Horizontal flat duct bend 90° 180 mm

Flat trunking made of galvanised sheet steel Width: 100 to 300 mm, height: 50 mm The width and height specifications refer to the internal dimensions of the trunking The total length of the trunking is L = 1000 mm The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this. The flat duct is suitable for a wide range of applications. These range from supply and exhaust air ducts for controlled (domestic) ventilation to use as an exhaust air duct for an extractor bonnet in the kitchen and as a supply air duct for fireplaces or stoves. The duct is suitable for installation under the screed. We recommend our version with internal reinforcement for this purpose. To seal the joints, we recommend our aluminium adhesive tape or aluminium-laminated cold-shrink tape. Both options offer sufficient protection against pressure loss in your pipework system. Flat duct system for controlled domestic ventilation or extractor hoods, 50 mm height. Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible to DIN 4102 class A1 On request: Special parts / dimensions, different heights, also stainless steel V2A (1.4301) and V4A (1.4404) and aluminium

Flat trunking nipple connector made of galvanised sheet steel For direct connection of duct to duct Flat duct system for controlled domestic ventilation or extractor fans 50 mm height Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible according to DIN 4102 class A1 Insertion depth per side 40 mm. On request: Special parts / dimensions, different heights, also in stainless steel 1.4301 and 1.4571 and aluminium. The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this.

Flat duct socket connector for fittings made of galvanised sheet steel. For connecting moulded part to moulded part For connecting two pieces of moulding (bend with bend, bend with T-piece, etc.); NOT suitable for connecting flat duct to flat duct! Flat duct system for controlled domestic ventilation or extractor hoods; 50 mm height; Material: Sendzimir galvanised sheet steel, zinc coating 275g/m², non-combustible according to DIN 4102 class A1; Insertion depth per side 40 mm; On request: special parts / dimensions, different heights, also in stainless steel 1.4301 and 1.4571 and aluminium. The Intelmann flat trunking system is designed according to the socket-nipple principle Flat ducts are connected to each other with flat duct nipple connectors Moulded parts (bends, T-pieces, transition pieces) are connected to each other with a sleeve This allows all moulded parts to be inserted into the trunking. No further connection is required for this.

Product Information „Intelmann® Aluminium Adhesive Tape 50 mm × 45 m – Vapour Barrier, Heat Resistant“The Intelmann® Aluminium Adhesive Tape is the ideal solution for airtight and watertight sealing in ventilation, air conditioning, and insulation technology. It is excellently suited for sealing spiral duct pipes, ventilation ducts, pipelines, as well as for sealing insulating materials and insulation.The high-quality aluminium foil combined with a powerful adhesive ensures immediate and durable adhesion to metallic surfaces. This allows for reliable sealing and permanent closure of butt and longitudinal seams.Thanks to its temperature resistance from -30 °C to +130 °C, the aluminium adhesive tape is suitable for both indoor and outdoor applications. The vapour-tight design prevents moisture ingress and supports the long-term function of ventilation and insulation systems.Advantages at a Glance✅ Ideal for ventilation, air conditioning, and insulation technology✅ High adhesive strength on metallic surfaces✅ Airtight and watertight sealing✅ Vapour-tight sealing✅ Temperature resistant from -30 °C to +130 °C✅ Suitable for indoor and outdoor use✅ Easy and clean applicationTechnical Details✔ Manufacturer: Intelmann®✔ Product type: Aluminium adhesive tape✔ Width: 50 mm✔ Roll length: 45 m✔ Material thickness: 30 µ✔ Design: Single-sided self-adhesive✔ Properties: Vapour-tight, airtight and watertight✔ Temperature range: -30 °C to +130 °CProperties✔ High adhesive strength✔ Good ageing resistance✔ Moisture resistant✔ Temperature resistant✔ Flexible application✔ Suitable for smooth metallic surfacesAreas of Application✔ Ventilation technology✔ Air conditioning technology✔ Insulation technology✔ Plant construction✔ Pipeline construction✔ Metal processingTypical Uses– Sealing spiral duct pipes– Sealing ventilation ducts– Sealing butt and longitudinal seams– Fixing and sealing insulating materials– Repairs on air ducts and metal surfaces– Vapour barriers in ventilation and insulation systemsApplicationClean and dry the substrate.Cut the adhesive tape to the desired length.Remove the backing foil.Apply the adhesive tape without tension and press firmly.With the Intelmann® Aluminium Adhesive Tape 50 mm × 45 m, you receive a reliable and durable solution for professional sealing and bonding work in ventilation, air conditioning, and insulation technology. The high adhesive strength, vapour-tight design, and temperature resistance make it the ideal tool for trades, industry, and technical building equipment.

Product Information “Aluminium Adhesive Tape, Reinforced, 50 mm Wide, 50 m Long”Intelmann® Aluminium Adhesive Tape, Reinforced, 50 mm × 50 m – AKB05050RThe Intelmann® Aluminium Adhesive Tape AKB05050R is the ideal solution for airtight sealing of ventilation and air conditioning systems, insulation, and air duct systems. Thanks to its reinforced design, it is particularly suitable for professional applications in ventilation, air conditioning, and insulation technology.The 120 µm thick aluminium foil is reinforced with a fibreglass mesh (5 × 5 mm), providing high tear resistance, dimensional stability, and durability. At the same time, the tape remains flexible enough to adapt perfectly to various surfaces and component geometries.The high-quality acrylic adhesive ensures a permanently strong bond on metallic surfaces, air ducts, spiral seam pipes, and insulation materials. This makes the tape ideal for sealing butt and longitudinal seams, duct connections, as well as for fixing and sealing insulation.Especially when working with mineral wool lamella mats, the reinforced aluminium adhesive tape shows its advantages. The robust mesh reinforcement ensures a secure connection and a permanently airtight seal.Advantages at a Glance✅ Reinforced aluminium foil with fibreglass mesh✅ High tear resistance and dimensional stability✅ Strong and durable adhesion thanks to acrylic adhesive✅ Airtight sealing of ventilation and air conditioning ducts✅ Ideal for spiral seam pipes and air ducts✅ Perfect for lamella mats and insulation materials✅ Temperature resistant from -20 °C to +120 °CTechnical Details✔ Manufacturer: Intelmann®✔ Product type: Aluminium adhesive tape, reinforced✔ Item number: AKB05050R✔ Width: 50 mm✔ Roll length: 50 m✔ Aluminium foil: 120 µm✔ Fibreglass mesh: 5 × 5 mm✔ Adhesive: Acrylic adhesiveTemperature Resistance✔ Operating temperature: -20 °C to +120 °CProperties✔ Airtight✔ High adhesive strength✔ Tear-resistant✔ Dimensionally stable✔ Age-resistant✔ Moisture-resistant✔ Easy to processAreas of Application✔ Ventilation technology✔ Air conditioning technology✔ Insulation technology✔ Plant construction✔ Industrial plants✔ Residential and commercial constructionTypical Applications– Sealing spiral seam pipes– Sealing air ducts– Sealing butt and longitudinal seams– Fixing and sealing insulation materials– Processing mineral wool lamella mats– Repairs on ventilation and air conditioning systemsProcessing and StorageFor optimal results, the tape should be applied to clean, dry, and grease-free surfaces.Recommended storage conditions:✔ Storage temperature approx. +21 °C✔ Maximum relative humidity 50 %✔ Protect from direct sunlightWith the Intelmann® Aluminium Adhesive Tape AKB05050R, you receive a professional solution for permanently airtight connections in ventilation, air conditioning, and insulation systems. The combination of reinforced aluminium foil, fibreglass mesh, and high-quality acrylic adhesive ensures maximum safety and a long service life of the seal.

Sealing Compound MEZ-PLAST 580 – 310 ml, silver greyThe Sealing Compound MEZ-PLAST 580 is a high-quality, permanently elastic sealant for reliable sealing of air duct systems and technical installations. It is ideally suited for use in ventilation duct construction, plant engineering, and hygienically sensitive areas.The sealant is based on acrylic resin (solvent-crosslinking) and impresses with very good adhesion to metals – even on slightly oily or corrosion-protected surfaces, without the need for prior degreasing.Advantages at a glance:✅ Silicone-free – No silicone residues✅ Very good adhesion – Also on slightly oily and metallic surfaces✅ Permanently elastic – For long-lasting seals✅ Fast curing – Efficient processing✅ Chemical resistant – Suitable for technical applications✅ VDI 6022 compliant – For hygienic requirements in ventilation systems✅ Food safe – Free from lead, chromium and harmful substancesProduct properties:✔ Adheres to all metals✔ Ageing, UV and weather resistant✔ Antibacterial and fungicidal (against fungal infestation)✔ Toxicologically safe✔ Paintable (pre-tests recommended)✔ CFC-free, no AOX components✔ Free from lead, mercury and chromium compoundsTechnical details:✔ Product name: MEZ-PLAST 580✔ Packaging: Cartridge 310 ml✔ Colour: Silver grey✔ Raw material base: Acrylic resin, solvent-crosslinking✔ Curing: approx. 4 mm / 24 h at +23 °C, 50 % r.H.✔ Skin formation time: approx. 10 minutes✔ Shore A hardness: 38✔ Density: approx. 1.05 g/cm³✔ Temperature resistance:– permanent: −40 °C to +80 °C– short-term: up to +100 °C (max. 1 h)✔ Processing temperature: +2 °C to +60 °C✔ Shelf life: approx. 12 months✔ Storage: store frost-freeAssembly & processing:– Ready to use, no mixing required– Application with brush, spatula or spray equipment– Also suitable for slightly oily substrates– Overpaintable after complete curing– Slight material shrinkage possibleAreas of application:– Sealing of ventilation ducts and air duct systems– Plant and apparatus construction– Cleanrooms and industrial applications (e.g. chip manufacturing)– Bonding and sealing of metal jointsThe Sealing Compound MEZ-PLAST 580 offers a powerful, versatile and hygienically safe solution for professional sealing in ventilation and plant engineering.

Sealing Compound MEZ-PLAST 590 SMP – 300 ml, silver greyThe Sealing Compound MEZ-PLAST 590 SMP is a high-quality, elastic and fast-curing one-component sealant for professional use in HVAC systems (Heating, Ventilation, and Air Conditioning). It meets the highest standards for hygiene, emission behaviour, and sustainability.Tested according to DIN EN ISO 846 and suitable for applications in accordance with VDI 6022 and EN 15780, this sealant is ideal for ventilation systems, clean rooms, and grease extraction systems.Advantages at a glance:✅ Suitable for HVAC systems – VDI 6022 / EN 15780 compliant✅ Low emissions (EC 1 Plus) – For sustainable construction (DGNB 2018)✅ Fast curing – Short waiting times✅ Durably elastic – For long-lasting seals✅ Fungicidal & bactericidal – Hygienically safe✅ Silicone-free, solvent-free & isocyanate-free✅ Non-corrosive – Suitable for metalProduct features:✔ Very low shrinkage✔ Good weather and ageing resistance✔ Fast skin formation✔ High temperature resistance✔ Toxicologically safeTechnical details:✔ Product name: MEZ-PLAST 590 SMP✔ Packaging: Cartridge 300 ml✔ Colour: Silver grey✔ System: 1-component SMP sealant✔ Skin formation: approx. 15–20 minutes✔ Curing depth: approx. 3–4 mm / 24 h✔ Processing temperature: +5 °C to +35 °C✔ Temperature resistance: −40 °C to +90 °C✔ Storage life: approx. 12 monthsStandards & Environment:✔ DIN EN ISO 846 – microbiological resistance✔ VDI 6022 / EN 15780 – hygiene in HVAC systems✔ EC 1 Plus – very low emissions✔ DGNB 2018 compliant – sustainable construction✔ REACH compliant – SVHC ≤ 0.1 %Application & areas of use:– Sealing in ventilation and air conditioning systems– HVAC systems– Clean rooms– Grease extraction systems– Plant and apparatus constructionWith the MEZ-PLAST 590 SMP sealing compound, you receive a powerful, hygienically safe, and environmentally friendly solution for professional sealing in sensitive ventilation and plant areas.

Self-tapping screws 4.2x13 mm with hexagon head and pressed-on washer, case-hardened galvanised steel, self-tapping DIN 7504 KThese screws are manufactured in galvanised steel. Self-tapping screws with 6KT head and pressed-on washer are characterised by their head shape (hexagon head with flange) and have a sheet metal thread. When you purchase a packaging unit of DIN 7504 K self-drilling screws, you receive 100 screws. Further important information about the article DIN 7504 Form K - Self-drilling screw with 6KT head with pressed-on washer : Weight per 100 pieces: 0.193 kg d: 4.2 mm; s: 7 mm; l: 13 mm; k: 4.1 mm; lp: 4.5 mm Self-drilling screws made of steel, electrogalvanised, high-quality industrial quality. Self-drilling screws for mounting sheet metal, ventilation ducts, flat ducts, fans, metal rails and car parts. The screws can be easily fastened with a cordless screwdriver without pre-drilling

Product Information „Intelmann® Butyl Cold Shrink Tape, aluminium laminated, 50 mm × 15 m“The Intelmann® Butyl Cold Shrink Tape is a powerful solution for the permanent sealing of air ducts, spiral seam pipes, and ventilation systems. Thanks to its self-vulcanising properties, the tape ensures a permanently airtight and watertight connection and is ideal for both indoor and outdoor applications.The tape is made from high-quality butyl rubber with aluminium lamination and combines high flexibility with excellent adhesion. It adapts perfectly to round and rectangular air ducts as well as uneven surfaces, ensuring reliable sealing of joints, seams, and transitions.A particular advantage is that it can be applied without preheating down to -20 °C. This allows the tape to be used even under challenging weather conditions. In the area of aluflex pipes, insulated flex pipes, and spiral seam pipes, it enables a force-locking and permanently tight connection.Advantages at a Glance✅ Self-vulcanising for permanent sealing✅ Airtight and watertight sealing✅ Application without preheating down to -20 °C✅ High flexibility and adaptability✅ Very high adhesion on metallic surfaces✅ Aluminium lamination for additional protection and stability✅ Suitable for indoor and outdoor useTechnical Details✔ Manufacturer: Intelmann®✔ Product type: Butyl cold shrink tape, aluminium laminated✔ Width: 50 mm✔ Roll length: 15 m✔ Material: Butyl rubber with aluminium lamination✔ Carrier: Pure aluminium foil✔ Carrier colour: Silver / aluminium✔ Butyl colour: Grey✔ Aluminium thickness: 0.04 mm✔ Butyl thickness: 0.80 mm✔ Total thickness: 0.84 mm✔ Covering: Silicone paper✔ Temperature resistance: -20 °C to +80 °CProperties✔ Self-vulcanising✔ Airtight✔ Watertight✔ Permanently elastic✔ High ageing resistance✔ Cold processable✔ High adhesive strengthAreas of Application✔ Ventilation technology✔ Air conditioning technology✔ Insulation technology✔ Plant construction✔ Pipeline construction✔ Industrial applicationsTypical Applications– Sealing of spiral seam pipes– Connection of aluflex pipes– Sealing of insulated flex pipes– Sealing of butt and longitudinal seams– Sealing of air ducts– Sealing of transitions and connection points– Repair and resealing of existing ventilation systemsApplicationClean and dry the substrate.Remove the protective paper.Apply the tape to the joint without tension.Press firmly and overlap when bonding.The material adapts to the surface and forms a permanently tight connection.With the Intelmann® Butyl Cold Shrink Tape 50 mm × 15 m, you receive a professional and durable sealing solution for demanding applications in ventilation, air conditioning, and insulation technology. The combination of high adhesion, self-vulcanisation, and aluminium lamination ensures permanently secure and airtight connections.

Intelmann® Insulation Mat / Insulation Mat, self-adhesive – Insulation thickness 13 / 19 / 25 mmThe Intelmann® insulation mat made of elastomeric soft foam (FEF) is the professional solution for thermal insulation, cold insulation and condensation prevention in ventilation, air conditioning and piping systems. Thanks to the closed-cell structure, it offers excellent insulation performance and reliably protects against energy loss and moisture ingress.The self-adhesive version allows for quick, clean and secure installation without additional adhesive. Due to its high flexibility, the insulation mat can be optimally adapted to different shapes and surfaces – ideal for pipes, ducts and technical equipment.With a very good thermal conductivity of 0.034 to 0.037 W/(m·K) as well as a high water vapour resistance (≥ 10,000 µ), the insulation mat ensures effective insulation and reliably prevents condensation formation. In addition, it meets the fire protection class B-s3, d0 and is self-extinguishing.Advantages at a glance:✅ Excellent insulation performance – Reduces heat loss and energy consumption✅ Self-adhesive – Fast and easy processing without additional glue✅ Closed-cell – Very good moisture and vapour barrier✅ Flexible & adaptable – Ideal for pipes, ducts and surfaces✅ Fire protection compliant – Class B-s3, d0, self-extinguishing✅ Hygienic – No bacterial or fungal growthTechnical details:✔ Product name: Intelmann® Insulation Mat / Insulation Mat✔ Material: Elastomeric soft foam (FEF)✔ Cell structure: Closed✔ Insulation thicknesses: 13 / 19 / 25 mm✔ Roll dimensions: • 13 mm: 10 m x 1 m • 19 mm: 7 m x 1 m • 25 mm: 5 m x 1 m✔ Colour: Black / Anthracite✔ Temperature range: -50 °C to +85 °C✔ Thermal conductivity: 0.034 – 0.037 W/(m·K)✔ Water vapour resistance: ≥ 10,000 µ✔ Fire protection class: B-s3, d0✔ Fire behaviour: Self-extinguishing, no droplets, no flame spreadTypical areas of application:The insulation mat is ideal for insulating ventilation ducts, pipelines, air conditioning and refrigeration systems. It reduces heat loss, prevents condensation and improves the energy efficiency of technical systems. It is also used in plant construction and industrial applications for thermal and acoustic insulation.Installation instructions:For optimal adhesion, the surface should be clean, dry and free of grease. The mat is cut to size, the protective film removed and then pressed down evenly. Overlaps and joints can be additionally sealed with suitable adhesive tape to ensure continuous insulation.With the Intelmann® insulation mat, you receive a powerful, durable and installation-friendly solution for professional insulation and insulating work.