central control (RLS 45 K).With manual flap.Clear commissioning software when using the RLS 45 K control facilitates commissioning. Settings can be saved and transferred to other controls.Optional AccessoriesWall block PP 45 MBPower unit PP 45 LTEnOcean expansion module PP 45 EOEnOcean actor PP 45 ACTHumidity sensor PP 45 HYI and PP 45 HYCO2 sensor PP 45 CO2VOC sensor PP 45 VOCAir filters, spare PP 45 G2, PP 45 G3 and PP 45 G2PApprovals and CertificatesDIBt approval Z-51.3-416.Test report according to EN 13141-8.Entry in TZWL bulletin.Heat ExchangerWith the high-performance heat exchanger and the highly efficient EC fan, the units achieve a heat supply rate of 84.3% at the reference volume flow according to EN 13141-8.Installation InstructionsInstallation is carried out in 2 steps:Installation of the raw construction sleeve PP 45 RHK (DN 160) or PP 45 RHL (DN 160) as well as an external cover into a core drill hole DN 160 with a slope of 1-2%.We recommend carrying out the core drilling with DN 182 and aligning the slope of the sleeve using the enclosed polystyrene wedges.The raw construction sleeve is protected against contamination with plaster protection caps.Then follows the integration of the final assembly set.No pipe laying necessary and no balancing of the system required.Electrical ConnectionThe unit is delivered ready for operation.Electrical connection is made via plug connection.Connection to the room air control RLS 45 K or RLS 45 O via pluggable control cables.The 12 VDC power cable of the room air control RLS 45 K / RLS 45 O to the unit is simultaneously the control cable.Condensate DrainThe condensate is drained via an integrated condensate drip edge in the external cover.Special FeaturesThe PP 45 K/O/RC series is the quietest series on the market and impresses with sound pressure level values (per ventilation stage and distance 1 m): 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A).The energy efficiency of two units + control impresses with an SPI value of max. 0.12 Wh/m³.Due to the very quiet and energy-saving motors, a very good sensor-controlled operation, the units achieve the energy efficiency class A+.The pipe insert can be removed without tools for cleaning purposes and filter replacement. The two filters are also replaceable without tools.The heat exchanger can also be removed with the help of a tool for cleaning purposes.The units can be operated in 5 different ventilation stages 15/20/30/36/42 m³/h and in 3 operating programmes: continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation.Flow-optimised external covers in the accessory programme keep the exhaust air away from the external facade.FeaturesFinal assembly sets for the single-room ventilation unit PushPull 45 with fan, ceramic heat exchanger, interior cover and two integrated filters (ISO Coarse 30% (G2) and ISO Coarse 45% (G3)), so that the air is filtered in both directions.To achieve efficient ventilation, we recommend operating the units in pairs.In certain system combinations, an odd number of units is also possible.Necessary AccessoriesRaw construction sleeve RH 160 or RH 160 L.External cover PP 45 AK, PP 45 AE, PP 45 AW, PP 45 AS, PP 45 AKR or PP 45 AKB for external wall mounting or reveal element PP 45 LE for reveal duct mounting.Room air control RLS 45 K or RLS 45 O for the final assembly sets PP 45 K and PP 45 O and radio switch DS 45 RC for the radio unit PP 45 RC.Several units (max. 6) can be controlled simultaneously via a room air control RLS 45 K or RLS 45 O.When using the radio switch DS 45 RC, the number of units is not limited, provided the units are within range of the radio switches. Installation / Operation / Maintenance Wiring DiagramsQuick Start RV 2 and PP 45: pdf | onlineSafety Information Sheet Push Pull: pdf | onlineInstallation Instructions Final Assembly Set PP 45: pdf | onlineInstallation Manual: pdf | onlineOperating Instructions: pdf | onlineInstallation Instructions Raw Construction Set PP 45 and PPB 30: pdf | online ArticlePP 45 OVersionObject versionAirflow volume15 m³/h / 20 m³/h / 30 m³/h / 36 m³/h / 42 m³/hSEC average-40.06 kWh/(m²*a)Energy efficiency classA+Rated voltage12 V DCSPI value according to DIN EN 13141-80.11 Wh/m³Maximum power consumption1.2 W / 1.7 W / 2.1 W / 2.8 W / 3.5 WProtection classIP 00DIBt approvalyesInstallation positionhorizontalSystem typedecentralisedMaterialPlasticHousing materialPlasticHeat exchanger materialCeramicColourtraffic white, similar to RAL 9016Weight3.08 kgWeight with packaging3.83 kgFilter typeExternal and exhaust air filterFilter classISO Coarse 30% (G2) / ISO Coarse 45% (G3)Connection diameter160 mmWidth246 mmHeight246 mmDepth282 mmWidth with packaging265 mmHeight with packaging247 mmDepth with packaging300 mmRequired wall breakthrough162 to 182 mmMinimum wall thickness265 mm (when the insert is flush with the wall sleeve)Heat supply rate at reference volume flow according to DIN EN 13141-884.3%Required room air controlRLS 45 K / RLS 45 OSound pressure level21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A) / Distance 1 m, free field conditionsRated max. element standardised sound level difference Dn,w51 dB / measured with PP 45 LE and flap closed; 51 dB measured with PP45 AE, 2x PP45 SE, flap closed; 46 dB measured with PP45 LE, PP45 LEW90, flap openApproval numberZ-51.3-416 / Z-51.3-416Packaging unit1 pieceRangeKGTIN (EAN)4012799952404Article number0095.0240

PP 45 RC - Brief InformationFinal assembly set for single-room ventilation unit PushPull 45 K with heat recovery, consisting of fan, ceramic heat exchanger, interior cover with radio control and flap drive, 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, version: with radio control and electric flap, necessary accessories: raw construction sleeve, external cover or reveal element and radio switch DS 45 RC, optional accessories: wall block, sensors, power unit, EnOcean actorPP 45 RC - Product DescriptionVersionWith radio control.With electric flap.Optional AccessoriesWall block PP 45 MBPower unit PP 45 LTEnOcean expansion module PP 45 EOEnOcean actor PP 45 ACTHumidity sensor PP 45 HYI and PP 45 HYCO2 sensor PP 45 CO2VOC sensor PP 45 VOCAir filters, replacement PP 45 G2, PP 45 G3 and PP 45 G2PApprovals and CertificatesDIBt approval Z-51.3-416.Test report according to EN 13141-8.Entry in TZWL bulletin.Heat ExchangerWith the high-performance heat exchanger and the highly efficient EC fan, the units achieve a heat supply rate of 84.3% at the reference volume flow according to EN 13141-8.Installation InstructionsInstallation is carried out in 2 steps:Installation of the raw construction sleeve PP 45 RHK (DN 160) or PP 45 RHL (DN 160) as well as an external cover into a core drill hole DN 160 with a slope of 1-2%.We recommend executing the core drill hole with DN 182 and aligning the slope of the sleeve using the enclosed polystyrene wedges.The raw construction sleeve is protected against contamination with plaster protection caps.Then follows the integration of the final assembly set.No pipe laying necessary and no balancing of the system required.Electrical ConnectionThe unit is delivered ready for operation.Electrical connection is made via plug connection.Connection to room air control RLS 45 K or RLS 45 O via pluggable control cables.The 12 VDC power cable of the room air control RLS 45 K / RLS 45 O to the unit is simultaneously the control cable.Condensate DrainThe condensate is drained via an integrated condensate drip edge in the external cover.Special FeaturesThe PP 45 K/O/RC product line is the quietest product line on the market and impresses with sound pressure level values (per ventilation stage and distance 1 m): 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A).The energy efficiency of two units + control impresses with an SPI value of max. 0.12 Wh/m³.Due to the very quiet and energy-saving motors, a very good sensor-controlled operation, the units achieve the energy efficiency class A+.The pipe insert can be removed without tools for cleaning purposes and filter replacement. The two filters are also replaceable without tools.The heat exchanger can also be removed with the help of a tool for cleaning purposes.The units can be operated in 5 different ventilation stages 15/20/30/36/42 m³/h and in 3 operating programs: continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation.Flow-optimised external covers in the accessory programme keep the exhaust air away from the external facade.FeaturesFinal assembly sets for the single-room ventilation unit PushPull 45 with fan, ceramic heat exchanger, interior cover and two integrated filters (ISO Coarse 30% (G2) and ISO Coarse 45% (G3)), so that the air is filtered in both directions.To achieve efficient ventilation, we recommend operating the units in pairs.In certain system combinations, an odd number of units is also possible.Necessary AccessoriesRaw construction sleeve RH 160 or RH 160 L.External cover PP 45 AK, PP 45 AE, PP 45 AW, PP 45 AS, PP 45 AKR or PP 45 AKB for external wall mounting or reveal element PP 45 LE for reveal duct mounting.Room air control RLS 45 K or RLS 45 O for the final assembly sets PP 45 K and PP 45 O and radio switch DS 45 RC for the radio unit PP 45 RC.Multiple units (max. 6) can be controlled simultaneously via a room air control RLS 45 K or RLS 45 O.When using the radio switch DS 45 RC, the number of units is not limited, provided the units are within range of the radio switches.Installation / Operation / Maintenance Wiring diagramsQuick start RV 2 and PP 45: pdf | onlineSafety information sheet Push Pull: pdf | onlineInstallation instructions final assembly set PP 45: pdf | onlineInstallation manual: pdf | onlineOperating instructions: pdf | onlineInstallation instructions raw construction set PP 45 and PPB 30: pdf | onlineOperating instructions for PP 45/PPB 30 ArticlePP 45 RCVersionRadio version, electric flapVolume flow15 m³/h / 20 m³/h / 30 m³/h / 36 m³/h / 42 m³/hSEC average-39.72 kWh/(m²*a)Energy efficiency classA+Rated voltage230 VSPI value according to DIN EN 13141-80.12 Wh/m³Maximum power consumption1.2 W / 1.7 W / 2.1 W / 2.8 W / 3.5 WProtection classIP 00DIBt approvalyesInstallation positionhorizontalSystem typedecentralisedMaterialPlasticMaterial housingPlasticMaterial heat exchangerCeramicColourtraffic white, similar to RAL 9016Weight3.18 kgWeight with packaging3.92 kgFilter typeExternal and exhaust air filterFilter classISO Coarse 30% (G2) / ISO Coarse 45% (G3)Connection diameter160 mmWidth246 mmHeight246 mmDepth282 mmWidth with packaging260 mmHeight with packaging247 mmDepth with packaging300 mmRequired wall breakthrough162 to 182 mmMinimum wall thickness265 mm (if the insert is flush with the wall sleeve)Heat supply rate at reference volume flow according to DIN EN 13141-884.3%Required room air controlDS 45 RC or RLS 45 K with PP 45 EOSound pressure level21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A) / Distance 1 m, free-field conditionsRated max. element standardised sound level difference Dn,w51 dB / measured with PP 45 LE and flap closed; 51 dB measured with PP45 AE, 2x PP45 SE, flap closed; 46 dB measured with PP45 LE, PP45 LEW90, flap openApproval numberZ-51.3-416 / Z-51.3-416Packaging unit1 pieceRangeKGTIN (EAN)4012799952428Article number0095.0242

RV 2 - Brief InformationFinal assembly set for single-room ventilation unit RotationVent RV 2 with heat recovery, consisting of fan unit, plastic heat exchanger, inner cover, 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, necessary accessories: pre-assembly set, external cover and room air control RLS 45 KRV 2 - Product DescriptionFeaturesFinal assembly set for single-room ventilation unit RotationVent RV 2 with heat recovery, consisting of fan unit, plastic heat exchanger, inner cover, 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, so that the air is filtered in both directions.With the RV 2 units, a complete ventilation system according to DIN 1946-6 including exhaust units can be set up via a central control (RLS 45 K).To achieve efficient ventilation, we recommend operating the units in pairs.In certain system combinations, an odd number of units is also possible.Special FeaturesFlexible installation options using various pre-assembly sets. By positioning in the external wall, around the window, or in the window reveal, the RV 2 integrates unobtrusively into the interior.The innovative approach of a fan unit rotating around its own axis eliminates the typical switching noise of single-room ventilation units.By twisting the fan unit, the air duct is closed after switching off the RV 2 unit. This function is equivalent to an automatic shut-off flap.Thanks to very quiet and energy-saving motors and excellent sensor-controlled operation, the RV 2 units achieve energy efficiency class A+.The fan unit can be removed without tools for cleaning and filter replacement. The two filters are also replaceable without tools.The heat exchanger can be separated from the fan unit for cleaning purposes using a tool.The units can be operated in 5 different ventilation levels 15/22/30/36/42 m³/h and in 3 operating modes: continuous ventilation with heat recovery, cross ventilation, and sensor-controlled automatic operation.Flow-optimised external covers keep exhaust air away from the external facade.Potential condensate is drained via an integrated condensate drip edge in the external cover.Clear commissioning software and plug & play function for standard applications facilitate commissioning. Settings can be saved and transferred to other controls.Necessary AccessoriesPre-assembly set RV 2 (VH, VV, VLR, VLL, VS)Room air control RLS 45 KVia RLS: external covers RV 2 (AH, AV, AL, VS 90E)Optional AccessoriesRoom air control RLS 45 KPower unit PP 45 LTHumidity sensor PP 45 HYHumidity sensor PP 45 HYICO2 sensor PP 45 CO2VOC sensor PP 45 VOCInstallation InstructionsInstallation is carried out in 2 steps:Installation of a RotationVent RV 2 pre-assembly set.The installation sleeve is protected against contamination by plaster protection caps.This is followed by the integration of the final assembly set and the attachment of the external cover.No duct laying necessary.No system balancing necessary.Electrical ConnectionThe unit is delivered ready for operation.Electrical connection is made via plug connection.Connection to the room air control RLS 45 K via control lines.The 12 VDC power line of the room air control RLS 45 K to the unit also serves as the control line. Installation / Operation / Maintenance Wiring diagramsInstallation manual: pdf | onlineOperating instructions: pdf | onlineQuick start RV 2 and PP 45: pdf | onlineInstallation instructions final assembly set RV 2: pdf | onlineSafety information sheet Push Pull: pdf | online ArticleRV 2Airflow volume15 m³/h / 22 m³/h / 30 m³/h / 36 m³/h / 42 m³/hSpeed3,800 1/minSEC average-37.78 kWh/(m²*a)Energy efficiency classARated voltage12 V DCSPI value according to DIN EN 13141-7 (A7)0.14 Wh/m³Maximum power consumption1.2 W / 1.4 W / 1.9 W / 2.2 W / 2.5 WProtection classIP 00Installation locationWallMaterialPlasticHousing materialPlasticHeat exchanger materialPlasticColoursimilar to traffic white RAL 9016Weight2.5 kgWeight with packaging3 kgFilter typeExternal and exhaust air filterFilter classISO Coarse 45% (G3) / ISO Coarse 30% (G2)Width310 mmHeight87 mmDepth305 mmWidth with packaging315 mmHeight with packaging150 mmDepth with packaging400 mmWall thickness365 - 500 mmMedium temperature at IMax40 °CAmbient temperature40 °C to -15 °CHeat provision rate at reference volume flow according to DIN EN 13141-883 %Sound pressure level19 dB(A) / 24 dB(A) / 25 dB(A) / 29 dB(A) / 31 dB(A) / Distance 1 m, free field conditionsRated max. element standardised sound level difference Dn,w/ measured with RV 2 VH, 48 dB closed, 39 dB open; measured with RV 2 VV, 48 dB closed, 39 dB open; measured with RV 2 VLL, 50 dB closed, 45 dB open; measured with RV 2 VLR, 50 dB closed, 45 dB open; measured with RV 2 VS, 56 dB closed, 47 dB openRated sound insulation Rw,R/ measured with RV 2 VH, 24.5 dB closed, 15.5 dB open; measured with RV 2 VV, 24.5 dB closed, 15.5 dB open; measured with RV 2 VLL, 27.5 dB closed, 22.5 dB open; measured with RV 2 VLR, 27.5 dB closed, 22.5 dB open; measured with RV 2 VS, 32.5 dB closed, 23.5 dB openPackaging unit1 pieceRangeKGTIN (EAN)4012799956655Article number0095.0665

CPP 60 - Brief InformationInnovative single-room ventilation unit CPP 60 with heat recovery and radial fan, consisting of EPP housing, plastic cover, fan unit, ceramic heat exchanger, inner cover, 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, necessary accessories: thermally insulated wall sleeve W 90, external cover and room air control RLS 45 KCPP 60 - Product DescriptionFeaturesInnovative single-room ventilation unit CPP 60 with heat recovery and radial fan, consisting of EPP housing, plastic cover, fan unit, ceramic heat exchanger, inner cover, 1 x ISO Coarse 30% (G2) filter and 1 x ISO Coarse 45% (G3) filter, so that the air is filtered twice.With CPP 60 units, a complete ventilation system according to DIN 1946-6 including exhaust air units can be set up via a central control (RLS 45 K).To achieve efficient ventilation, we recommend operating the units in pairs.In certain system combinations, an odd number of units is also possible.Special FeaturesThe CPP 60 is a push-pull unit with an integrated radial fan. This special design gives the CPP 60 a range of unique features.This innovative approach enables a constant volume flow ventilation of up to 60 m³/h. The resulting pressure stability of > 100 Pa guarantees ventilation regardless of weather conditions and installation location and height.The integrated ventilation flap eliminates the typical switching noise of push-pull single-room ventilation units.Thanks to the very quiet and energy-saving radial fan and very good sensor-controlled operation, the CPP 60 units achieve energy efficiency class A.Standard sound level difference; worm guide / air guideThe units can be operated in 5 different ventilation levels 20/30/42/50/60 m³/h and in 3 operating modes: continuous ventilation with heat recovery, cross ventilation and sensor-controlled automatic operation.The simple surface-mounted installation with a core drill hole of 140 mm facilitates the installation of the CPP 60 units.The minimum wall thickness of the external wall is 300 mm in combination with the external cover PP 45 AK. Using the external covers PP 45 AW/AE/AS reduces the required wall thickness to 100 mm.Filter replacement and removal of the heat exchanger can be carried out without tools. This significantly simplifies the maintenance and care of the unit.Clear commissioning software and plug & play function for standard applications facilitate commissioning. Settings can be saved and transferred to other controls.Necessary AccessoriesThermally insulated wall sleeve W 90External cover PP 45 AK/AW/AE/ASRoom air control RLS 45 KOptional AccessoriesPower unit PP 45 LTHumidity sensor PP 45 HYHumidity sensor PP 45 HYICO2 sensor PP 45 CO2VOC sensor PP 45 VOCInstallation InstructionsCore drill hole 140 mm and use of the WW 90 wall sleeve.Attachment of the external cover.Attachment of the unit as a surface-mounted version.Commissioning.Electrical ConnectionConnection of the radial fan unit with 230 V.Connection of the control RLS 45 K via 12 VDC.Connection to the fan unit and room air control RLS 45 K via plug-in control cables. ArticleCPP 60Airflow volume20 m³/h / 30 m³/h / 42 m³/h / 50 m³/h / 60 m³/hSpeed1,800 1/minSEC average-34.66 kWh/(m²*a)Energy efficiency classAType of voltageAlternating currentRated voltage230 VMains frequency50 Hz / 60 HzSPI value according to DIN EN 13141-7 (A7)0.21 Wh/m³Maximum power consumption1.7 W / 2.7 W / 3.9 W / 5.9 W / 8.2 WStand-by power consumption< 1 WProtection classIP 00Power supply cable3 x 1.5 mm²Installation locationWallType of installationSurface-mountedMaterialPlasticHeat exchanger materialCeramicColoursimilar to traffic white RAL 9016Weight5 kgWeight with packaging6.4 kgFilter classISO Coarse 45% (G3) / ISO Coarse 30% (G2)Connection diameter90 mmWidth458 mmHeight593 mmDepth195 mmWidth with packaging510 mmHeight with packaging640 mmDepth with packaging240 mmWall thickness300 mm with PP 45 AK / 100 mm with PP 45 AE/AW/ASMedium temperature40 °CAmbient temperature-20 °C to 40 °CHeat supply rate at reference volume flow according to DIN EN 13141-884.7 %Filter monitoringtime-controlledSound pressure level15 dB(A) / 23 dB(A) / 28 dB(A) / 33 dB(A) / 36 dB(A) / Distance 1 m, free-field conditionsRated max. element standardised sound level difference Dn,w48 dB / measured with PP 45 AK; 49 dB measured with PP 45 AE/AS/AWPackaging unit1 pieceRangeNGTIN (EAN)4012799956679Article number0095.0667