Aluminium weather protection grille Ø 125 mm

Slide-in backflow flap / internal non-return flap Nominal width 100 mm to 200 mm Opens smoothly, low pressure loss Closes securely, no noise, no rattling The damper is inserted into the ventilation duct For vertical and horizontal installation Housing: Galvanised steel Damper blade: Aluminium Shaft and spring: Stainless steel The non-return damper is used in round ventilation ducts to prevent air backflow. The casing is made of galvanised sheet steel. The damper blades are made of aluminium, the shaft and spring are made of stainless steel. The internal rubber seal reduces noise. The outer foam strip provides a good seal and secures the non-return flap in the pipe. The non-return damper is designed for operation at ambient temperatures up to 60°C, for the transport of clean air, free of coarse dust, grease, chemical vapours and other impurities.

Slide-in backflow flap / internal non-return flap Nominal width 100 mm to 200 mm Opens smoothly, low pressure loss Closes securely, no noise, no rattling The damper is inserted into the ventilation duct For vertical and horizontal installation Housing: Galvanised steel Damper blade: Aluminium Shaft and spring: Stainless steel The non-return damper is used in round ventilation ducts to prevent air backflow. The casing is made of galvanised sheet steel. The damper blades are made of aluminium, the shaft and spring are made of stainless steel. The internal rubber seal reduces noise. The outer foam strip provides a good seal and secures the non-return flap in the pipe. The non-return damper is designed for operation at ambient temperatures up to 60°C, for the transport of clean air, free of coarse dust, grease, chemical vapours and other impurities.

Pre-laminating tape 4 mm x 12 mm Length: 10m / 20m Colour: Grey without firmly laminated silicone film Material: closed-cell polyethylene foam Self-adhesive on one side Temperature resistance: from - 30 to + 80 °C fulfils the hygienic requirements for use in air conditioning systems in accordance with VDI 6022 Reduction of noise transmission Motion damping Condensation water resistance: very good Versatile sealing and sealing tape/ suitable for a wide range of industrial and construction applications

Sealing Compound MEZ-PLAST 580 – 310 ml, silver greyThe Sealing Compound MEZ-PLAST 580 is a high-quality, permanently elastic sealant for reliable sealing of air duct systems and technical installations. It is ideally suited for use in ventilation duct construction, plant engineering, and hygienically sensitive areas.The sealant is based on acrylic resin (solvent-crosslinking) and impresses with very good adhesion to metals – even on slightly oily or corrosion-protected surfaces, without the need for prior degreasing.Advantages at a glance:✅ Silicone-free – No silicone residues✅ Very good adhesion – Also on slightly oily and metallic surfaces✅ Permanently elastic – For long-lasting seals✅ Fast curing – Efficient processing✅ Chemical resistant – Suitable for technical applications✅ VDI 6022 compliant – For hygienic requirements in ventilation systems✅ Food safe – Free from lead, chromium and harmful substancesProduct properties:✔ Adheres to all metals✔ Ageing, UV and weather resistant✔ Antibacterial and fungicidal (against fungal infestation)✔ Toxicologically safe✔ Paintable (pre-tests recommended)✔ CFC-free, no AOX components✔ Free from lead, mercury and chromium compoundsTechnical details:✔ Product name: MEZ-PLAST 580✔ Packaging: Cartridge 310 ml✔ Colour: Silver grey✔ Raw material base: Acrylic resin, solvent-crosslinking✔ Curing: approx. 4 mm / 24 h at +23 °C, 50 % r.H.✔ Skin formation time: approx. 10 minutes✔ Shore A hardness: 38✔ Density: approx. 1.05 g/cm³✔ Temperature resistance:– permanent: −40 °C to +80 °C– short-term: up to +100 °C (max. 1 h)✔ Processing temperature: +2 °C to +60 °C✔ Shelf life: approx. 12 months✔ Storage: store frost-freeAssembly & processing:– Ready to use, no mixing required– Application with brush, spatula or spray equipment– Also suitable for slightly oily substrates– Overpaintable after complete curing– Slight material shrinkage possibleAreas of application:– Sealing of ventilation ducts and air duct systems– Plant and apparatus construction– Cleanrooms and industrial applications (e.g. chip manufacturing)– Bonding and sealing of metal jointsThe Sealing Compound MEZ-PLAST 580 offers a powerful, versatile and hygienically safe solution for professional sealing in ventilation and plant engineering.

Sealing Compound MEZ-PLAST 590 SMP – 300 ml, silver greyThe Sealing Compound MEZ-PLAST 590 SMP is a high-quality, elastic and fast-curing one-component sealant for professional use in HVAC systems (Heating, Ventilation, and Air Conditioning). It meets the highest standards for hygiene, emission behaviour, and sustainability.Tested according to DIN EN ISO 846 and suitable for applications in accordance with VDI 6022 and EN 15780, this sealant is ideal for ventilation systems, clean rooms, and grease extraction systems.Advantages at a glance:✅ Suitable for HVAC systems – VDI 6022 / EN 15780 compliant✅ Low emissions (EC 1 Plus) – For sustainable construction (DGNB 2018)✅ Fast curing – Short waiting times✅ Durably elastic – For long-lasting seals✅ Fungicidal & bactericidal – Hygienically safe✅ Silicone-free, solvent-free & isocyanate-free✅ Non-corrosive – Suitable for metalProduct features:✔ Very low shrinkage✔ Good weather and ageing resistance✔ Fast skin formation✔ High temperature resistance✔ Toxicologically safeTechnical details:✔ Product name: MEZ-PLAST 590 SMP✔ Packaging: Cartridge 300 ml✔ Colour: Silver grey✔ System: 1-component SMP sealant✔ Skin formation: approx. 15–20 minutes✔ Curing depth: approx. 3–4 mm / 24 h✔ Processing temperature: +5 °C to +35 °C✔ Temperature resistance: −40 °C to +90 °C✔ Storage life: approx. 12 monthsStandards & Environment:✔ DIN EN ISO 846 – microbiological resistance✔ VDI 6022 / EN 15780 – hygiene in HVAC systems✔ EC 1 Plus – very low emissions✔ DGNB 2018 compliant – sustainable construction✔ REACH compliant – SVHC ≤ 0.1 %Application & areas of use:– Sealing in ventilation and air conditioning systems– HVAC systems– Clean rooms– Grease extraction systems– Plant and apparatus constructionWith the MEZ-PLAST 590 SMP sealing compound, you receive a powerful, hygienically safe, and environmentally friendly solution for professional sealing in sensitive ventilation and plant areas.